[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v5 03/21] xen/x86: Generate deep dependencies of features



Some features depend on other features.  Working out and maintaining the exact
dependency tree is complicated, so it is expressed in the automatic generation
script.

At runtime, Xen needs to be disable all features which are dependent on a
feature being disabled.  Because of the flattening performed at compile time,
runtime can use a single mask to disable all eventual features.

Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
CC: Jan Beulich <JBeulich@xxxxxxxx>

v2:
 * New.
v3:
 * Vastly more reserch and comments.
v4:
 * Expand commit message.
 * More tweaks to the dependency tree.
 * Avoid for_each_set_bit() walking off the end of disabled_features[].
   Expanding disabled_features[] turns out to be far more simple than
   attempting to opencode for_each_set_bit()
v5:
 * Further tweaking of the SSE* dependencies.
---
 xen/arch/x86/cpuid.c        |  56 ++++++++++++++++
 xen/include/asm-x86/cpuid.h |   2 +
 xen/tools/gen-cpuid.py      | 153 +++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 210 insertions(+), 1 deletion(-)

diff --git a/xen/arch/x86/cpuid.c b/xen/arch/x86/cpuid.c
index 41439f8..e1e0e44 100644
--- a/xen/arch/x86/cpuid.c
+++ b/xen/arch/x86/cpuid.c
@@ -11,6 +11,7 @@ const uint32_t special_features[] = INIT_SPECIAL_FEATURES;
 static const uint32_t __initconst pv_featuremask[] = INIT_PV_FEATURES;
 static const uint32_t __initconst hvm_shadow_featuremask[] = 
INIT_HVM_SHADOW_FEATURES;
 static const uint32_t __initconst hvm_hap_featuremask[] = 
INIT_HVM_HAP_FEATURES;
+static const uint32_t __initconst deep_features[] = INIT_DEEP_FEATURES;
 
 uint32_t __read_mostly raw_featureset[FSCAPINTS];
 uint32_t __read_mostly pv_featureset[FSCAPINTS];
@@ -18,12 +19,36 @@ uint32_t __read_mostly hvm_featureset[FSCAPINTS];
 
 static void __init sanitise_featureset(uint32_t *fs)
 {
+    /* for_each_set_bit() uses unsigned longs.  Extend with zeroes. */
+    uint32_t disabled_features[
+        ROUNDUP(FSCAPINTS, sizeof(unsigned long)/sizeof(uint32_t))] = {};
     unsigned int i;
 
     for ( i = 0; i < FSCAPINTS; ++i )
     {
         /* Clamp to known mask. */
         fs[i] &= known_features[i];
+
+        /*
+         * Identify which features with deep dependencies have been
+         * disabled.
+         */
+        disabled_features[i] = ~fs[i] & deep_features[i];
+    }
+
+    for_each_set_bit(i, (void *)disabled_features,
+                     sizeof(disabled_features) * 8)
+    {
+        const uint32_t *dfs = lookup_deep_deps(i);
+        unsigned int j;
+
+        ASSERT(dfs); /* deep_features[] should guarentee this. */
+
+        for ( j = 0; j < FSCAPINTS; ++j )
+        {
+            fs[j] &= ~dfs[j];
+            disabled_features[j] &= ~dfs[j];
+        }
     }
 
     /*
@@ -164,6 +189,36 @@ void __init calculate_featuresets(void)
     calculate_hvm_featureset();
 }
 
+const uint32_t * __init lookup_deep_deps(uint32_t feature)
+{
+    static const struct {
+        uint32_t feature;
+        uint32_t fs[FSCAPINTS];
+    } deep_deps[] __initconst = INIT_DEEP_DEPS;
+    unsigned int start = 0, end = ARRAY_SIZE(deep_deps);
+
+    BUILD_BUG_ON(ARRAY_SIZE(deep_deps) != NR_DEEP_DEPS);
+
+    /* Fast early exit. */
+    if ( !test_bit(feature, deep_features) )
+        return NULL;
+
+    /* deep_deps[] is sorted.  Perform a binary search. */
+    while ( start < end )
+    {
+        unsigned int mid = start + ((end - start) / 2);
+
+        if ( deep_deps[mid].feature > feature )
+            end = mid;
+        else if ( deep_deps[mid].feature < feature )
+            start = mid + 1;
+        else
+            return deep_deps[mid].fs;
+    }
+
+    return NULL;
+}
+
 static void __init __maybe_unused build_assertions(void)
 {
     BUILD_BUG_ON(ARRAY_SIZE(known_features) != FSCAPINTS);
@@ -171,6 +226,7 @@ static void __init __maybe_unused build_assertions(void)
     BUILD_BUG_ON(ARRAY_SIZE(pv_featuremask) != FSCAPINTS);
     BUILD_BUG_ON(ARRAY_SIZE(hvm_shadow_featuremask) != FSCAPINTS);
     BUILD_BUG_ON(ARRAY_SIZE(hvm_hap_featuremask) != FSCAPINTS);
+    BUILD_BUG_ON(ARRAY_SIZE(deep_features) != FSCAPINTS);
 }
 
 /*
diff --git a/xen/include/asm-x86/cpuid.h b/xen/include/asm-x86/cpuid.h
index 5041bcd..4725672 100644
--- a/xen/include/asm-x86/cpuid.h
+++ b/xen/include/asm-x86/cpuid.h
@@ -29,6 +29,8 @@ extern uint32_t hvm_featureset[FSCAPINTS];
 
 void calculate_featuresets(void);
 
+const uint32_t *lookup_deep_deps(uint32_t feature);
+
 #endif /* __ASSEMBLY__ */
 #endif /* !__X86_CPUID_H__ */
 
diff --git a/xen/tools/gen-cpuid.py b/xen/tools/gen-cpuid.py
index f971ab2..57533de 100755
--- a/xen/tools/gen-cpuid.py
+++ b/xen/tools/gen-cpuid.py
@@ -144,6 +144,141 @@ def crunch_numbers(state):
     state.hvm_shadow = featureset_to_uint32s(state.raw_hvm_shadow, nr_entries)
     state.hvm_hap = featureset_to_uint32s(state.raw_hvm_hap, nr_entries)
 
+    #
+    # Feature dependency information.
+    #
+    # !!! WARNING !!!
+    #
+    # A lot of this information is derived from the written text of vendors
+    # software manuals, rather than directly from a statement.  As such, it
+    # does contain guesswork and assumptions, and may not accurately match
+    # hardware implementations.
+    #
+    # It is however designed to create an end result for a guest which does
+    # plausibly match real hardware.
+    #
+    # !!! WARNING !!!
+    #
+    # The format of this dictionary is that the feature in the key is a direct
+    # prerequisite of each feature in the value.
+    #
+    # The first consideration is about which functionality is physically built
+    # on top of other features.  The second consideration, which is more
+    # subjective, is whether real hardware would ever be found supporting
+    # feature X but not Y.
+    #
+    deps = {
+        # FPU is taken to mean support for the x87 regisers as well as the
+        # instructions.  MMX is documented to alias the %MM registers over the
+        # x87 %ST registers in hardware.
+        FPU: [MMX],
+
+        # The PSE36 feature indicates that reserved bits in a PSE superpage
+        # may be used as extra physical address bits.
+        PSE: [PSE36],
+
+        # Entering Long Mode requires that %CR4.PAE is set.  The NX and PKU
+        # pagetable bits are only representable in the 64bit PTE format
+        # offered by PAE.
+        PAE: [LM, NX, PKU],
+
+        # APIC is special, but X2APIC does depend on APIC being available in
+        # the first place.
+        APIC: [X2APIC],
+
+        # AMD built MMXExtentions and 3DNow as extentions to MMX.
+        MMX: [MMXEXT, _3DNOW],
+
+        # The FXSAVE/FXRSTOR instructions were introduced into hardware before
+        # SSE, which is why they behave differently based on %CR4.OSFXSAVE and
+        # have their own feature bit.  AMD however introduce the Fast FXSR
+        # feature as an optimisation.
+        FXSR: [FFXSR, SSE],
+
+        # SSE is taken to mean support for the %XMM registers as well as the
+        # instructions.  Several futher instruction sets are built on core
+        # %XMM support, without specific inter-dependencies.
+        SSE: [SSE2, SSE3, SSSE3, SSE4A,
+              AESNI, SHA],
+
+        # SSE2 was re-specified as core instructions for 64bit.
+        SSE2: [LM],
+
+        # SSE4.1 explicitly depends on SSE3 and SSSE3
+        SSE3: [SSE4_1],
+        SSSE3: [SSE4_1],
+
+        # SSE4.2 explicitly depends on SSE4.1
+        SSE4_1: [SSE4_2],
+
+        # AMD specify no relationship between POPCNT and SSE4.2.  Intel
+        # document that SSE4.2 should be checked for before checking for
+        # POPCNT.  However, it has its own feature bit, and operates on GPRs
+        # rather than %XMM state, so doesn't inherently depend on SSE.
+        # Therefore, we do not specify a dependency between SSE4_2 and POPCNT.
+        #
+        # SSE4_2: [POPCNT]
+
+        # The INVPCID instruction depends on PCID infrastructure being
+        # available.
+        PCID: [INVPCID],
+
+        # XSAVE is an extra set of instructions for state management, but
+        # doesn't constitue new state itself.  Some of the dependent features
+        # are instructions built on top of base XSAVE, while others are new
+        # instruction groups which are specified to require XSAVE for state
+        # management.
+        XSAVE: [XSAVEOPT, XSAVEC, XGETBV1, XSAVES,
+                AVX, MPX, PKU, LWP],
+
+        # AVX is taken to mean hardware support for VEX encoded instructions,
+        # 256bit registers, and the instructions themselves.  Each of these
+        # subsequent instruction groups may only be VEX encoded.
+        AVX: [FMA, FMA4, F16C, AVX2, XOP],
+
+        # CX16 is only encodable in Long Mode.  LAHF_LM indicates that the
+        # SAHF/LAHF instructions are reintroduced in Long Mode.  1GB
+        # superpages and PCID are only available in 4 level paging.
+        LM: [CX16, PCID, LAHF_LM, PAGE1GB],
+
+        # AMD K6-2+ and K6-III processors shipped with 3DNow+, beyond the
+        # standard 3DNow in the earlier K6 processors.
+        _3DNOW: [_3DNOWEXT],
+    }
+
+    deep_features = tuple(sorted(deps.keys()))
+    state.deep_deps = {}
+
+    for feat in deep_features:
+
+        seen = [feat]
+        to_process = list(deps[feat])
+
+        while len(to_process):
+
+            # To debug, uncomment the following lines:
+            # def repl(l):
+            #     return "[" + ", ".join((state.names[x] for x in l)) + "]"
+            # print >>sys.stderr, "Feature %s, seen %s, to_process %s " % \
+            #     (state.names[feat], repl(seen), repl(to_process))
+
+            f = to_process.pop(0)
+
+            if f in seen:
+                raise Fail("ERROR: Cycle found with %s when processing %s"
+                           % (state.names[f], state.names[feat]))
+
+            seen.append(f)
+            to_process = list(set(to_process + deps.get(f, [])))
+
+        state.deep_deps[feat] = seen[1:]
+
+    state.deep_features = featureset_to_uint32s(deps.keys(), nr_entries)
+    state.nr_deep_deps = len(state.deep_deps.keys())
+
+    for k, v in state.deep_deps.iteritems():
+        state.deep_deps[k] = featureset_to_uint32s(v, nr_entries)
+
 
 def write_results(state):
     state.output.write(
@@ -170,6 +305,12 @@ def write_results(state):
 #define INIT_HVM_SHADOW_FEATURES { \\\n%s\n}
 
 #define INIT_HVM_HAP_FEATURES { \\\n%s\n}
+
+#define NR_DEEP_DEPS %sU
+
+#define INIT_DEEP_FEATURES { \\\n%s\n}
+
+#define INIT_DEEP_DEPS { \\
 """ % (state.nr_entries,
        state.common_1d,
        format_uint32s(state.known, 4),
@@ -177,10 +318,20 @@ def write_results(state):
        format_uint32s(state.pv, 4),
        format_uint32s(state.hvm_shadow, 4),
        format_uint32s(state.hvm_hap, 4),
+       state.nr_deep_deps,
+       format_uint32s(state.deep_features, 4),
        ))
 
+    for dep in sorted(state.deep_deps.keys()):
+        state.output.write(
+            "    { %#xU, /* %s */ { \\\n%s\n    }, }, \\\n"
+            % (dep, state.names[dep],
+               format_uint32s(state.deep_deps[dep], 8)
+           ))
+
     state.output.write(
-"""
+"""}
+
 #endif /* __XEN_X86__FEATURESET_DATA__ */
 """)
 
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.