[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-devel] [PATCH V1] xen/arm: domain_build: introduce dom0_lowmem bootargs
Hi,
On 15/09/2016 09:26, Edgar E. Iglesias wrote:
On Thu, Sep 15, 2016 at 08:20:33AM +0800, Peng Fan wrote:
Hi Edgar,
On Wed, Sep 14, 2016 at 04:16:58PM +0200, Edgar E. Iglesias wrote:
On Wed, Sep 14, 2016 at 08:40:09PM +0800, Peng Fan wrote:
On Wed, Sep 14, 2016 at 01:34:10PM +0100, Julien Grall wrote:
On 14/09/16 13:18, Peng Fan wrote:
Hello Julien,
On Wed, Sep 14, 2016 at 01:06:01PM +0100, Julien Grall wrote:
On 14/09/16 13:03, Peng Fan wrote:
Hello Julien,
Hello Peng,
On Wed, Sep 14, 2016 at 11:47:10AM +0100, Julien Grall wrote:
Hello,
On 14/09/16 08:41, Peng Fan wrote:
On Wed, Sep 14, 2016 at 08:23:24AM +0100, Julien Grall wrote:
diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 35ab08d..cc71e6f 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -28,6 +28,8 @@
static unsigned int __initdata opt_dom0_max_vcpus;
integer_param("dom0_max_vcpus", opt_dom0_max_vcpus);
+static bool_t __initdata opt_dom0_use_lowmem;
+boolean_param("dom0_use_lowmem", opt_dom0_use_lowmem);
int dom0_11_mapping = 1;
@@ -244,7 +246,7 @@ static void allocate_memory(struct domain *d, struct
kernel_info *kinfo)
unsigned int order = get_11_allocation_size(kinfo->unassigned_mem);
int i;
- bool_t lowmem = is_32bit_domain(d);
+ bool_t lowmem = is_32bit_domain(d) || opt_dom0_use_lowmem;
unsigned int bits;
Pass "dom0_use_lowmem=1" to xen to allocate lowmem as much as possible.
Again, what is the benefit to have a command line option for that?
Then you prefer directly change "bool_t lowmem = is_32bit_domain(d);" to "bool_t
lowmem = true" ?
I just want to give user a choice.
We don't add new command line parameter just because they look cool to have.
So far, you did not explain why it would be good to let the choice to the
user and how it could be used.
I have not try, if there is no lowmem.
I have not look into alloc_domheap_pages.
I am not sure whether there is such a platform or not,
just thinking if there is soc that dram memory starts from 4GB, and there is no
dram
below 4GB. If we still can get memory when lowmem is true, I am ok to change
directly assign
lowmem with value true. Anyway I have not look into the internals of domheap and
not sure whether there is such a platform that no lowmem (:-
We cannot exclude this possibility. However, the only reason that Xen is
requiring to allocate a bank below 4GB for 32-bit domain is to handle
non-LPAE kernel.
Now also need to handle device that have DMA limitation -:)
Hi Peng,
Doesn't your platform have an IOMMU/SMMU?
We have SMMU. This is not related to SMMU. Dom0 use 1:1 mapping and no SMMU
involved,
the physical memory assigned to Dom0 maybe higher than 4GB, but Some IPs only
supports 32bits DMA in Dom0. Then assign a 64bits dma address to a device only
supports 32
bits device in Linux will hang the device or else.
Well, I think it is somewhat related to the IOMMU.
If your SMMU supports S1 + S2 translations, allthough not supported
by Xen/ARM today, we could support nested SMMU's so that Dom0 could
get it's own private S1 portion of the SMMU.
Another option is to perhaps join into the efforts of PV-IOMMU
and try to see if it would work for Xen on ARM:
https://lists.xen.org/archives/html/xen-devel/2016-02/msg01428.html
For platforms that have an IOMMU, I think both of these options may
solve the use-case of dom0 using 32bit DMA devs without any lowmem.
In addition to that, these features would be very nice as they also
enable DMA API isolation and VFIO user-space drivers in dom0.
Spending time on these kind of options seems worthwhile to me.
There is a third option. The direct memory mapping for DOM0 is a
workaround for platform where not all DMA-capable devices are protected
by an SMMU.
If you know the platform does not have such devices, it would be
possible to remove the direct memory mapping.
In this case, Xen will allocate the RAM anywhere in the physical memory
but will be mapped in DOM0 using the memory region find the device tree.
(e.g if the first bank is below 4GB, DOM0 will have memory mapped below
4GB).
You would also have to remove specific xen_dma_ops (swiotlb-xen
callback) as the device will be fully protected (and no workaround is
necessary).
I suggested a generic way few years ago [1] that is a step towards
removing direct mapping. But i never had the time to continue it.
With 32bit DMA devs, without an IOMMU, lowmem becomes critical but
such systems are not really secure as has already been mentioned.
I'm not sure it's worth introducing workarounds/hax for such
systems.
Well, Dom0 (aka hardware domain) is a trusted domain as it owns most of
the devices. There are so many other way to screw up the platform. So it
would be fine to allocate lowmem for that domain.
The SMMU is only mandatory for any device passthrough to all the other
domain.
Regards,
[1] https://lists.xen.org/archives/html/xen-devel/2014-02/msg01897.html
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
