[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Linux version 4.1.7-hardened-r1 (root@vm-host) (gcc version 4.9.3 (Gentoo Hardened 4.9.3 p1.2, pie-0.6.3) ) #1 SMP Wed Nov 11 11:47:43 CET 2015 [ 0.000000] Command line: placeholder root=UUID=aeaa7943-af67-42eb-b6f9-e73ebf7296de ro rootflags=subvol=rootfs console=hvc0 earlyprintk=xen i915.modeset=1 xen-pciback.hide=(00:1b.0)(00:1d.0)(01:00.0)(02:00.0)(03:00.0)(04:00.0)(05:00.0)(06:00.0)(08:00.0)(0a:08.0)(0a:09.0)(0a:0a.0)(0a:0b.0) softlevel=xen.d [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] Xen: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] Xen: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] Xen: [mem 0x0000000040200000-0x00000000db9effff] usable [ 0.000000] Xen: [mem 0x00000000db9f0000-0x00000000dc0d9fff] reserved [ 0.000000] Xen: [mem 0x00000000dc0da000-0x00000000dc1f8fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dc1f9000-0x00000000dc650fff] reserved [ 0.000000] Xen: [mem 0x00000000dc651000-0x00000000dc651fff] usable [ 0.000000] Xen: [mem 0x00000000dc652000-0x00000000dc694fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dc695000-0x00000000dcdb9fff] usable [ 0.000000] Xen: [mem 0x00000000dcdba000-0x00000000dcff1fff] reserved [ 0.000000] Xen: [mem 0x00000000dcff2000-0x00000000dcffffff] usable [ 0.000000] Xen: [mem 0x00000000dd800000-0x00000000df9fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000012433efff] usable [ 0.000000] Xen: [mem 0x000000012433f000-0x000000081e5fffff] unusable [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: iEi B199/B199, BIOS V38IAR10 07/16/2014 [ 0.000000] Hypervisor detected: Xen [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x12433f max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdca00000-0xdcbfffff] [ 0.000000] [mem 0xdca00000-0xdcbfffff] page 4k [ 0.000000] BRK [0x01a81000, 0x01a81fff] PGTABLE [ 0.000000] BRK [0x01a82000, 0x01a82fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xc0000000-0xdb9effff] [ 0.000000] [mem 0xc0000000-0xdb9effff] page 4k [ 0.000000] BRK [0x01a83000, 0x01a83fff] PGTABLE [ 0.000000] BRK [0x01a84000, 0x01a84fff] PGTABLE [ 0.000000] BRK [0x01a85000, 0x01a85fff] PGTABLE [ 0.000000] BRK [0x01a86000, 0x01a86fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdc651000-0xdc651fff] [ 0.000000] [mem 0xdc651000-0xdc651fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdc695000-0xdc9fffff] [ 0.000000] [mem 0xdc695000-0xdc9fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa0000000-0xbfffffff] [ 0.000000] [mem 0xa0000000-0xbfffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x1fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x40200000-0x9fffffff] [ 0.000000] [mem 0x40200000-0x9fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdcc00000-0xdcdb9fff] [ 0.000000] [mem 0xdcc00000-0xdcdb9fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xdcff2000-0xdcffffff] [ 0.000000] [mem 0xdcff2000-0xdcffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12433efff] [ 0.000000] [mem 0x100000000-0x12433efff] page 4k [ 0.000000] RAMDISK: [mem 0x04000000-0x048fdfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DC1E9078 000074 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DC1F3710 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DC1E9188 00A587 (v02 ALASKA A M I 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DC1F7F80 000040 [ 0.000000] ACPI: APIC 0x00000000DC1F3808 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DC1F38A0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DC1F38E8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DC1F3928 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DC1F3960 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DC1F3CD0 00081E (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DC1F44F0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: XMAR 0x00000000DC1F4F88 0000B0 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: ASF! 0x00000000DC1F5038 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012433efff] [ 0.000000] NODE_DATA(0) allocated [mem 0xdcca2000-0xdcca3fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000012433efff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000db9effff] [ 0.000000] node 0: [mem 0x00000000dc651000-0x00000000dc651fff] [ 0.000000] node 0: [mem 0x00000000dc695000-0x00000000dcdb9fff] [ 0.000000] node 0: [mem 0x00000000dcff2000-0x00000000dcffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012433efff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012433efff] [ 0.000000] On node 0 totalpages: 1048575 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14005 pages used for memmap [ 0.000000] DMA32 zone: 896292 pages, LIFO batch:31 [ 0.000000] Normal zone: 2317 pages used for memmap [ 0.000000] Normal zone: 148287 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is a00000 [ 0.000000] Remapped 148287 page(s) [ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.5.2 (preserve-AD) [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880124000000 s81048 r8192 d29544 u262144 [ 0.000000] pcpu-alloc: s81048 r8192 d29544 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032033 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=UUID=aeaa7943-af67-42eb-b6f9-e73ebf7296de ro rootflags=subvol=rootfs console=hvc0 earlyprintk=xen i915.modeset=1 xen-pciback.hide=(00:1b.0)(00:1d.0)(01:00.0)(02:00.0)(03:00.0)(04:00.0)(05:00.0)(06:00.0)(08:00.0)(0a:08.0)(0a:09.0)(0a:0a.0)(0a:0b.0) softlevel=xen.d [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] software IO TLB [mem 0x120000000-0x124000000] (64MB) mapped at [ffff880120000000-ffff880123ffffff] [ 0.000000] Memory: 4022428K/4194300K available (6464K kernel code, 601K rwdata, 1916K rodata, 1048K init, 652K bss, 171872K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:488 16 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] NO_HZ: Clearing 0 from nohz_full range for timekeeping [ 0.000000] NO_HZ: Full dynticks CPUs: 1-7. