[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH 3/4] xenconfig: support xl<->xml conversion of rbd disk devices



The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. xl disk config
containing

  disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
            target=rbd:pool/image:auth_supported=none:\
            mon_host=mon1.example.org\:6321\;mon2.example.org\:6322\;\
            mon3.example.org\:6322" ]

can be converted to the following XML (and vice versa)

   <disk type='network' device='disk'>
     <driver name='qemu' type='raw'/>
     <source protocol='rbd' name='pool/image'>
       <host name='mon1.example.org' port='6321'/>
       <host name='mon2.example.org' port='6322'/>
       <host name='mon3.example.org' port='6322'/>
     </source>
     <target dev='hdb' bus='ide'/>
     <address type='drive' controller='0' bus='0' target='0' unit='1'/>
   </disk>

Note that conversion of <auth> config is not handled in this patch,
but can be done in a follow-up patch.

Also add a test for the conversions.

Signed-off-by: Jim Fehlig <jfehlig@xxxxxxxx>
---
 src/xenconfig/xen_xl.c                           | 145 +++++++++++++++++++++--
 tests/xlconfigdata/test-rbd-multihost-noauth.cfg |  26 ++++
 tests/xlconfigdata/test-rbd-multihost-noauth.xml |  51 ++++++++
 tests/xlconfigtest.c                             |   1 +
 4 files changed, 216 insertions(+), 7 deletions(-)

diff --git a/src/xenconfig/xen_xl.c b/src/xenconfig/xen_xl.c
index f3e8b55..fadfe71 100644
--- a/src/xenconfig/xen_xl.c
+++ b/src/xenconfig/xen_xl.c
@@ -246,6 +246,24 @@ xenParseXLSpice(virConfPtr conf, virDomainDefPtr def)
     return -1;
 }
 
+
+static int
+xenParseXLDiskSrc(virDomainDiskDefPtr disk, char *srcstr)
+{
+    if (STRPREFIX(srcstr, "rbd:")) {
+        virDomainDiskSetType(disk, VIR_STORAGE_TYPE_NETWORK);
+        disk->src->protocol = VIR_STORAGE_NET_PROTOCOL_RBD;
+        return virStorageSourceParseRBDColonString(srcstr + strlen("rbd:"),
+                                                   disk->src);
+    } else {
+        if (virDomainDiskSetSource(disk, srcstr) < 0)
+            return -1;
+    }
+
+    return 0;
+}
+
+
 /*
  * For details on xl disk config syntax, see
  * docs/misc/xl-disk-configuration.txt in the Xen sources.  The important
@@ -311,12 +329,12 @@ xenParseXLDisk(virConfPtr conf, virDomainDefPtr def)
             if (!(disk = virDomainDiskDefNew(NULL)))
                 goto fail;
 
+            if (xenParseXLDiskSrc(disk, libxldisk->pdev_path) < 0)
+                goto fail;
+
             if (VIR_STRDUP(disk->dst, libxldisk->vdev) < 0)
                 goto fail;
 
-            if (virDomainDiskSetSource(disk, libxldisk->pdev_path) < 0)
-                goto fail;
-
             disk->src->readonly = !libxldisk->readwrite;
             disk->removable = libxldisk->removable;
 
@@ -358,7 +376,8 @@ xenParseXLDisk(virConfPtr conf, virDomainDefPtr def)
                 case LIBXL_DISK_BACKEND_UNKNOWN:
                     if (virDomainDiskSetDriver(disk, "qemu") < 0)
                         goto fail;
-                    virDomainDiskSetType(disk, VIR_STORAGE_TYPE_FILE);
+                    if (virDomainDiskGetType(disk) == VIR_STORAGE_TYPE_NONE)
+                        virDomainDiskSetType(disk, VIR_STORAGE_TYPE_FILE);
                     break;
 
                 case LIBXL_DISK_BACKEND_TAP:
@@ -578,14 +597,115 @@ xenFormatXLOS(virConfPtr conf, virDomainDefPtr def)
 }
 
