[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [OSSTEST PATCH 2/4] Build XEN and HVM Dom0 kernel for L1 guest VM

On Tue, 2015-01-27 at 08:33 +0000, Hu, Robert wrote:
[...] please trim quotes.
> > 
> > FWIW, OSSTest has a bunch of overlay files (look at overlay directory),
> > which includes an init script called xenbridge. In theory if you're
> > reusing this script (ts-xen-install) then you don't need to worry about
> > setting up bridge?
> I tried this approach, using xenbridge init scripts, it can work.
> However, in original xen install, it seems not used. I don't see 'xenbridge'
> in /etc/rc2.d/

xenbridge is only enabled if OldSeparateBridgeInitd is set, which it is
not for a modern Xen install so I think this is a red-herring.

> Shall I know the xenbr0 is created? I think not by xenbridge init service.

The host networking is configured by the function nodhcp in

Per our previous conversations once the L1 guest is installed you can
mostly treat it as a if it were an L0 host wrt configuring it. In other
words there should be no need for a separate setup_l1_bridge function,
just some minor modifications to ts-xen-install.


Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.