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [hvc0] enabled [ 0.000000] bootconsole [xenboot0] disabled [ 0.000000] clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 2394.640 MHz processor [ 5.857123] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.28 BogoMIPS (lpj=23946400) [ 5.857128] pid_max: default: 32768 minimum: 501 [ 5.857137] ACPI: Core revision 20150410 [ 5.882925] ACPI: All ACPI Tables successfully acquired [ 5.883910] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 5.884894] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 5.885262] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 5.885275] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 5.885525] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 5.885529] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 5.885533] CPU: Physical Processor ID: 0 [ 5.885535] CPU: Processor Core ID: 0 [ 5.885539] mce: CPU supports 2 MCE banks [ 5.885553] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 5.885555] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 5.885978] Freeing SMP alternatives memory: 32K (ffffffff819d5000 - ffffffff819dd000) [ 5.892800] cpu 0 spinlock event irq 25 [ 5.893613] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 5.893862] installing Xen timer for CPU 1 [ 5.893873] cpu 1 spinlock event irq 32 [ 5.894185] installing Xen timer for CPU 2 [ 5.894195] cpu 2 spinlock event irq 39 [ 5.894487] installing Xen timer for CPU 3 [ 5.894496] cpu 3 spinlock event irq 46 [ 5.894771] installing Xen timer for CPU 4 [ 5.894781] cpu 4 spinlock event irq 53 [ 5.895042] installing Xen timer for CPU 5 [ 5.895051] cpu 5 spinlock event irq 60 [ 5.895290] installing Xen timer for CPU 6 [ 5.895298] cpu 6 spinlock event irq 67 [ 5.895531] installing Xen timer for CPU 7 [ 5.895539] cpu 7 spinlock event irq 74 [ 5.895687] x86: Booted up 1 node, 8 CPUs [ 5.895864] devtmpfs: initialized [ 5.896262] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 5.896325] xor: automatically using best checksumming function: [ 5.987368] avx : 22624.400 MB/sec [ 5.987463] NET: Registered protocol family 16 [ 5.987474] xen:grant_table: Grant tables using version 1 layout [ 5.987483] Grant table initialized [ 5.987765] ACPI: bus type PCI registered [ 5.987898] dca service started, version 1.12.1 [ 5.987923] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 5.987928] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 5.994529] PCI: Using configuration type 1 for base access [ 6.167436] raid6: sse2x1 gen() 6308 MB/s [ 6.337484] raid6: sse2x1 xor() 5051 MB/s [ 6.507550] raid6: sse2x2 gen() 7885 MB/s [ 6.677602] raid6: sse2x2 xor() 5666 MB/s [ 6.847651] raid6: sse2x4 gen() 9175 MB/s [ 7.017703] raid6: sse2x4 xor() 6816 MB/s [ 7.017706] raid6: using algorithm sse2x4 gen() 9175 MB/s [ 7.017709] raid6: .... xor() 6816 MB/s, rmw enabled [ 7.017711] raid6: using ssse3x2 recovery algorithm [ 7.017758] ACPI: Added _OSI(Module Device) [ 7.017764] ACPI: Added _OSI(Processor Device) [ 7.017769] ACPI: Added _OSI(3.0 _SCP Extensions) [ 7.017772] ACPI: Added _OSI(Processor Aggregator Device) [ 7.019223] xen: registering gsi 9 triggering 0 polarity 0 [ 7.020992] ACPI: Executed 1 blocks of module-level executable AML code [ 7.024561] ACPI: Dynamic OEM Table Load: [ 7.024570] ACPI: SSDT 0xFFFF88011FC1D000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 7.025236] ACPI: Dynamic OEM Table Load: [ 7.025242] ACPI: SSDT 0xFFFF88011F199000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 7.025773] ACPI: Dynamic OEM Table Load: [ 7.025779] ACPI: SSDT 0xFFFF88011F123A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 7.027766] ACPI: Interpreter enabled [ 7.027773] ACPI: (supports S0 S5) [ 7.027776] ACPI: Using IOAPIC for interrupt routing [ 7.027806] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 7.035495] ACPI: Power Resource [FN00] (off) [ 7.035571] ACPI: Power Resource [FN01] (off) [ 7.035644] ACPI: Power Resource [FN02] (off) [ 7.035717] ACPI: Power Resource [FN03] (off) [ 7.035791] ACPI: Power Resource [FN04] (off) [ 7.036475] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 7.036482] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 7.036835] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 7.037043] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 7.037422] PCI host bridge to bus 0000:00 [ 7.037427] pci_bus 0000:00: root bus resource [bus 00-3e] [ 7.037430] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 7.037433] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 7.037437] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 7.037440] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 7.037443] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 7.037447] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 7.037451] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 7.037454] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 7.037458] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 7.037461] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 7.037476] pci 0000:00:00.0: [8086:0108] type 00 class 0x060000 [ 7.037634] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 7.037733] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 7.037780] pci 0000:00:01.0: System wakeup disabled by ACPI [ 7.037838] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400 [ 7.037923] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 7.037966] pci 0000:00:01.1: System wakeup disabled by ACPI [ 7.038062] pci 0000:00:02.0: [8086:010a] type 00 class 0x030000 [ 7.038088] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 7.038106] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 7.038117] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 7.038284] pci 0000:00:06.0: [8086:010d] type 01 class 0x060400 [ 7.038369] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 7.038413] pci 0000:00:06.0: System wakeup disabled by ACPI [ 7.038492] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 7.038529] pci 0000:00:16.0: reg 0x10: [mem 0xf7f2c000-0xf7f2c00f 64bit] [ 7.038655] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 7.038766] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 7.038795] pci 0000:00:19.