[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] dom0 as pvh boot problem

>>> Elena Ufimtseva <ufimtseva@xxxxxxxxx> 01/02/15 7:32 PM >>>
>The last successful command is the reading status register of second IOMMU
><snip from iommu_enable_translation() in
>746:    sts = dmar_readl(iommu->reg, DMAR_GSTS_REG);
>747:    dmar_writel(iommu->reg, DMAR_GCMD_REG, sts | DMA_GCMD_TE);
>After dmar_writel for second iommu the machine hangs.

That's rather odd - you say it doesn't even reach the IOMMU_WAIT_OP()
right after that? That would suggest a fault or other abnormal condition
raised by the translation enabling (i.e. some problem with the page tables,
albeit that should then have been a problem for the first IOMMU already).
Yet an eventual fault can't be delivered at that point due to interrupts being
disabled. Perhaps the VT-d maintainers (now Cc-ed) have some suggestion
as to what's going on or how to diagnose.


Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.