[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v1 1/3] xen/arm: Add R-Car Gen2 support for early printk



Hi all.

Let me explain.

The Renesas R-Car Gen2 is a family of SoCs (R-Car H2, M2, etc.).
The "Lager" is a name of development board based on R-Car H2 SoC.
The UART IP block named SCIF (Serial Communication Interface with FIFO)
is common for all SoCs in R-Car Gen2 family.


On Fri, Jan 16, 2015 at 3:08 PM, Ian Campbell <Ian.Campbell@xxxxxxxxxx> wrote:
On Fri, 2015-01-16 at 13:05 +0000, Julien Grall wrote:
> Hello Iurii,
>
> Thanks for adding the support of a new board in Xen.
>
> On 16/01/15 12:50, Iurii Konovalenko wrote:
> > diff --git a/xen/include/asm-arm/rcar2-uart.h b/xen/include/asm-arm/rcar2-uart.h
> > new file mode 100644
> > index 0000000..10a56fb
> > --- /dev/null
> > +++ b/xen/include/asm-arm/rcar2-uart.h
>
> [..]
>
> > +#ifndef __ASM_ARM_RCAR2_H
> > +#define __ASM_ARM_RCAR2_H
>
> According to the name of the guard should be called __ASM_ARM_RCAR2_UART_H

Is RCAR2 the name of the board, the soc or the name of uart IP block?

I'd prefer the naming (here and for the main driver) to be as far to the
right of that list as possible.

Ian.




--

Oleksandr Tyshchenko | Embedded Dev
GlobalLogic
www.globallogic.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.