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff] [ 7.038809] pci 0000:00:19.0: reg 0x14: [mem 0xf7f29000-0xf7f29fff] [ 7.038824] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 7.038931] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 7.038977] pci 0000:00:19.0: System wakeup disabled by ACPI [ 7.039033] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 7.039064] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f28000-0xf7f283ff] [ 7.039207] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 7.039269] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 7.039330] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 7.039360] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f20000-0xf7f23fff 64bit] [ 7.039523] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 7.039570] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 7.039628] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 7.039755] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 7.039788] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 7.039793] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 7.039827] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 7.039890] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 7.040018] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 7.040048] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 7.040053] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 7.040087] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 7.040149] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 7.040276] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 7.040306] pci 0000:00:1c.6: Enabling MPC IRBNCE [ 7.040311] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled [ 7.040345] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 7.040405] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 7.040436] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f27000-0xf7f273ff] [ 7.040579] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 7.040642] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 7.040696] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 7.040855] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 7.040909] pci 0000:00:1f.0: [8086:1c56] type 00 class 0x060100 [ 7.041165] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 7.041195] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 7.041209] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 7.041223] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 7.041238] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 7.041252] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 7.041267] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f26000-0xf7f267ff] [ 7.041339] pci 0000:00:1f.2: PME# supported from D3hot [ 7.041429] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 7.041457] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f25000-0xf7f250ff 64bit] [ 7.041497] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 7.041674] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 7.041693] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 7.041712] pci 0000:01:00.0: reg 0x14: [mem 0xf7ec0000-0xf7ec3fff 64bit] [ 7.041731] pci 0000:01:00.0: reg 0x1c: [mem 0xf7e80000-0xf7ebffff 64bit] [ 7.041755] pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e7ffff pref] [ 7.041820] pci 0000:01:00.0: supports D1 D2 [ 7.057784] pci 0000:00:01.0: PCI bridge to [bus 01] [ 7.057793] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.057798] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 7.057883] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060400 [ 7.058029] pci 0000:02:00.0: supports D1 D2 [ 7.058030] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7.077819] pci 0000:00:01.1: PCI bridge to [bus 02-03] [ 7.077831] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 7.077924] pci 0000:03:00.0: [1b74:0100] type 00 class 0xff0000 [ 7.077951] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff] [ 7.078199] pci 0000:02:00.0: PCI bridge to [bus 03] [ 7.078216] pci 0000:02:00.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 7.078338] pci 0000:04:00.0: [168c:0030] type 00 class 0x028000 [ 7.078369] pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff 64bit] [ 7.078438] pci 0000:04:00.0: reg 0x30: [mem 0xf7c20000-0xf7c2ffff pref] [ 7.078505] pci 0000:04:00.0: supports D1 [ 7.078507] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 7.097851] pci 0000:00:06.0: PCI bridge to [bus 04] [ 7.097862] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 7.097977] pci 0000:05:00.0: [10b5:8112] type 01 class 0x060400 [ 7.098210] pci 0000:05:00.0: supports D1 [ 7.098212] pci 0000:05:00.0: PME# supported from D0 D1 D3hot [ 7.098251] pci 0000:05:00.0: System wakeup disabled by ACPI [ 7.098309] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 7.098329] pci 0000:00:1c.0: PCI bridge to [bus 05-06] [ 7.098340] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 7.098446] pci 0000:06:00.0: [1b74:0810] type 00 class 0x078000 [ 7.098484] pci 0000:06:00.0: reg 0x10: [mem 0xf7b00000-0xf7b7ffff] [ 7.098864] pci 0000:05:00.0: PCI bridge to [bus 06] [ 7.098881] pci 0000:05:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 7.099005] pci 0000:07:00.0: [8086:10d3] type 00 class 0x020000 [ 7.099082] pci 0000:07:00.0: reg 0x10: [mem 0xf7a40000-0xf7a5ffff] [ 7.099133] pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd01f] [ 7.099159] pci 0000:07:00.0: reg 0x1c: [mem 0xf7a60000-0xf7a63fff] [ 7.099234] pci 0000:07:00.0: reg 0x30: [mem 0xf7a00000-0xf7a3ffff pref] [ 7.099370] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 7.099411] pci 0000:07:00.0: System wakeup disabled by ACPI [ 7.117941] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 7.117952] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 7.117958] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff] [ 7.118069] pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330 [ 7.118113] pci 0000:08:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit] [ 7.118325] pci 0000:08:00.0: PME# supported from D0 D3hot [ 7.118365] pci 0000:08:00.0: System wakeup disabled by ACPI [ 7.118498] pci 0000:00:1c.6: PCI bridge to [bus 08] [ 7.118509] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff] [ 7.118576] pci 0000:09:00.0: [12d8:8148] type 01 class 0x060400 [ 7.118707] pci 0000:09:00.0: supports D1 D2 [ 7.118826] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode) [ 7.118834] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 7.118839] pci 0000:00:1e.0: bridge