Re: [Xen-devel] Dom0 kernel for Xen4.6 on R-Car H2 (LAGER)

[Julien Grall <julien.grall@xxxxxxxxxx>]

Hello Max,

On 19/10/15 13:09, Ferger, Max wrote:
> - UART enabled -
> - CPU 00000000 booting -
> - Xen starting in Hyp mode -
> - Zero BSS -
> - Setting up control registers -
> - Turning on paging -
> - Ready -
> (XEN) Checking for initrd in /chosen
> (XEN) RAM: 0000000040000000 - 000000007fffffff
> (XEN) RAM: 0000000140000000 - 00000001ffffffff
> (XEN)
> (XEN) MODULE[0]: 00000000407f2000 - 00000000407fd000 Device Tree
> (XEN) MODULE[1]: 0000000072000000 - 00000000722fd158 Kernel
> (XEN) MODULE[2]: 0000000074000000 - 0000000074002559 XSM
> (XEN)  RESVD[0]: 0000000070f00000 - 0000000070f0b000
> (XEN)  RESVD[1]: 000000007ff9a000 - 000000007ff9a120
> (XEN)  RESVD[2]: 00000000407f2000 - 00000000407fd000
> (XEN)
> (XEN) Command line: console=dtuart dtuart=/soc/serial@e6c50000 dom0_mem=1G
> (XEN) Placing Xen at 0x000000007fc00000-0x000000007fe00000
> (XEN) Update BOOTMOD_XEN from 0000000090000000-000000009011b701 => 
> 000000007fc00000-000000007fd1b701
> (XEN) Xen heap: 00000001f8000000-0000000200000000 (32768 pages)
> (XEN) Dom heap: 1015808 pages
> (XEN) Domain heap initialised
> (XEN) Platform: Renesas R-Car Gen2
> (XEN) Looking for dtuart at "/soc/serial@e6c50000", options ""
> (XEN) Unable to find device "/soc/serial@e6c50000"

You provided the wrong path to the UART. Xen will use earlyprintk rather
than the console.

If you use the upstream DT (arch/arm/boot/dts/r8a7790-lager.dts), it
contains a property stdout-path in the chosen node. As Xen is able to
understand it, you can drop "dtuart=/soc/...." and only keep console=dtuart
on the command line.

[...]

> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Loading kernel from boot module @ 0000000072000000
> (XEN) Allocating 1:1 mappings totalling 1024MB for dom0:
> (XEN) BANK[0] 0x00000048000000-0x00000070000000 (640MB)
> (XEN) BANK[1] 0x000001d8000000-0x000001f0000000 (384MB)
> (XEN) Grant table range: 0x0000007fc00000-0x0000007fc72000
> (XEN) DT: no ranges; cannot enumerate
> (XEN) Device tree generation failed (-22).

Can you turn on DEBUG_DT in xen/arch/arm/domain_build.c (see patch [1])
and paste the log here?

Also, can you send the device tree you are using?

Regards,

[1]
diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 0c3441a..bdb8b1f 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -40,7 +40,7 @@ static void __init parse_dom0_mem(const char *s)
 }
 custom_param("dom0_mem", parse_dom0_mem);
 
-//#define DEBUG_DT
+#define DEBUG_DT
 
 #ifdef DEBUG_DT
 # define DPRINT(fmt, args...) printk(XENLOG_DEBUG fmt, ##args)

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel