Re: [Xen-devel] [osstest test] 60719: tolerable FAIL - PUSHED

[Ian Campbell <ian.campbell@xxxxxxxxxx>]

On Thu, 2015-09-03 at 10:35 -0600, Jim Fehlig wrote:
> On 09/03/2015 05:37 AM, Ian Campbell wrote:
> > On Thu, 2015-09-03 at 11:26 +0100, Ian Campbell wrote:
> > > Notice that it has bound to 127.0.1.1 and not to 10.80.228.77!
> > So while I investigate how to make d-i not create these entries I also
> > removed the line from /etc/hosts such that looking up the FQDN gives 
> > the
> > non-local IP. But:
> > 
> > 
> >      root@moss-bug:/var/log# strace -o /tmp/virsh -fff virsh --debug 0 
> > migrate --live debian.guest.osstest xen+ssh    ://10.80.228.77
> >      migrate: live(bool): (none)
> >      migrate: domain(optdata): debian.guest.osstest
> >      migrate: desturi(optdata): xen+ssh://10.80.228.77
> >      migrate: found option <domain>: debian.guest.osstest
> >      migrate: <domain> trying as domain NAME
> >      migrate: found option <domain>: debian.guest.osstest
> >      migrate: <domain> trying as domain NAME
> >      error: internal error: Failed to send migration data to 
> > destination host
> > 
> > The senders libxl-driver.log says:
> > 
> > 2015-09-03 12:29:45 BST libxl-save-helper: debug: starting save: 
> > Success
> > 2015-09-03 12:29:45 BST xc: detail: fd 27, dom 3, max_iters 0, 
> > max_factor 0, flags 1, hvm 0
> > 2015-09-03 12:29:45 BST xc: info: Saving domain 3, type x86 PV
> > 2015-09-03 12:29:45 BST xc: detail: 64 bits, 4 levels
> > 2015-09-03 12:29:45 BST xc: detail: max_pfn 0x1ffff, p2m_frames 256
> > 2015-09-03 12:29:45 BST xc: detail: max_mfn 0x120000
> > 2015-09-03 12:29:46 BST xc: error: Failed to write page data to stream 
> > (104 = Connection reset by peer): Internal error
> > 2015-09-03 12:29:46 BST xc: error: Save failed (104 = Connection reset 
> > by peer): Internal error
> > 2015-09-03 12:29:46 BST libxl-save-helper: debug: complete r=-1: 
> > Connection reset by peer
> > 2015-09-03 12:29:46 BST libxl: error: 
> > libxl_stream_write.c:329:libxl__xc_domain_save_done: saving domain: 
> > domain did not respond to suspend request: Connection reset by peer
> > 2015-09-03 12:29:46 BST libxl: debug: 
> > libxl_event.c:1874:libxl__ao_complete: ao 0x7f67b3f63e90: complete, rc=
> > -8
> > 2015-09-03 12:29:46 BST libxl: debug: 
> > libxl_event.c:1843:libxl__ao__destroy: ao 0x7f67b3f63e90: destroy
> > 2015-09-03 12:29:46 BST libxl: debug: libxl.c:526:libxl_domain_resume: 
> > ao 0x7f67b3fa44b0: create: how=(nil) callback=(nil) 
> > poller=0x7f67a0002610
> > 2015-09-03 12:29:46 BST xc: error: Dom 3 not suspended: (shutdown 0, 
> > reason 255): Internal error
> > 2015-09-03 12:29:46 BST libxl: error: 
> > libxl_dom_suspend.c:409:libxl__domain_resume: xc_domain_resume failed 
> > for domain 3: Invalid argument
> > 2015-09-03 12:29:46 BST libxl: debug: 
> > libxl_event.c:1874:libxl__ao_complete: ao 0x7f67b3fa44b0: complete, rc=
> > -3
> > 2015-09-03 12:29:46 BST libxl: debug: libxl.c:529:libxl_domain_resume: 
> > ao 0x7f67b3fa44b0: inprogress: poller=0x7f67a0002610, flags=ic
> > 2015-09-03 12:29:46 BST libxl: debug: 
> > libxl_event.c:1843:libxl__ao__destroy: ao 0x7f67b3fa44b0: destroy
> > 
> > While the receiver has:
> > 
> > 2015-09-03 12:29:45 BST libxl-save-helper: debug: starting restore: 
> > Success
> > 2015-09-03 12:29:45 BST xc: detail: fd 31, dom 4, hvm 0, pae 0, 
> > superpages 0, checkpointed_stream 0
> > 2015-09-03 12:29:45 BST xc: info: Found x86 PV domain from Xen 4.6
> > 2015-09-03 12:29:45 BST xc: info: Restoring domain
> > 2015-09-03 12:29:45 BST xc: detail: 64 bits, 4 levels
> > 2015-09-03 12:29:45 BST xc: detail: max_mfn 0x120000
> > 2015-09-03 12:29:45 BST xc: detail: Expanded p2m from 0 to 0x1ffff
> > 2015-09-03 12:29:45 BST xc: error: Failed to read 4202504 bytes of data 
> > for record (0x00000001, Page data) (11 = Resource temporarily 
> > unavailabl): Internal error
> > 2015-09-03 12:29:45 BST xc: error: Restore failed (11 = Resource 
> > temporarily unavailabl): Internal error
> > 2015-09-03 12:29:45 BST libxl-save-helper: debug: complete r=-1: 
> > Resource temporarily unavailable
> > 2015-09-03 12:29:45 BST libxl: error: 
> > libxl_stream_read.c:749:libxl__xc_domain_restore_done: restoring 
> > domain: Resource temporarily unavailable
> > 2015-09-03 12:29:45 BST libxl: error: 
> > libxl_create.c:1141:domcreate_rebuild_done: cannot (re-)build domain: 
> > -3
> > 2015-09-03 12:29:46 BST libxl: debug: libxl.c:1708:devices_destroy_cb: 
> > forked pid 18738 for destroy of domain 4
> > 2015-09-03 12:29:46 BST libxl: debug: 
> > libxl_event.c:1874:libxl__ao_complete: ao 0x7fbb7687e900: complete, rc=
> > -3
> > 2015-09-03 12:29:46 BST libxl: debug: 
> > libxl_event.c:1843:libxl__ao__destroy: ao 0x7fbb7687e900: destroy
> > 
> > 
> > "xc: error: Failed to write page data to stream (104 = Connection reset 
> > by
> > peer): Internal error" seems to be the initial failure.
> 
> I wonder if this has anything to do with migration V2?

That would be my first guess.

>  I noticed a migration 
> regression a few days back, but later realized that the sender was 4.5 and 
> receiver was 4.6. I planned to see if migration worked through libvirt 
> between 
> two 4.6 hosts, but before doing so I had to re-purpose the machines for 
> another 
> task.

> I think libvirt needs some work to accommodate migration V2...

If so then I think that would be a bug in libxl, since it is supposed to be
backward compatible at the libxl API level.

(It may also be true that libvirt might like updates to work _better_ with
migration v2)

Ian.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel