[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH 1/2] iommu VT-d: separate rmrr addition function



On Wed, Mar 11, 2015 at 10:29:54AM +0000, Jan Beulich wrote:
> >>> On 09.03.15 at 15:42, <elena.ufimtseva@xxxxxxxxxx> wrote:
> > --- a/xen/drivers/passthrough/vtd/dmar.c
> > +++ b/xen/drivers/passthrough/vtd/dmar.c
> > @@ -567,6 +567,66 @@ out:
> >      return ret;
> >  }
> >  
> > +int register_one_rmrr(struct acpi_rmrr_unit *rmrru)
> 
> static - I don't see why the command line processing in patch 2 can't
> be put in this file.

I wanted to keep it close to iommu command line parser in iommu.c.
Andrew mentioned that the parser should be defined as custom_param.
Did you mean that as well and that it should be moved to dmar.c?

> 
> > +{
> > +    u8 b, d, f;
> > +    bool_t ignore = 0;
> > +    unsigned int i = 0;
> > +    int ret = 0;
> > +
> > +    /* Skip checking if segment is not accessible yet. */
> > +    if ( !pci_known_segment(rmrru->segment) )
> > +        i = UINT_MAX;
> > +
> > +    for ( ; i < rmrru->scope.devices_cnt; i++ )
> > +    {
> > +        b = PCI_BUS(rmrru->scope.devices[i]);
> > +        d = PCI_SLOT(rmrru->scope.devices[i]);
> > +        f = PCI_FUNC(rmrru->scope.devices[i]);
> 
> Please make this the declarations (with initializers) of these variables;
> they don't appear to be used outside this scope.
> 
> > +
> > +        if ( pci_device_detect(rmrru->segment, b, d, f) == 0 )
> > +        {
> > +            dprintk(XENLOG_WARNING VTDPREFIX,
> > +                    " Non-existent device (%04x:%02x:%02x.%u) is reported"
> > +                    " in RMRR (%"PRIx64", %"PRIx64")'s scope!\n",
> > +                    rmrru->segment, b, d, f,
> > +                    rmrru->base_address, rmrru->end_address);
> > +            ignore = 1;
> > +        }
> > +        else
> > +        {
> > +            ignore = 0;
> > +            break;
> > +        }
> > +    }
> > +
> > +    if ( ignore )
> > +    {
> > +        dprintk(XENLOG_WARNING VTDPREFIX,
> > +            "  Ignore the RMRR (%"PRIx64", %"PRIx64") due to "
> > +            "devices under its scope are not PCI discoverable!\n",
> > +            rmrru->base_address, rmrru->end_address);
> > +        ret = -EFAULT;
> > +    }
> > +    else if ( rmrru->base_address > rmrru->end_address )
> > +    {
> > +        dprintk(XENLOG_WARNING VTDPREFIX,
> > +            "  The RMRR (%"PRIx64", %"PRIx64") is incorrect!\n",
> > +            rmrru->base_address, rmrru->end_address);
> > +        ret = -EFAULT;
> > +    }
> > +    else
> > +    {
> > +        if ( iommu_verbose )
> > +            dprintk(VTDPREFIX,
> > +                    "  RMRR region: base_addr %"PRIx64
> > +                    " end_address %"PRIx64"\n",
> > +                    rmrru->base_address, rmrru->end_address);
> > +        acpi_register_rmrr_unit(rmrru);
> > +    }
> > +    return ret;
> 
> Blank line before return please.
> 
> > @@ -618,66 +678,14 @@ acpi_parse_one_rmrr(struct acpi_dmar_header *header)
> >                                 &rmrru->scope, RMRR_TYPE, rmrr->segment);
> >  
> >      if ( ret || (rmrru->scope.devices_cnt == 0) )
> > -        xfree(rmrru);
> > -    else
> >      {
> > -        u8 b, d, f;
> > -        bool_t ignore = 0;
> > -        unsigned int i = 0;
> > -
> > -        /* Skip checking if segment is not accessible yet. */
> > -        if ( !pci_known_segment(rmrr->segment) )
> > -            i = UINT_MAX;
> > -
> > -        for ( ; i < rmrru->scope.devices_cnt; i++ )
> > -        {
> > -            b = PCI_BUS(rmrru->scope.devices[i]);
> > -            d = PCI_SLOT(rmrru->scope.devices[i]);
> > -            f = PCI_FUNC(rmrru->scope.devices[i]);
> > -
> > -            if ( pci_device_detect(rmrr->segment, b, d, f) == 0 )
> > -            {
> > -                dprintk(XENLOG_WARNING VTDPREFIX,
> > -                        " Non-existent device (%04x:%02x:%02x.%u) is 
> > reported"
> > -                        " in RMRR (%"PRIx64", %"PRIx64")'s scope!\n",
> > -                        rmrr->segment, b, d, f,
> > -                        rmrru->base_address, rmrru->end_address);
> > -                ignore = 1;
> > -            }
> > -            else
> > -            {
> > -                ignore = 0;
> > -                break;
> > -            }
> > -        }
> > -
> > -        if ( ignore )
> > -        {
> > -            dprintk(XENLOG_WARNING VTDPREFIX,
> > -                "  Ignore the RMRR (%"PRIx64", %"PRIx64") due to "
> > -                "devices under its scope are not PCI discoverable!\n",
> > -                rmrru->base_address, rmrru->end_address);
> > -            xfree(rmrru);
> > -        }
> > -        else if ( base_addr > end_addr )
> > -        {
> > -            dprintk(XENLOG_WARNING VTDPREFIX,
> > -                "  The RMRR (%"PRIx64", %"PRIx64") is incorrect!\n",
> > -                rmrru->base_address, rmrru->end_address);
> > -            xfree(rmrru);
> > -            ret = -EFAULT;
> > -        }
> > -        else
> > -        {
> > -            if ( iommu_verbose )
> > -                dprintk(VTDPREFIX,
> > -                        "  RMRR region: base_addr %"PRIx64
> > -                        " end_address %"PRIx64"\n",
> > -                        rmrru->base_address, rmrru->end_address);
> > -            acpi_register_rmrr_unit(rmrru);
> > -        }
> > +        xfree(rmrru);
> > +        return ret;
> >      }
> >  
> > +    ret = register_one_rmrr(rmrru);
> > +    if ( ret )
> > +        xfree(rmrru);
> >      return ret;
> 
> Please try to make this a single xfree() and a single return (with
> again a blank line preceding it).

Got it, I will make changes you mentioned.
> 
> Jan

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.