[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [ovmf baseline-only test] 67711: all pass



This run is configured for baseline tests only.

flight 67711 ovmf real [real]
http://osstest.xs.citrite.net/~osstest/testlogs/logs/67711/

Perfect :-)
All tests in this flight passed as required
version targeted for testing:
 ovmf                 18b00c8c8773e62b1e2c4a36f490996325570b67
baseline version:
 ovmf                 d947fbed72226011961e5e2691f09baebf128795

Last test of basis    67709  2016-09-14 05:54:11 Z    0 days
Testing same since    67711  2016-09-14 12:46:15 Z    0 days    1 attempts

------------------------------------------------------------
People who touched revisions under test:
  Jeff Fan <jeff.fan@xxxxxxxxx>
  lushifex <shifeix.a.lu@xxxxxxxxx>

jobs:
 build-amd64-xsm                                              pass    
 build-i386-xsm                                               pass    
 build-amd64                                                  pass    
 build-i386                                                   pass    
 build-amd64-libvirt                                          pass    
 build-i386-libvirt                                           pass    
 build-amd64-pvops                                            pass    
 build-i386-pvops                                             pass    
 test-amd64-amd64-xl-qemuu-ovmf-amd64                         pass    
 test-amd64-i386-xl-qemuu-ovmf-amd64                          pass    


------------------------------------------------------------
sg-report-flight on osstest.xs.citrite.net
logs: /home/osstest/logs
images: /home/osstest/images

Logs, config files, etc. are available at
    http://osstest.xs.citrite.net/~osstest/testlogs/logs

Test harness code can be found at
    http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary


Push not applicable.

------------------------------------------------------------
commit 18b00c8c8773e62b1e2c4a36f490996325570b67
Author: lushifex <shifeix.a.lu@xxxxxxxxx>
Date:   Thu Sep 1 13:02:55 2016 +0800

    Vlv2TbltDevicePkg:Signal End of Dxe Event.
    
    According to PI spec,DxeSmmReadyToLock protocol is published immediately 
after signaling of the End of Dxe Event.
    
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: lushifex <shifeix.a.lu@xxxxxxxxx>

commit 8a5b8cef678711060cc9014e0fac1886839de943
Author: Jeff Fan <jeff.fan@xxxxxxxxx>
Date:   Fri Sep 9 15:14:32 2016 +0800

    UefiCpuPkg/SecCore: Re-install SEC platform information(2) PPI
    
    In SecTemporaryRamDone(), we will build one privated GUIDed-HOB to save CPU 
BIST
    Data and re-install SEC platform information(2) PPI. Then other PEI drivers
    could get CPU BIST data from the private GUIDed-HOB by new installed PPI.
    
    Cc: Michael Kinney <michael.d.kinney@xxxxxxxxx>
    Cc: Feng Tian <feng.tian@xxxxxxxxx>
    Cc: Giri P Mudusuru <giri.p.mudusuru@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: Jeff Fan <jeff.fan@xxxxxxxxx>
    Reviewed-by: Feng Tian <feng.tian@xxxxxxxxx>

commit d157de8b5603fb24feed6ec7b46be8677083c25a
Author: Jeff Fan <jeff.fan@xxxxxxxxx>
Date:   Fri Sep 9 15:08:56 2016 +0800

    UefiCpuPkg/SecCore: Abstract worker function GetBistFromHob()
    
    Abstract one worker function to get CPU BIST from the GUIDed-HOB. Add
    SecPlatformInformationBist() and SecPlatformInformation2Bist() to invoke
    GetBistFromHob(). Add in/out for parameter in function header.
    
    Cc: Michael Kinney <michael.d.kinney@xxxxxxxxx>
    Cc: Feng Tian <feng.tian@xxxxxxxxx>
    Cc: Giri P Mudusuru <giri.p.mudusuru@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: Jeff Fan <jeff.fan@xxxxxxxxx>
    Reviewed-by: Feng Tian <feng.tian@xxxxxxxxx>

commit 863c738c4af0d200c8789e4786e1722e07f407fa
Author: Jeff Fan <jeff.fan@xxxxxxxxx>
Date:   Fri Sep 9 15:00:30 2016 +0800

    UefiCpuPkg/SecCore: Add SecBist.c
    
    Add SecBist.c and copy GetBistInfoFromPpi() and SecPlatformInformation2() 
from
    UefiCpuPkg/CpuMpPei/CpuBist.c. And update SecMain.c, SecMain.inf and
    UefiCpuPkg.dsc accordinlgy to pass build.
    
