[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v3 1/7] x86/mm/pat: Add support of non-default PAT MSR setting



In preparation for fixing a regression caused by 'commit 9cd25aac1f44
("x86/mm/pat: Emulate PAT when it is disabled")', PAT needs to
support a case that PAT MSR is initialized with a non-default
value.

When pat_init() is called and PAT is disabled, it initializes
PAT table with the BIOS default value. Xen, however, sets PAT MSR
with a non-default value to enable WC. This causes inconsistency
between PAT table and PAT MSR when PAT is set to disable on Xen.

Change pat_init() to handle the PAT disable cases properly.  Add
init_cache_modes() to handle two cases when PAT is set to disable.
 1. CPU supports PAT: Set PAT table to be consistent with PAT MSR.
 2. CPU does not support PAT: Set PAT table to be consistent with
    PWT and PCD bits in a PTE.

Note, __init_cache_modes(), renamed from pat_init_cache_modes(),
will be changed to a static function in a later patch.

Signed-off-by: Toshi Kani <toshi.kani@xxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxx>
Cc: Luis R. Rodriguez <mcgrof@xxxxxxxx>
Cc: Juergen Gross <jgross@xxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
 arch/x86/include/asm/pat.h |    2 +
 arch/x86/mm/pat.c          |   73 ++++++++++++++++++++++++++++++++------------
 arch/x86/xen/enlighten.c   |    2 +
 3 files changed, 55 insertions(+), 22 deletions(-)

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index ca6c228..97ea55b 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -6,7 +6,7 @@
 
 bool pat_enabled(void);
 extern void pat_init(void);
-void pat_init_cache_modes(u64);
+void __init_cache_modes(u64);
 
 extern int reserve_memtype(u64 start, u64 end,
                enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 04e2e71..1da55a5 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -181,7 +181,7 @@ static enum page_cache_mode pat_get_cache_mode(unsigned 
pat_val, char *msg)
  * configuration.
  * Using lower indices is preferred, so we start with highest index.
  */
-void pat_init_cache_modes(u64 pat)
+void __init_cache_modes(u64 pat)
 {
        enum page_cache_mode cache;
        char pat_msg[33];
@@ -207,9 +207,6 @@ static void pat_bsp_init(u64 pat)
                return;
        }
 
-       if (!pat_enabled())
-               goto done;
-
        rdmsrl(MSR_IA32_CR_PAT, tmp_pat);
        if (!tmp_pat) {
                pat_disable("PAT MSR is 0, disabled.");
@@ -218,15 +215,11 @@ static void pat_bsp_init(u64 pat)
 
        wrmsrl(MSR_IA32_CR_PAT, pat);
 
-done:
-       pat_init_cache_modes(pat);
+       __init_cache_modes(pat);
 }
 
 static void pat_ap_init(u64 pat)
 {
-       if (!pat_enabled())
-               return;
-
        if (!cpu_has_pat) {
                /*
                 * If this happens we are on a secondary CPU, but switched to
@@ -238,18 +231,32 @@ static void pat_ap_init(u64 pat)
        wrmsrl(MSR_IA32_CR_PAT, pat);
 }
 
-void pat_init(void)
+static void init_cache_modes(void)
 {
-       u64 pat;
-       struct cpuinfo_x86 *c = &boot_cpu_data;
+       u64 pat = 0;
+       static int init_cm_done;
 
-       if (!pat_enabled()) {
+       if (init_cm_done)
+               return;
+
+       if (boot_cpu_has(X86_FEATURE_PAT)) {
+               /*
+                * CPU supports PAT. Set PAT table to be consistent with
+                * PAT MSR. This case supports "nopat" boot option, and
+                * virtual machine environments which support PAT without
+                * MTRRs. In specific, Xen has unique setup to PAT MSR.
+                *
+                * If PAT MSR returns 0, it is considered invalid and emulates
+                * as No PAT.
+                */
+               rdmsrl(MSR_IA32_CR_PAT, pat);
+       }
+
+       if (!pat) {
                /*
                 * No PAT. Emulate the PAT table that corresponds to the two
-                * cache bits, PWT (Write Through) and PCD (Cache Disable). This
-                * setup is the same as the BIOS default setup when the system
-                * has PAT but the "nopat" boot option has been specified. This
-                * emulated PAT table is used when MSR_IA32_CR_PAT returns 0.
+                * cache bits, PWT (Write Through) and PCD (Cache Disable).
+                * This setup is also the same as the BIOS default setup.
                 *
                 * PTE encoding:
                 *
@@ -266,10 +273,36 @@ void pat_init(void)
                 */
                pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
                      PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
+       }
+
+       __init_cache_modes(pat);
+
+       init_cm_done = 1;
+}
+
+/**
+ * pat_init - Initialize PAT MSR and PAT table
+ *
+ * This function initializes PAT MSR and PAT table with an OS-defined value
+ * to enable additional cache attributes, WC and WT.
+ *
+ * This function must be called on all CPUs using the specific sequence of
+ * operations defined in Intel SDM. mtrr_rendezvous_handler() provides this
+ * procedure for PAT.
+ */
+void pat_init(void)
+{
+       u64 pat;
+       struct cpuinfo_x86 *c = &boot_cpu_data;
+
+       if (!pat_enabled()) {
+               init_cache_modes();
+               return;
+       }
 
-       } else if ((c->x86_vendor == X86_VENDOR_INTEL) &&
-                  (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
-                   ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
+       if ((c->x86_vendor == X86_VENDOR_INTEL) &&
+           (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
+            ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
                /*
                 * PAT support with the lower four entries. Intel Pentium 2,
                 * 3, M, and 4 are affected by PAT errata, which makes the
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 2379a5a..f4296b6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1623,7 +1623,7 @@ asmlinkage __visible void __init xen_start_kernel(void)
         * configuration.
         */
        rdmsrl(MSR_IA32_CR_PAT, pat);
-       pat_init_cache_modes(pat);
+       __init_cache_modes(pat);
 
        /* keep using Xen gdt for now; no urgent need to change it */
 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.