 
+static char *
+xenFormatXLDiskSrcNet(virStorageSourcePtr src)
+{
+    char *ret = NULL;
+    virBuffer buf = VIR_BUFFER_INITIALIZER;
+    size_t i;
+
+    switch ((virStorageNetProtocol) src->protocol) {
+    case VIR_STORAGE_NET_PROTOCOL_NBD:
+    case VIR_STORAGE_NET_PROTOCOL_HTTP:
+    case VIR_STORAGE_NET_PROTOCOL_HTTPS:
+    case VIR_STORAGE_NET_PROTOCOL_FTP:
+    case VIR_STORAGE_NET_PROTOCOL_FTPS:
+    case VIR_STORAGE_NET_PROTOCOL_TFTP:
+    case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+    case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+    case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+    case VIR_STORAGE_NET_PROTOCOL_LAST:
+    case VIR_STORAGE_NET_PROTOCOL_NONE:
+        virReportError(VIR_ERR_NO_SUPPORT,
+                       _("Unsupported network block protocol '%s'"),
+                       virStorageNetProtocolTypeToString(src->protocol));
+        goto cleanup;
+
+    case VIR_STORAGE_NET_PROTOCOL_RBD:
+        if (strchr(src->path, ':')) {
+            virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+                           _("':' not allowed in RBD source volume name '%s'"),
+                           src->path);
+            goto cleanup;
+        }
+
+        virBufferStrcat(&buf, "rbd:", src->path, NULL);
+
+        virBufferAddLit(&buf, ":auth_supported=none");
+
+        if (src->nhosts > 0) {
+            virBufferAddLit(&buf, ":mon_host=");
+            for (i = 0; i < src->nhosts; i++) {
+                if (i)
+                    virBufferAddLit(&buf, "\\;");
+
+                /* assume host containing : is ipv6 */
+                if (strchr(src->hosts[i].name, ':'))
+                    virBufferEscape(&buf, '\\', ":", "[%s]",
+                                    src->hosts[i].name);
+                else
+                    virBufferAsprintf(&buf, "%s", src->hosts[i].name);
+
+                if (src->hosts[i].port)
+                    virBufferAsprintf(&buf, "\\:%s", src->hosts[i].port);
+            }
+        }
+
+        if (virBufferCheckError(&buf) < 0)
+            goto cleanup;
+
+        ret = virBufferContentAndReset(&buf);
+        break;
+    }
+
+ cleanup:
+    virBufferFreeAndReset(&buf);
+
+    return ret;
+}
+
+
+static int
+xenFormatXLDiskSrc(virStorageSourcePtr src, char **srcstr)
+{
+    int actualType = virStorageSourceGetActualType(src);
+
+    *srcstr = NULL;
+
+    if (virStorageSourceIsEmpty(src))
+        return 0;
+
+    switch ((virStorageType) actualType) {
+    case VIR_STORAGE_TYPE_BLOCK:
+    case VIR_STORAGE_TYPE_FILE:
+    case VIR_STORAGE_TYPE_DIR:
+        if (VIR_STRDUP(*srcstr, src->path) < 0)
+            return -1;
+        break;
+
+    case VIR_STORAGE_TYPE_NETWORK:
+        if (!(*srcstr = xenFormatXLDiskSrcNet(src)))
+            return -1;
+        break;
+
+    case VIR_STORAGE_TYPE_VOLUME:
+    case VIR_STORAGE_TYPE_NONE:
+    case VIR_STORAGE_TYPE_LAST:
+        break;
+    }
+
+    return 0;
+}
+
+
 static int
 xenFormatXLDisk(virConfValuePtr list, virDomainDiskDefPtr disk)
 {
     virBuffer buf = VIR_BUFFER_INITIALIZER;
     virConfValuePtr val, tmp;
-    const char *src = virDomainDiskGetSource(disk);
     int format = virDomainDiskGetFormat(disk);
     const char *driver = virDomainDiskGetDriver(disk);
+    char *target = NULL;
 
     /* format */
     virBufferAddLit(&buf, "format=");
@@ -637,8 +757,18 @@ xenFormatXLDisk(virConfValuePtr list, virDomainDiskDefPtr 
disk)
     if (disk->device == VIR_DOMAIN_DISK_DEVICE_CDROM)
         virBufferAddLit(&buf, "devtype=cdrom,");
 
-    /* target */
-    virBufferAsprintf(&buf, "target=%s", src);
+    /*
+     * target
+     * From $xensrc/docs/misc/xl-disk-configuration.txt:
+     * When this parameter is specified by name, ie with the "target="
+     * syntax in the configuration file, it consumes the whole rest of the
+     * <diskspec> including trailing whitespaces.  Therefore in that case
+     * it must come last.
+     */
+    if (xenFormatXLDiskSrc(disk->src, &target) < 0)
+        goto cleanup;
+
+    virBufferAsprintf(&buf, "target=%s", target);
 
     if (virBufferCheckError(&buf) < 0)
         goto cleanup;
@@ -658,6 +788,7 @@ xenFormatXLDisk(virConfValuePtr list, virDomainDiskDefPtr 
disk)
     return 0;
 
  cleanup:
+    VIR_FREE(target);
     virBufferFreeAndReset(&buf);
     return -1;
 }
diff --git a/tests/xlconfigdata/test-rbd-multihost-noauth.cfg 
b/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
new file mode 100644
index 0000000..e233e14
--- /dev/null
+++ b/tests/xlconfigdata/test-rbd-multihost-noauth.cfg
@@ -0,0 +1,26 @@
+name = "XenGuest2"
+uuid = "c7a5fdb2-cdaf-9455-926a-d65c16db1809"
+maxmem = 579
+memory = 394
+vcpus = 1
+pae = 1
+acpi = 1
+apic = 1
+hap = 0
+viridian = 0
+rtc_timeoffset = 0
+localtime = 0
+on_poweroff = "destroy"
+on_reboot = "restart"
+on_crash = "restart"
+device_model = "/usr/lib/xen/bin/qemu-dm"
+sdl = 0
+vnc = 1
+vncunused = 1
+vnclisten = "127.0.0.1"
+vif = [ "mac=00:16:3e:66:92:9c,bridge=xenbr1,script=vif-bridge,model=e1000" ]
+parallel = "none"
+serial = "none"
+builder = "hvm"
+boot = "d"
+disk = [ 
"format=raw,vdev=hda,access=rw,backendtype=phy,target=/dev/HostVG/XenGuest2", 
"format=raw,vdev=hdb,access=rw,backendtype=qdisk,target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\:6321\;mon2.example.org\:6322\;mon3.example.org\:6322"
 ]
diff --git a/tests/xlconfigdata/test-rbd-multihost-noauth.xml 
b/tests/xlconfigdata/test-rbd-multihost-noauth.xml
new file mode 100644
index 0000000..720265e
--- /dev/null
+++ b/tests/xlconfigdata/test-rbd-multihost-noauth.xml
@@ -0,0 +1,51 @@
+<domain type='xen'>
+  <name>XenGuest2</name>
+  <uuid>c7a5fdb2-cdaf-9455-926a-d65c16db1809</uuid>
+  <memory unit='KiB'>592896</memory>
+  <currentMemory unit='KiB'>403456</currentMemory>
+  <vcpu placement='static'>1</vcpu>
+  <os>
+    <type arch='x86_64' machine='xenfv'>hvm</type>
+    <loader type='rom'>/usr/lib/xen/boot/hvmloader</loader>
+    <boot dev='cdrom'/>
+  </os>
+  <features>
+    <acpi/>
+    <apic/>
+    <pae/>
+  </features>
+  <clock offset='variable' adjustment='0' basis='utc'/>
+  <on_poweroff>destroy</on_poweroff>
+  <on_reboot>restart</on_reboot>
+  <on_crash>restart</on_crash>
+  <devices>
+    <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
+    <disk type='block' device='disk'>
+      <driver name='phy' type='raw'/>
+      <source dev='/dev/HostVG/XenGuest2'/>
+      <target dev='hda' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
+    </disk>
+    <disk type='network' device='disk'>
+      <driver name='qemu' type='raw'/>
+      <source protocol='rbd' name='pool/image'>
+        <host name='mon1.example.org' port='6321'/>
+        <host name='mon2.example.org' port='6322'/>
+        <host name='mon3.example.org' port='6322'/>
+      </source>
+      <target dev='hdb' bus='ide'/>
+      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
+    </disk>
+    <interface type='bridge'>
+      <mac address='00:16:3e:66:92:9c'/>
+      <source bridge='xenbr1'/>
+      <script path='vif-bridge'/>
+      <model type='e1000'/>
+    </interface>
+    <input type='mouse' bus='ps2'/>
+    <input type='keyboard' bus='ps2'/>
+    <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
+      <listen type='address' address='127.0.0.1'/>
+    </graphics>
+  </devices>
+</domain>
diff --git a/tests/xlconfigtest.c b/tests/xlconfigtest.c
index 13b99f2..2668a76 100644
--- a/tests/xlconfigtest.c
+++ b/tests/xlconfigtest.c
@@ -217,6 +217,7 @@ mymain(void)
     DO_TEST("paravirt-cmdline");
     DO_TEST_FORMAT("paravirt-cmdline-extra-root");
     DO_TEST_FORMAT("paravirt-cmdline-bogus-extra-root");
+    DO_TEST("rbd-multihost-noauth");
 
 #ifdef LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST
     DO_TEST("fullvirt-multiusb");
-- 
2.6.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.