[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [RFC PATCH 10/24] ARM: GICv3: enable ITS and LPIs on the host



On Wed, 28 Sep 2016, Andre Przywara wrote:
> Now that the host part of the ITS code is in place, we can enable the
> ITS and also LPIs on each redistributor to get the show rolling.
> At this point there would be no LPIs mapped, as guests don't know about
> the ITS yet.
> 
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>

Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>


>  xen/arch/arm/gic-its.c |  4 ++++
>  xen/arch/arm/gic-v3.c  | 19 +++++++++++++++++++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/xen/arch/arm/gic-its.c b/xen/arch/arm/gic-its.c
> index b7aa918..6bac422 100644
> --- a/xen/arch/arm/gic-its.c
> +++ b/xen/arch/arm/gic-its.c
> @@ -449,6 +449,10 @@ int gicv3_its_init(struct host_its *hw_its)
>      its_send_cmd_mapc(hw_its, smp_processor_id(), smp_processor_id());
>      its_send_cmd_sync(hw_its, smp_processor_id());
>  
> +    /* Now enable interrupt translation on that ITS. */
> +    reg = readl_relaxed(hw_its->its_base + GITS_CTLR);
> +    writel_relaxed(reg | GITS_CTLR_ENABLE, hw_its->its_base + GITS_CTLR);
> +
>      return 0;
>  }
>  
> diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
> index b9387a3..57009c6 100644
> --- a/xen/arch/arm/gic-v3.c
> +++ b/xen/arch/arm/gic-v3.c
> @@ -642,6 +642,21 @@ static void gicv3_rdist_init_lpis(void __iomem * 
> rdist_base)
>      gicv3_its_setup_collection(smp_processor_id());
>  }
>  
> +/* Enable LPIs on this redistributor (only useful when the host has an ITS. 
> */
> +static bool gicv3_enable_lpis(void)
> +{
> +    uint32_t val;
> +
> +    val = readl_relaxed(GICD_RDIST_BASE + GICR_TYPER);
> +    if ( !(val & GICR_TYPER_PLPIS) )
> +        return false;
> +
> +    val = readl_relaxed(GICD_RDIST_BASE + GICR_CTLR);
> +    writel_relaxed(val | GICR_CTLR_ENABLE_LPIS, GICD_RDIST_BASE + GICR_CTLR);
> +
> +    return true;
> +}
> +
>  static int __init gicv3_populate_rdist(void)
>  {
>      int i;
> @@ -741,6 +756,10 @@ static int gicv3_cpu_init(void)
>      if ( gicv3_enable_redist() )
>          return -ENODEV;
>  
> +    /* If the host has any ITSes, enable LPIs now. */
> +    if ( !list_empty(&host_its_list) )
> +        gicv3_enable_lpis();
> +
>      /* Set priority on PPI and SGI interrupts */
>      priority = (GIC_PRI_IPI << 24 | GIC_PRI_IPI << 16 | GIC_PRI_IPI << 8 |
>                  GIC_PRI_IPI);
> -- 
> 2.9.0
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.