[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2 1/1] tools/hotplug: Scan xenstore once when attaching shared images files



During the attachment of a loopback mounted image file, the mode of all
curent instances of this device already attached to other domains must be
checked. This requires finding all loopback devices pointing to the inode
of the shared image file, and then comparing the major and minor number of
these devices to the major and minor number of every vbd device found in the
xenstore database.

Prior to this patch, the entire xenstore database is walked for every instance
of every loopback device pointing to the same shared image file. This process
causes the block attachment process to becomes exponentially slower with every
additional attachment of a shared image.

Rather than scanning all of xenstore for every instance of a shared loopback
device, this patch creates a list of the major and minor numbers from all
matching loopback devices. After generating this list, Xenstore is walked
once, and major and minor numbers from every vbd are checked against the list.
If a match is found, the mode of that vbd is checked for compatibility with
the mode of the device being attached.

Signed-off-by: Mike Latimer <mlatimer@xxxxxxxx>
---
 tools/hotplug/Linux/block | 76 +++++++++++++++++++++++++++++++----------------
 1 file changed, 50 insertions(+), 26 deletions(-)

diff --git a/tools/hotplug/Linux/block b/tools/hotplug/Linux/block
index 8d2ee9d..1c7a1f3 100644
--- a/tools/hotplug/Linux/block
+++ b/tools/hotplug/Linux/block
@@ -38,7 +38,7 @@ find_free_loopback_dev() {
 }
 
 ##
-# check_sharing device mode
+# check_sharing devtype device mode [inode]
 #
 # Check whether the device requested is already in use.  To use the device in
 # read-only mode, it may be in use in read-only mode, but may not be in use in
@@ -56,10 +56,34 @@ find_free_loopback_dev() {
 #
 check_sharing()
 {
-  local dev="$1"
-  local mode="$2"
+  local devtype=$1
+  local dev="$2"
+  local mode="$3"
+  local devmm=","
+
+  if [ "$devtype" = "file" ];
+  then
+    local inode="$4"
+
+    shared_list=$(losetup -a |
+          sed -n -e 
"s@^\([^:]\+\)\(:[[:blank:]]\[0*${dev}\]:${inode}[[:blank:]](.*)\)@\1@p" )
+    for dev in $shared_list
+    do
+      if [ -n "$dev" ]
+      then
+        devmm="${devmm}$(device_major_minor $dev),"
+      fi
+    done
+    # if $devmm is unchanged, file being checked is not a shared loopback 
device
+    if [ "$devmm" = "," ];
+    then
+      echo 'ok'
+      return
+    fi
+  else
+    devmm=${devmm}$(device_major_minor "$dev")","
+  fi
 
-  local devmm=$(device_major_minor "$dev")
   local file
 
   if [ "$mode" = 'w' ]
@@ -75,9 +99,10 @@ check_sharing()
     then
       local d=$(device_major_minor "$file")
 
-      if [ "$d" = "$devmm" ]
+      # checking for $d in $devmm is best through the [[...]] bashism
+      if [[ "$devmm" == *",$d,"* ]]
       then
-        echo 'local'
+        echo "local $d"
         return
       fi
     fi
@@ -90,13 +115,14 @@ check_sharing()
     do
       d=$(xenstore_read_default "$base_path/$dom/$dev/physical-device" "")
 
-      if [ "$d" = "$devmm" ]
+      # checking for $d in $devmm is best through the [[...]] bashism
+      if [ -n "$d" ] && [[ "$devmm" == *",$d,"* ]]
       then
         if [ "$mode" = 'w' ]
         then
           if ! same_vm $dom
           then
-            echo 'guest'
+            echo "guest $d"
             return
           fi
         else
@@ -107,7 +133,7 @@ check_sharing()
           then
             if ! same_vm $dom
             then
-              echo 'guest'
+              echo "guest $d"
               return
             fi
           fi
@@ -129,6 +155,7 @@ check_device_sharing()
 {
   local dev="$1"
   local mode=$(canonicalise_mode "$2")
+  local type="device"
   local result
 
   if [ "x$mode" = 'x!' ]
@@ -136,33 +163,38 @@ check_device_sharing()
     return 0
   fi
 
-  result=$(check_sharing "$dev" "$mode")
+  result=$(check_sharing "$type" "$dev" "$mode")
 
   if [ "$result" != 'ok' ]
   then
-    do_ebusy "Device $dev is mounted " "$mode" "$result"
+    do_ebusy "Device $dev is mounted " "$mode" "${result%% *}"
   fi
 }
 
 
 ##
-# check_device_sharing file dev mode
+# check_device_sharing file dev mode inode
 #
-# Perform the sharing check for the given file mounted through the given
-# loopback interface, in the given mode.
+# Perform the sharing check for the given file, with its corresponding
+# device, inode and mode. As the file can be mounted multiple times,
+# the inode is passed through to check_sharing for all instances to be
+# checked.
 #
 check_file_sharing()
 {
   local file="$1"
   local dev="$2"
   local mode="$3"
+  local inode="$4"
+  local type="file"
+  local result
 
-  result=$(check_sharing "$dev" "$mode")
+  result=$(check_sharing "$type" "$dev" "$mode" "$inode")
 
   if [ "$result" != 'ok' ]
   then
-    do_ebusy "File $file is loopback-mounted through $dev,
-which is mounted " "$mode" "$result"
+    do_ebusy "File $file is loopback-mounted through ${result#* },
+which is mounted " "$mode" "${result%% *}"
   fi
 }
 
@@ -281,15 +313,7 @@ mount it read-write in a guest domain."
             fatal "Unable to lookup $file: dev: $dev inode: $inode"
           fi
 
-          shared_list=$(losetup -a |
-                sed -n -e 
"s@^\([^:]\+\)\(:[[:blank:]]\[0*${dev}\]:${inode}[[:blank:]](.*)\)@\1@p" )
-          for dev in $shared_list
-          do
-            if [ -n "$dev" ]
-            then
-              check_file_sharing "$file" "$dev" "$mode"
-            fi
-          done
+          check_file_sharing "$file" "$dev" "$mode" "$inode"
         fi
 
         loopdev=$(losetup -f 2>/dev/null || find_free_loopback_dev)
-- 
1.8.4.5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.