window [mem 0xf7800000-0xf78fffff] [ 7.118849] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 7.118850] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 7.118852] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 7.118854] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 7.118855] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 7.118857] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 7.118859] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 7.118860] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 7.118862] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 7.118863] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode) [ 7.118957] pci 0000:0a:08.0: [10ec:8139] type 00 class 0x020000 [ 7.118993] pci 0000:0a:08.0: reg 0x10: [io 0xc200-0xc2ff] [ 7.119014] pci 0000:0a:08.0: reg 0x14: [mem 0xf7842000-0xf78420ff] [ 7.119114] pci 0000:0a:08.0: reg 0x30: [mem 0xf7830000-0xf783ffff pref] [ 7.119169] pci 0000:0a:08.0: supports D1 D2 [ 7.119171] pci 0000:0a:08.0: PME# supported from D1 D2 D3hot D3cold [ 7.119244] pci 0000:0a:09.0: [10ec:8139] type 00 class 0x020000 [ 7.119279] pci 0000:0a:09.0: reg 0x10: [io 0xc100-0xc1ff] [ 7.119301] pci 0000:0a:09.0: reg 0x14: [mem 0xf7841000-0xf78410ff] [ 7.119400] pci 0000:0a:09.0: reg 0x30: [mem 0xf7820000-0xf782ffff pref] [ 7.119455] pci 0000:0a:09.0: supports D1 D2 [ 7.119457] pci 0000:0a:09.0: PME# supported from D1 D2 D3hot D3cold [ 7.119528] pci 0000:0a:0a.0: [10ec:8139] type 00 class 0x020000 [ 7.119564] pci 0000:0a:0a.0: reg 0x10: [io 0xc000-0xc0ff] [ 7.119585] pci 0000:0a:0a.0: reg 0x14: [mem 0xf7840000-0xf78400ff] [ 7.119685] pci 0000:0a:0a.0: reg 0x30: [mem 0xf7810000-0xf781ffff pref] [ 7.119740] pci 0000:0a:0a.0: supports D1 D2 [ 7.119741] pci 0000:0a:0a.0: PME# supported from D1 D2 D3hot D3cold [ 7.119814] pci 0000:0a:0b.0: [168c:0029] type 00 class 0x028000 [ 7.119885] pci 0000:0a:0b.0: reg 0x10: [mem 0xf7800000-0xf780ffff] [ 7.120058] pci 0000:0a:0b.0: PME# supported from D0 D3hot [ 7.120167] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 7.120180] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 7.120186] pci 0000:09:00.0: bridge window [mem 0xf7800000-0xf78fffff] [ 7.121200] xen: registering gsi 13 triggering 1 polarity 0 [ 7.121416] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 *14 15) [ 7.121484] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15) [ 7.121549] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 7.121614] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 7.121679] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 *14 15) [ 7.121742] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 7.121808] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15) [ 7.121872] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 *14 15) [ 7.122093] ACPI: Enabled 4 GPEs in block 00 to 3F [ 7.122131] xen:balloon: Initialising balloon driver [ 7.122282] xen_balloon: Initialising balloon driver [ 7.122407] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 7.122411] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 7.122417] vgaarb: loaded [ 7.122419] vgaarb: bridge control possible 0000:00:02.0 [ 7.122478] SCSI subsystem initialized [ 7.122490] libata version 3.00 loaded. [ 7.122493] ACPI: bus type USB registered [ 7.122511] usbcore: registered new interface driver usbfs [ 7.122521] usbcore: registered new interface driver hub [ 7.122546] usbcore: registered new device driver usb [ 7.122572] pps_core: LinuxPPS API ver. 1 registered [ 7.122574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 7.122581] PTP clock support registered [ 7.122744] PCI: Using ACPI for IRQ routing [ 7.125846] PCI: pci_cache_line_size set to 64 bytes [ 7.125989] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 7.125991] e820: reserve RAM buffer [mem 0xdb9f0000-0xdbffffff] [ 7.125992] e820: reserve RAM buffer [mem 0xdc652000-0xdfffffff] [ 7.125994] e820: reserve RAM buffer [mem 0xdcdba000-0xdfffffff] [ 7.125996] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff] [ 7.125997] e820: reserve RAM buffer [mem 0x12433f000-0x127ffffff] [ 7.126196] Switched to clocksource xen [ 7.126334] pnp: PnP ACPI init [ 7.126412] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 7.126417] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.126491] system 00:01: [io 0x0680-0x069f] has been reserved [ 7.126495] system 00:01: [io 0x1000-0x100f] has been reserved [ 7.126498] system 00:01: [io 0xffff] has been reserved [ 7.126501] system 00:01: [io 0xffff] has been reserved [ 7.126504] system 00:01: [io 0x0400-0x0453] could not be reserved [ 7.126508] system 00:01: [io 0x0458-0x047f] has been reserved [ 7.126511] system 00:01: [io 0x0500-0x057f] has been reserved [ 7.126514] system 00:01: [io 0x164e-0x164f] has been reserved [ 7.126518] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.126525] xen: registering gsi 8 triggering 1 polarity 0 [ 7.126554] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 7.126600] system 00:03: [io 0x0454-0x0457] has been reserved [ 7.126604] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 7.126768] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 7.126772] system 00:04: [io 0x0a10-0x0a1f] has been reserved [ 7.126805] system 00:04: [io 0x0a10-0x0a1f] has been reserved [ 7.126808] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.126829] xen: registering gsi 1 triggering 1 polarity 0 [ 7.126863] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 7.127155] ACPI: IRQ 4 override to edge, high [ 7.127158] xen: registering gsi 4 triggering 1 polarity 0 [ 7.127160] Already setup the GSI :4 [ 7.127207] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 7.127808] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 7.127813] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.128070] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 7.128074] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 7.128077] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 7.128081] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 7.128084] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 7.128087] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 7.128091] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 7.128094] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 7.128098] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 7.128101] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved [ 7.128104] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 7.128108] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.128274] system 00:09: [mem 0x20000000-0x201fffff] has been reserved [ 7.128277] system 00:09: [mem 0x40000000-0x401fffff] has been reserved [ 7.128281] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.128297] pnp: PnP ACPI: found 10 devices [ 7.128333] pciback 0000:00:1b.0: seizing device [ 7.128345] pciback 0000:00:1d.0: seizing device [ 7.128360] pciback 0000:01:00.0: seizing device [ 7.128365] pciback 0000:02:00.0: seizing device [ 7.128370] pciback 0000:03:00.0: seizing device [ 7.128374] pciback 0000:04:00.0: seizing device [ 7.128379] pciback 0000:05:00.0: seizing device [ 7.128383] pciback 0000:06:00.0: seizing device [ 7.128390] pciback 0000:08:00.0: seizing device [ 7.128397] pciback 0000:0a:08.0: seizing device [ 7.128403] pciback 0000:0a:09.0: seizing device [ 7.128408] pciback 0000:0a:0a.0: seizing device [ 7.128412] pciback 0000:0a:0b.0: seizing device [ 7.135752] PM-Timer failed consistency check (0xffffff) - aborting. [ 7.135875] pci 0000:00:01.0: PCI bridge to [bus 01] [ 7.135880] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.135888] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 7.135899] pciback 0000:02:00.0: PCI bridge to [bus 03] [ 7.135909] pciback 0000:02:00.0: bridge window [mem 0xf7d00000-0xf7dfffff] [ 7.135925] pci 0000:00:01.1: PCI bridge to [bus 02-03] [ 7.135931] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 7.135943] pci 0000:00:06.0: PCI bridge to [bus 04] [ 7.135949] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff] [ 7.135960] pciback 0000:05:00.0: PCI bridge to [bus 06] [ 7.135974] pciback 0000:05:00.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 7.135999] pci 0000:00:1c.0: PCI bridge to [bus 05-06] [ 7.136008] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 7.136023] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 7.136027] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 7.136036] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff] [ 7.136051] pci 0000:00:1c.6: PCI bridge to [bus 08] [ 7.136060] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff] [ 7.136075] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 7.136080] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 7.136090] pci 0000:09:00.0: bridge window [mem 0xf7800000-0xf78fffff] [ 7.136106] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] [ 7.136111] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 7.136120] pci 0000:00:1e.0: bridge window [mem 0xf7800000-0xf78fffff] [ 7.136134] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 7.136136] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 7.136138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 7.136140] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 7.136141] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 7.136143] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 7.136145] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 7.136146] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 7.136148] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 7.136150] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window] [ 7.136151] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 7.136153] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] [ 7.136155] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 7.136156] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 7.136158] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 7.136160] pci_bus 0000:05: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 7.136161] pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 7.136163] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] [ 7.136165] pci_bus 0000:07: resource 1 [mem 0xf7a00000-0xf7afffff] [ 7.136166] pci_bus 0000:08: resource 1 [mem 0xf7900000-0xf79fffff] [ 7.136168] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 7.136169] pci_bus 0000:09: resource 1 [mem 0xf7800000-0xf78fffff] [ 7.136171] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7 window] [ 7.136173] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff window] [ 7.136174] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff window] [ 7.136176] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff window] [ 7.136178] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff window] [ 7.136179] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff window] [ 7.136181] pci_bus 0000:09: resource 10 [mem 0x000dc000-0x000dffff window] [ 7.136192] pci_bus 0000:09: resource 11 [mem 0x000e0000-0x000e3fff window] [ 7.136194] pci_bus 0000:09: resource 12 [mem 0x000e4000-0x000e7fff window] [ 7.136196] pci_bus 0000:09: resource 13 [mem 0xdfa00000-0xfeafffff window] [ 7.136198] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 7.136199] pci_bus 0000:0a: resource 1 [mem 0xf7800000-0xf78fffff] [ 7.136223] NET: Registered protocol family 2 [ 7.136371] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 7.136487] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 7.136555] TCP: Hash tables configured (established 32768 bind 32768) [ 7.136584] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 7.136607] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 7.136649] NET: Registered protocol family 1 [ 7.136750] RPC: Registered named UNIX socket transport module. [ 7.136753] RPC: Registered udp transport module. [ 7.136756] RPC: Registered tcp transport module. [ 7.136758] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.137220] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 7.137976] pci 0000:00:02.0: Video device with shadowed ROM [ 7.138063] xen: registering gsi 16 triggering 0 polarity 1 [ 7.138073] xen: --> pirq=16 -> irq=16 (gsi=16) [ 7.156353] xen: registering gsi 23 triggering 0 polarity 1 [ 7.156361] xen: --> pirq=23 -> irq=23 (gsi=23) [ 7.176384] PCI: CLS mismatch (64 != 32), using 64 bytes [ 7.176455] xen: registering gsi 18 triggering 0 polarity 1 [ 7.176464] xen: --> pirq=18 -> irq=18 (gsi=18) [ 7.176511] xen: registering gsi 18 triggering 0 polarity 1 [ 7.176513] Already setup the GSI :18 [ 7.176628] Unpacking initramfs... [ 7.181511] Freeing initrd memory: 9208K (ffff880004000000 - ffff8800048fe000) [ 7.181617] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 7.181621] hw unit of domain pp0-core 2^-16 Joules [ 7.181623] hw unit of domain package 2^-16 Joules [ 7.181626] hw unit of domain pp1-gpu 2^-16 Joules [ 7.182865] AVX version of gcm_enc/dec engaged. [ 7.182870] AES CTR mode by8 optimization enabled [ 7.183733] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 7.183901] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 7.185768] zpool: loaded [ 7.185772] zbud: loaded [ 7.186507] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 7.186727] NFS: Registering the id_resolver key type [ 7.186737] Key type id_resolver registered [ 7.186740] Key type id_legacy registered [ 7.186744] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 7.187105] async_tx: api initialized (async) [ 7.187139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 7.187144] io scheduler noop registered [ 7.187186] io scheduler cfq registered (default) [ 7.187346] xen: registering gsi 16 triggering 0 polarity 1 [ 7.187350] Already setup the GSI :16 [ 7.187532] xen: registering gsi 16 triggering 0 polarity 1 [ 7.187534] Already setup the GSI :16 [ 7.187690] xen: registering gsi 19 triggering 0 polarity 1 [ 7.187699] xen: --> pirq=19 -> irq=19 (gsi=19) [ 7.187864] xen: registering gsi 16 triggering 0 polarity 1 [ 7.187866] Already setup the GSI :16 [ 7.187997] xen: registering gsi 16 triggering 0 polarity 1 [ 7.187998] Already setup the GSI :16 [ 7.188168] intel_idle: MWAIT substates: 0x1120 [ 7.188170] intel_idle: v0.4 model 0x2A [ 7.188171] intel_idle: lapic_timer_reliable_states 0xffffffff [ 7.188222] intel_idle: intel_idle yielding to none [ 7.188228] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 7.188392] xen:xen_evtchn: Event-channel device installed [ 7.188658] xen: registering gsi 19 triggering 0 polarity 1 [ 7.188660] Already setup the GSI :19 [ 7.236394] xen: registering gsi 18 triggering 0 polarity 1 [ 7.236398] Already setup the GSI :18 [ 7.276402] xen: registering gsi 17 triggering 0 polarity 1 [ 7.276413] xen: --> pirq=17 -> irq=17 (gsi=17) [ 7.316413] xen: registering gsi 16 triggering 0 polarity 1 [ 7.316417] Already setup the GSI :16 [ 7.356411] xen: registering gsi 18 triggering 0 polarity 1 [ 7.356414] Already setup the GSI :18 [ 8.176258] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x22847025dca, max_idle_ns: 440795321856 ns [ 8.386463] xen: registering gsi 16 triggering 0 polarity 1 [ 8.386467] Already setup the GSI :16 [ 8.386506] xen: registering gsi 16 triggering 0 polarity 1 [ 8.386508] Already setup the GSI :16 [ 9.176558] Switched to clocksource tsc [ 9.456419] xen: registering gsi 19 triggering 0 polarity 1 [ 9.456422] Already setup the GSI :19 [ 9.496408] xen: registering gsi 17 triggering 0 polarity 1 [ 9.496412] Already setup the GSI :17 [ 9.496445] xen: registering gsi 17 triggering 0 polarity 1 [ 9.496447] Already setup the GSI :17 [ 10.526605] xen: registering gsi 16 triggering 0 polarity 1 [ 10.526608] Already setup the GSI :16 [ 10.636527] xen: registering gsi 23 triggering 0 polarity 1 [ 10.636531] Already setup the GSI :23 [ 10.746540] xen: registering gsi 22 triggering 0 polarity 1 [ 10.746550] xen: --> pirq=22 -> irq=22 (gsi=22) [ 10.856528] xen_pciback: backend is vpci [ 10.861420] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 10.861873] hpet_acpi_add: no address or irqs in _CRS [ 10.861902] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 10.863363] loop: module loaded [ 10.863477] zram: Created 1 device(s) [ 10.863576] xen: registering gsi 16 triggering 0 polarity 1 [ 10.863579] Already setup the GSI :16 [ 10.869720] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254) [ 10.869730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.869736] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254) [ 10.869742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.869746] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254) [ 10.869752] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.869755] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254) [ 10.869762] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.869766] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.869830] ahci 0000:00:1f.2: version 3.0 [ 10.869903] xen: registering gsi 19 triggering 0 polarity 1 [ 10.869906] Already setup the GSI :19 [ 10.886312] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 10.886317] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 10.986935] scsi host0: ahci [ 10.987191] scsi host1: ahci [ 10.987313] scsi host2: ahci [ 10.987424] scsi host3: ahci [ 10.987531] scsi host4: ahci [ 10.987635] scsi host5: ahci [ 10.987671] ata1: SATA max UDMA/133 abar m2048@0xf7f26000 port 0xf7f26100 irq 88 [ 10.987676] ata2: SATA max UDMA/133 abar m2048@0xf7f26000 port 0xf7f26180 irq 88 [ 10.987679] ata3: SATA max UDMA/133 abar m2048@0xf7f26000 port 0xf7f26200 irq 88 [ 10.987683] ata4: SATA max UDMA/133 abar m2048@0xf7f26000 port 0xf7f26280 irq 88 [ 10.987687] ata5: SATA max UDMA/133 abar m2048@0xf7f26000 port 0xf7f26300 irq 88 [ 10.987690] ata6: SATA max UDMA/133 abar m2048@0xf7f26000 port 0xf7f26380 irq 88 [ 10.987724] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 10.987728] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 10.987833] xen: registering gsi 20 triggering 0 polarity 1 [ 10.987843] xen: --> pirq=20 -> irq=20 (gsi=20) [ 10.987961] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.192428] e1000e 0000:00:19.0 eth0: registered PHC clock [ 11.192433] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:18:7d:1d:72:74 [ 11.192437] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 11.192480] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 11.192543] xen: registering gsi 16 triggering 0 polarity 1 [ 11.192545] Already setup the GSI :16 [ 11.192742] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.310330] e1000e 0000:07:00.0 eth1: registered PHC clock [ 11.310336] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:18:7d:1d:71:de [ 