[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH 1/3] xen/arm: drivers: scif: Remove dead code



In scif_uart_init() uart->baud is set to BAUD_AUTO. So its a basic error
if this is different later. Detect this by an ASSERT, but remove the
dead code normally never reached.

Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
---
 xen/drivers/char/scif-uart.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/xen/drivers/char/scif-uart.c b/xen/drivers/char/scif-uart.c
index 51a2233..ca88c0f 100644
--- a/xen/drivers/char/scif-uart.c
+++ b/xen/drivers/char/scif-uart.c
@@ -143,23 +143,12 @@ static void __init scif_uart_init_preirq(struct 
serial_port *port)
     scif_writew(uart, SCIF_SCSMR, val);
 
     ASSERT( uart->clock_hz > 0 );
-    if ( uart->baud != BAUD_AUTO )
-    {
-        /* Setup desired Baud rate */
-        divisor = uart->clock_hz / (uart->baud << 4);
-        ASSERT( divisor >= 1 && divisor <= (uint16_t)UINT_MAX );
-        scif_writew(uart, SCIF_DL, (uint16_t)divisor);
-        /* Selects the frequency divided clock (SC_CLK external input) */
-        scif_writew(uart, SCIF_CKS, 0);
-        udelay(1000000 / uart->baud + 1);
-    }
-    else
-    {
-        /* Read current Baud rate */
-        divisor = scif_readw(uart, SCIF_DL);
-        ASSERT( divisor >= 1 && divisor <= (uint16_t)UINT_MAX );
-        uart->baud = uart->clock_hz / (divisor << 4);
-    }
+    ASSERT( uart->baud == BAUD_AUTO );
+
+    /* Read current Baud rate */
+    divisor = scif_readw(uart, SCIF_DL);
+    ASSERT( divisor >= 1 && divisor <= (uint16_t)UINT_MAX );
+    uart->baud = uart->clock_hz / (divisor << 4);
 
     /* Setup trigger level for TX/RX FIFOs */
     scif_writew(uart, SCIF_SCFCR, SCFCR_RTRG11 | SCFCR_TTRG11);
-- 
2.8.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.