[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [RFC v2 00/15] Add VT-d Posted-Interrupts support



>>> On 18.05.15 at 12:22, <feng.wu@xxxxxxxxx> wrote:

> 
>> -----Original Message-----
>> From: Tian, Kevin
>> Sent: Monday, May 18, 2015 1:33 PM
>> To: Wu, Feng; xen-devel@xxxxxxxxxxxxx 
>> Cc: keir@xxxxxxx; jbeulich@xxxxxxxx; andrew.cooper3@xxxxxxxxxx; Zhang,
>> Yang Z; george.dunlap@xxxxxxxxxxxxx 
>> Subject: RE: [RFC v2 00/15] Add VT-d Posted-Interrupts support
>> 
>> > From: Wu, Feng
>> > Sent: Friday, May 08, 2015 5:07 PM
>> >
>> > VT-d Posted-Interrupts is an enhancement to CPU side Posted-Interrupt.
>> > With VT-d Posted-Interrupts enabled, external interrupts from
>> > direct-assigned devices can be delivered to guests without VMM
>> > intervention when guest is running in non-root mode.
>> >
>> > You can find the VT-d Posted-Interrtups Spec. in the following URL:
>> >
>> http://www.intel.com/content/www/us/en/intelligent-systems/intel-technolog 
>> > y/vt-directed-io-spec.html
>> >
>> > This patch set follow the following design:
>> > http://article.gmane.org/gmane.comp.emulators.xen.devel/236476 
>> >
>> > v1 -> v2
>> > 1. Add the design doc.
>> > 2. Coding style fix.
>> > 3. Add some comments for struct pi_desc.
>> > 4. Extend 'struct iremap_entry' to a more common format.
>> > 5. Delete the atomic helper functions for pi descriptor manipulation.
>> > 6. Add the new command line in docs/misc/xen-command-line.markdown.
>> > 7. Use macros to replace some magic numbers.
>> 
>> Though generally this version looks good to me, it'd be clearer if you could
>> give v1->v2 information per patch to help review. :-)
> 
> Good suggestion, Kevin! And here it is:

That's better, but (for the future) still not the format we'd like it to be
in: These notes should go into the individual patches, after the first
delimiting --- marker.

Jan

> [RFC v2 01/15] Vt-d Posted-intterrupt (PI) design 
> Add the design doc.
> 
> [RFC v2 04/15] vmx: Extend struct pi_desc to support VT-d Posted-Interrupts 
> Add some comments for struct pi_desc.
> 
> [RFC v2 05/15] vmx: Initialize VT-d Posted-Interrupts Descriptor
> 1. if ( iommu_intpost == 1 ) --> if ( iommu_intpost )
> 2. Don't need to clear SN and NDM fileds in pi_desc_init(), since it was 
> clear to zero when initialized
> 3. Use macro "MASK_INSR" for "(dest << 8) & 0xFF00" in pi_desc_init()
> 
> [RFC v2 06/15] vt-d: Extend struct iremap_entry to support VT-d 
> Posted-Interrupts
> Extend 'struct iremap_entry' to a more common format.
> 1. Hide bit manipulation of IRTE inside a static inline function.
> 2. Define a new macro "PDA_MASK" to manipulate IRTE
> 3. Make the error message more informative.
> 
> [RFC v2 08/15] Update IRTE according to guest interrupt config changes
> 1. Check the result when dest_vcpu_array is allocated.
> 2. Use interrupt remapping when we encounter failures during interrupts 
> setup/update for PI.
> 
> [RFC v2 10/15] vmx: Define two per-cpu variables
> 1. block_vcpu_on_cpu --> blocked_vcpu.
> 2. blocked_vcpu_lock _on_cpu --> blocked_vcpu_lock.
> 
> [RFC v2 11/15] vmx: Add a global wake-up vector for VT-d Posted-Interrupts
> Adjust the initialization of "vmx_function_table.pi_desc_update"
> 
> [RFC v2 12/15] vmx: Properly handle notification event when vCPU is running
> Add detailed description about the scenario in which the changes in this 
> patch is used.
> 
> [RFC v2 13/15] Update Posted-Interrupts Descriptor during vCPU scheduling
> Properly remove the vcpu from the blocked list when 'ON' field is set during 
> vCPU is being blocked.
> 
> [RFC v2 15/15] Add a command line parameter for VT-d posted-interrupts
> Add the new command line in docs/misc/xen-command-line.markdown.
> 
> Thanks,
> Feng
> 
>> 
>> Thanks
>> Kevin




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.