11.310340] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 11.310431] e1000e 0000:07:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 11.310463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.310468] ehci-pci: EHCI PCI platform driver [ 11.310555] xen: registering gsi 16 triggering 0 polarity 1 [ 11.310557] Already setup the GSI :16 [ 11.310593] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 11.310600] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 11.310619] ehci-pci 0000:00:1a.0: debug port 2 [ 11.314579] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 11.314617] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f28000 [ 11.326295] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 11.326478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.326484] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.326488] usb usb1: Product: EHCI Host Controller [ 11.326490] usb usb1: Manufacturer: Linux 4.1.7-hardened-r1 ehci_hcd [ 11.326493] usb usb1: SerialNumber: 0000:00:1a.0 [ 11.326639] hub 1-0:1.0: USB hub found [ 11.326661] hub 1-0:1.0: 2 ports detected [ 11.326933] usbcore: registered new interface driver usbserial [ 11.326953] usbcore: registered new interface driver ftdi_sio [ 11.326963] usbserial: USB Serial support registered for FTDI USB Serial Device [ 11.326997] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 11.327000] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 11.327172] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.327346] mousedev: PS/2 mouse device common for all mice [ 11.327394] rtc_cmos 00:02: RTC can wake from S4 [ 11.327628] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 11.327689] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 11.327899] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 11.327922] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 11.328058] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.328074] md: raid1 personality registered for level 1 [ 11.328079] md: raid10 personality registered for level 10 [ 11.328234] md: raid6 personality registered for level 6 [ 11.328238] md: raid5 personality registered for level 5 [ 11.328241] md: raid4 personality registered for level 4 [ 11.328331] device-mapper: uevent: version 1.0.3 [ 11.328489] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@xxxxxxxxxx [ 11.328498] device-mapper: raid: Loading target version 1.6.0 [ 11.328519] hidraw: raw HID events driver (C) Jiri Kosina [ 11.328655] NET: Registered protocol family 17 [ 11.328677] Key type dns_resolver registered [ 11.328863] mce: Unable to init device /dev/mcelog (rc: -16) [ 11.329351] registered taskstats version 1 [ 11.329910] Btrfs loaded [ 11.330651] rtc_cmos 00:02: setting system clock to 2015-11-15 23:53:36 UTC (1447631616) [ 11.336299] ata5: SATA link down (SStatus 0 SControl 300) [ 11.336332] ata3: SATA link down (SStatus 0 SControl 300) [ 11.336354] ata4: SATA link down (SStatus 0 SControl 300) [ 11.336375] ata6: SATA link down (SStatus 0 SControl 300) [ 11.346342] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 11.346365] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 11.346413] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 11.347957] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 11.347962] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 11.347970] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 11.348276] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 11.348279] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 11.348285] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 11.349605] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 11.349611] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 11.349912] ata2.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 11.349915] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 11.351161] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 11.351164] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 11.351171] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 11.351736] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 11.351740] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 11.351746] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 11.352530] ata1.00: configured for UDMA/133 [ 11.352700] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 11.352930] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 11.353096] sd 0:0:0:0: [sda] Write Protect is off [ 11.353102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.353147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.354189] ata2.00: configured for UDMA/133 [ 11.354304] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 11.354541] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 11.354655] sd 1:0:0:0: [sdb] Write Protect is off [ 11.354660] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.354693] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.399691] sda: sda1 sda2 sda3 sda4 sda5 [ 11.400298] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.402760] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 [ 11.403436] sd 1:0:0:0: [sdb] Attached SCSI disk [ 11.403838] Freeing unused kernel memory: 1048K (ffffffff818cf000 - ffffffff819d5000) [ 11.644555] BTRFS: device label root devid 1 transid 926982 /dev/sdb4 [ 11.644694] BTRFS: device label root devid 3 transid 926982 /dev/sda4 [ 11.646312] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 11.647928] md: md1 stopped. [ 11.648542] md: bind [ 11.648696] md: bind [ 11.649038] md/raid1:md1: active with 2 out of 2 mirrors [ 11.649058] md1: detected capacity change from 0 to 1073676288 [ 11.652270] md: md2 stopped. [ 11.652850] md: bind [ 11.652998] md: bind [ 11.653311] md/raid1:md2: active with 2 out of 2 mirrors [ 11.653328] md2: detected capacity change from 0 to 17179803648 [ 11.656723] md: md3 stopped. [ 11.657316] md: bind [ 11.657462] md: bind [ 11.657736] md/raid1:md3: active with 2 out of 2 mirrors [ 11.657753] md3: detected capacity change from 0 to 844374736896 [ 11.797013] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 11.797016] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 11.797416] hub 1-1:1.0: USB hub found [ 11.797593] hub 1-1:1.0: 6 ports detected [ 11.977886] BTRFS info (device sda4): enabling auto defrag [ 11.977889] BTRFS info (device sda4): disk space caching is enabled [ 12.002584] random: nonblocking pool is initialized [ 12.076342] usb 1-1.6: new full-speed USB device number 3 using ehci-pci [ 12.195822] usb 1-1.6: New USB device found, idVendor=0403, idProduct=fc0d [ 12.195825] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.195827] usb 1-1.6: Product: Crystalfontz CFA635-USB LCD [ 12.195829] usb 1-1.6: Manufacturer: Crystalfontz [ 12.195830] usb 1-1.6: SerialNumber: CF004445 [ 12.199835] ftdi_sio 1-1.6:1.0: FTDI USB Serial Device converter detected [ 12.199855] usb 1-1.6: Detected FT232RL [ 12.200420] usb 1-1.6: FTDI USB Serial Device converter now attached to ttyUSB0 [ 15.473634] udevd[322]: starting version 3.1.2 [ 16.242876] Monitor-Mwait will be used to enter C-1 state [ 16.242905] Monitor-Mwait will be used to enter C-2 state [ 16.242927] Monitor-Mwait will be used to enter C-3 state [ 16.244799] Warning: Processor Platform Limit not supported. [ 16.263178] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 16.263183] ACPI: Power Button [PWRB] [ 16.263226] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 16.263228] ACPI: Power Button [PWRF] [ 16.286497] EDAC MC: Ver: 3.0.0 [ 16.300701] Linux agpgart interface v0.103 [ 16.303254] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 16.320396] xen: registering gsi 18 triggering 0 polarity 1 [ 16.320402] Already setup the GSI :18 [ 16.320410] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254) [ 16.320416] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.329659] thermal LNXTHERM:00: registered as thermal_zone0 [ 16.329662] ACPI: Thermal Zone [TZ00] (28 C) [ 16.329962] thermal LNXTHERM:01: registered as thermal_zone1 [ 16.329964] ACPI: Thermal Zone [TZ01] (30 C) [ 16.376579] e1000e 0000:07:00.0 enp7s0: renamed from eth1 [ 16.396998] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED) [ 16.397477] [drm] Initialized drm 1.1.0 20060810 [ 16.474564] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 17.064042] xen: registering gsi 16 triggering 0 polarity 1 [ 17.064048] Already setup the GSI :16 [ 17.064949] [drm] Memory usable by graphics device = 2048M [ 17.064951] [drm] Replacing VGA console driver [ 17.065495] Console: switching to colour dummy device 128x54 [ 17.097700] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 17.097702] [drm] Driver supports precise vblank timestamp query. [ 17.097854] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.101748] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 17.102011] acpi device:49: registered as cooling_device13 [ 17.102116] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 17.102153] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 17.126051] fbcon: inteldrmfb (fb0) is primary device [ 17.172350] Console: switching to colour frame buffer device 128x48 [ 17.174173] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 17.174175] i915 0000:00:02.0: registered panic notifier [ 20.318348] device-mapper: thin: Data device (dm-25) discard unsupported: Disabling discard passdown. [ 21.699375] Adding 16777148k swap on /dev/md2. Priority:-1 extents:1 across:16777148k FS [ 21.758189] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null) [ 24.396665] Ebtables v2.0 registered [ 24.592180] NET: Registered protocol family 10 [ 24.604096] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 24.695803] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.784627] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 24.792045] Bridge firewalling registered [ 25.187015] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 25.673933] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 26.129998] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 26.141869] bond0: Setting MII monitoring interval to 100 [ 26.282823] e1000e: enp0s25 NIC Link is Down [ 26.370699] e1000e: enp7s0 NIC Link is Down [ 26.377935] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready [ 26.383409] bond0: Adding slave enp0s25 [ 26.627066] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 26.627130] bond0: Enslaving enp0s25 as an active interface with a down link [ 26.632410] bond0: Adding slave enp7s0 [ 26.714000] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 26.714057] bond0: Enslaving enp7s0 as an active interface with a down link [ 27.211121] device bond0 entered promiscuous mode [ 27.218759] device xenbr0 entered promiscuous mode [ 27.221107] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready [ 29.117955] e1000e: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 29.157892] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 29.157904] NFSD: starting 90-second grace period (net ffffffff818b2140) [ 29.176893] bond0: link status definitely up for interface enp7s0, 1000 Mbps full duplex [ 29.176897] bond0: making interface enp7s0 the new active one [ 29.176899] device enp7s0 entered promiscuous mode [ 29.177230] bond0: first active interface up! [ 29.177239] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 29.177265] xenbr0: port 1(bond0) entered forwarding state [ 29.177271] xenbr0: port 1(bond0) entered forwarding state [ 29.177384] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 29.522944] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 29.576944] bond0: link status definitely up for interface enp0s25, 1000 Mbps full duplex [ 31.946335] xen_acpi_processor: Uploading Xen processor PM info [ 34.446872] vif vif-1-0 pfsense.0: renamed from vif1.0 [ 34.531662] device pfsense.0 entered promiscuous mode [ 34.534200] IPv6: ADDRCONF(NETDEV_UP): pfsense.0: link is not ready [ 35.020524] xen_pciback: vpci: 0000:04:00.0: assign to virtual slot 0 [ 35.048250] pciback 0000:04:00.0: registering for 1 [ 35.052729] xen_pciback: vpci: 0000:0a:08.0: assign to virtual slot 1 [ 35.054293] pciback 0000:0a:08.0: registering for 1 [ 35.054987] xen_pciback: vpci: 0000:0a:0b.0: assign to virtual slot 2 [ 35.056013] pciback 0000:0a:0b.0: registering for 1 [ 36.378547] xenbr0: port 2(pfsense.0) entered disabled state [ 36.378820] device pfsense.0 left promiscuous mode [ 36.378824] xenbr0: port 2(pfsense.0) entered disabled state [ 44.217632] xenbr0: port 1(bond0) entered forwarding state