[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v5 16/22] arm/acpi: Configure SPI interrupt type and route to Dom0 dynamically



On Fri, 4 Mar 2016, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@xxxxxxxxxx>
> 
> Interrupt information is described in DSDT and is not available at the
> time of booting. Check if the interrupt is permitted to access and set
> the interrupt type, route it to guest dynamically only for SPI
> and Dom0.
> 
> Signed-off-by: Parth Dixit <parth.dixit@xxxxxxxxxx>
> Signed-off-by: Shannon Zhao <shannon.zhao@xxxxxxxxxx>
> ---
> v5: add a small function to get the irq type from ICFG
> ---
>  xen/arch/arm/vgic.c | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/xen/arch/arm/vgic.c b/xen/arch/arm/vgic.c
> index ee35683..52378a3 100644
> --- a/xen/arch/arm/vgic.c
> +++ b/xen/arch/arm/vgic.c
> @@ -25,6 +25,8 @@
>  #include <xen/irq.h>
>  #include <xen/sched.h>
>  #include <xen/perfc.h>
> +#include <xen/iocap.h>
> +#include <xen/acpi.h>
>  
>  #include <asm/current.h>
>  
> @@ -334,6 +336,21 @@ void vgic_disable_irqs(struct vcpu *v, uint32_t r, int n)
>      }
>  }
>  
> +#ifdef CONFIG_ACPI
> +#define VGIC_ICFG_MASK(intr) ( 1 << ( ( 2 * ( intr % 16 ) ) + 1 ) )

                  remove spaces: ^      ^                   ^       ^

> +static unsigned int get_the_irq_type(struct vcpu *v, int n, int index)

static inline


> +{
> +    struct vgic_irq_rank *vr = vgic_get_rank(v, n);
> +    uint32_t tr = vr->icfg[index >> 4];
> +
> +    if ( tr & VGIC_ICFG_MASK(index) )
> +        return IRQ_TYPE_EDGE_BOTH;
> +    else
> +        return IRQ_TYPE_LEVEL_MASK;
> +}
> +#endif
> +
>  void vgic_enable_irqs(struct vcpu *v, uint32_t r, int n)
>  {
>      const unsigned long mask = r;
> @@ -342,9 +359,30 @@ void vgic_enable_irqs(struct vcpu *v, uint32_t r, int n)
>      unsigned long flags;
>      int i = 0;
>      struct vcpu *v_target;
> +#ifdef CONFIG_ACPI
> +    struct domain *d = v->domain;
> +    int ret;
> +#endif
>  
>      while ( (i = find_next_bit(&mask, 32, i)) < 32 ) {
>          irq = i + (32 * n);
> +#ifdef CONFIG_ACPI
> +        /* Set the irq type and route it to guest only for SPI and Dom0 */
> +        if( irq_access_permitted(d, irq) && is_hardware_domain(d) &&
> +            ( irq >= 32 ) && ( !acpi_disabled ) )

Is there a reason why we need to have this code inside an ifdef? It
looks like we can remove all ifdefs from this patch.


> +        {
> +            ret = irq_set_spi_type(irq, get_the_irq_type(v, n, i));
> +            if ( ret )
> +                printk(XENLOG_WARNING "The irq type is not correct\n");
> +
> +            vgic_reserve_virq(d, irq);
> +
> +            ret = route_irq_to_guest(d, irq, irq, NULL);
> +            if ( ret )
> +                printk(XENLOG_ERR "Unable to route IRQ %u to domain %u\n",
> +                       irq, d->domain_id);
> +        }
> +#endif
>          v_target = __vgic_get_target_vcpu(v, irq);
>          p = irq_to_pending(v_target, irq);
>          set_bit(GIC_IRQ_GUEST_ENABLED, &p->status);
> -- 
> 2.0.4
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.