    Cc: Michael Kinney <michael.d.kinney@xxxxxxxxx>
    Cc: Feng Tian <feng.tian@xxxxxxxxx>
    Cc: Giri P Mudusuru <giri.p.mudusuru@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: Jeff Fan <jeff.fan@xxxxxxxxx>
    Reviewed-by: Feng Tian <feng.tian@xxxxxxxxx>

commit 8643299420ed5e8305eebda669c68672266096ff
Author: Jeff Fan <jeff.fan@xxxxxxxxx>
Date:   Fri Sep 9 14:36:39 2016 +0800

    UefiCpuPkg/CpuMpPei: Build GUIDed-HOB to store all CPU BIST Data
    
    Build gEfiSecPlatformInformation2PpiGuid GUIDed-HOB to store all CPU BIST 
data
    that could be used not only by SecPlatformInformation2(), but also by CPU 
MP Dxe
    driver to get CPU BIST data.
    
    Cc: Michael Kinney <michael.d.kinney@xxxxxxxxx>
    Cc: Feng Tian <feng.tian@xxxxxxxxx>
    Cc: Giri P Mudusuru <giri.p.mudusuru@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: Jeff Fan <jeff.fan@xxxxxxxxx>
    Reviewed-by: Feng Tian <feng.tian@xxxxxxxxx>

commit 8dc56ddeca490999ee0e256c4f2c42e7cb20a84d
Author: Jeff Fan <jeff.fan@xxxxxxxxx>
Date:   Fri Sep 9 14:17:57 2016 +0800

    UefiCpuPkg/CpuMpPei: Fix BistData ouput error
    
    ProcessorInfo.ProcessorId is UINT64 type even it's valid value is UINT32. 
Use %x
    only output the low 4 bytes and keep the high 4 bytes in stack that will be
    output as the second parameter BistData. Typecast ProcessorInfo.ProcessorId 
to
    UINT32 could make BistData output correctly.
    
    Cc: Michael Kinney <michael.d.kinney@xxxxxxxxx>
    Cc: Feng Tian <feng.tian@xxxxxxxxx>
    Cc: Giri P Mudusuru <giri.p.mudusuru@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: Jeff Fan <jeff.fan@xxxxxxxxx>
    Reviewed-by: Feng Tian <feng.tian@xxxxxxxxx>

commit dfb0e6591b31f894cc6abfc028ddcd1a161dbb48
Author: Jeff Fan <jeff.fan@xxxxxxxxx>
Date:   Fri Sep 9 14:08:33 2016 +0800

    UefiCpuPkg/CpuMpPei: Add parameter BistInformationSize
    
    Add one OPTIONAL parameter BistInformationSize for GetBistInfoFromPpi().
    
    Cc: Michael Kinney <michael.d.kinney@xxxxxxxxx>
    Cc: Feng Tian <feng.tian@xxxxxxxxx>
    Cc: Giri P Mudusuru <giri.p.mudusuru@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: Jeff Fan <jeff.fan@xxxxxxxxx>
    Reviewed-by: Feng Tian <feng.tian@xxxxxxxxx>

commit 7d17ab47d1d81c8012d8095c1e17412168c1cfc9
Author: Jeff Fan <jeff.fan@xxxxxxxxx>
Date:   Fri Sep 9 13:39:50 2016 +0800

    UefiCpuPkg/CpuDxe: Fix duplicated status code report
    
    If CPU Bist data is not zero, we will report Status code. But there is one 
bug
    that will report each processor's status code duplicated with NumberOfData
    times. This fix is to exchange the loop order on NumberOfData and
    mNumberOfProcessors. It could make sure the report status code only once for
    each processor.
    
    Cc: Michael Kinney <michael.d.kinney@xxxxxxxxx>
    Cc: Feng Tian <feng.tian@xxxxxxxxx>
    Cc: Giri P Mudusuru <giri.p.mudusuru@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.0
    Signed-off-by: Jeff Fan <jeff.fan@xxxxxxxxx>
    Reviewed-by: Feng Tian <feng.tian@xxxxxxxxx>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.