[Xen-devel] [PULL 2/5] xen/pass-through: ROM BAR handling adjustments

[Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>]

From: Jan Beulich <JBeulich@xxxxxxxx>

Expecting the ROM BAR to be written with an all ones value when sizing
the region is wrong - the low bit has another meaning (enable/disable)
and bits 1..10 are reserved. The PCI spec also mandates writing all
ones to just the address portion of the register.

Use suitable constants also for initializing the ROM BAR register field
description.

Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
---
 hw/xen/xen_pt.c             |   16 ++++++++++++----
 hw/xen/xen_pt_config_init.c |    4 ++--
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c
index 8d47a45..7b8a31e 100644
--- a/hw/xen/xen_pt.c
+++ b/hw/xen/xen_pt.c
@@ -249,10 +249,18 @@ static void xen_pt_pci_write_config(PCIDevice *d, 
uint32_t addr,
 
     /* check unused BAR register */
     index = xen_pt_bar_offset_to_index(addr);
-    if ((index >= 0) && (val > 0 && val < XEN_PT_BAR_ALLF) &&
-        (s->bases[index].bar_flag == XEN_PT_BAR_FLAG_UNUSED)) {
-        XEN_PT_WARN(d, "Guest attempt to set address to unused Base Address "
-                    "Register. (addr: 0x%02x, len: %d)\n", addr, len);
+    if ((index >= 0) && (val != 0)) {
+        uint32_t chk = val;
+
+        if (index == PCI_ROM_SLOT)
+            chk |= (uint32_t)~PCI_ROM_ADDRESS_MASK;
+
+        if ((chk != XEN_PT_BAR_ALLF) &&
+            (s->bases[index].bar_flag == XEN_PT_BAR_FLAG_UNUSED)) {
+            XEN_PT_WARN(d, "Guest attempt to set address to unused "
+                        "Base Address Register. (addr: 0x%02x, len: %d)\n",
+                        addr, len);
+        }
     }
 
     /* find register group entry */
diff --git a/hw/xen/xen_pt_config_init.c b/hw/xen/xen_pt_config_init.c
index f3cf069..f373092 100644
--- a/hw/xen/xen_pt_config_init.c
+++ b/hw/xen/xen_pt_config_init.c
@@ -729,8 +729,8 @@ static XenPTRegInfo xen_pt_emu_reg_header0[] = {
         .offset     = PCI_ROM_ADDRESS,
         .size       = 4,
         .init_val   = 0x00000000,
-        .ro_mask    = 0x000007FE,
-        .emu_mask   = 0xFFFFF800,
+        .ro_mask    = ~PCI_ROM_ADDRESS_MASK & ~PCI_ROM_ADDRESS_ENABLE,
+        .emu_mask   = (uint32_t)PCI_ROM_ADDRESS_MASK,
         .init       = xen_pt_bar_reg_init,
         .u.dw.read  = xen_pt_long_reg_read,
         .u.dw.write = xen_pt_exp_rom_bar_reg_write,
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel