[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [RFC PATCH 04/13] cpufreq: use turbo settings only for x86 architecture



This settings is x86-specific and should not be used for
other architectures.

Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx>
---
 xen/drivers/cpufreq/utility.c | 11 ++++++++++-
 xen/drivers/pm/pmstat.c       |  6 ++++++
 xen/include/cpufreq/cpufreq.h |  6 ++++++
 3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/xen/drivers/cpufreq/utility.c b/xen/drivers/cpufreq/utility.c
index c9150a1..d01c768 100644
--- a/xen/drivers/cpufreq/utility.c
+++ b/xen/drivers/cpufreq/utility.c
@@ -209,7 +209,9 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy 
*policy,
 {
     unsigned int min_freq = ~0;
     unsigned int max_freq = 0;
+#ifdef CONFIG_X86
     unsigned int second_max_freq = 0;
+#endif
     unsigned int i;
 
     for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
@@ -221,6 +223,7 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy 
*policy,
         if (freq > max_freq)
             max_freq = freq;
     }
+#ifdef CONFIG_X86
     for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
         unsigned int freq = table[i].frequency;
         if (freq == CPUFREQ_ENTRY_INVALID || freq == max_freq)
@@ -234,9 +237,13 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy 
*policy,
         printk("max_freq: %u    second_max_freq: %u\n",
                max_freq, second_max_freq);
 
+    policy->cpuinfo.second_max_freq = second_max_freq;
+#else
+    if (cpufreq_verbose)
+        printk("max_freq: %u\n", max_freq);
+#endif
     policy->min = policy->cpuinfo.min_freq = min_freq;
     policy->max = policy->cpuinfo.max_freq = max_freq;
-    policy->cpuinfo.second_max_freq = second_max_freq;
 
     if (policy->min == ~0)
         return -EINVAL;
@@ -390,6 +397,7 @@ int cpufreq_driver_getavg(unsigned int cpu, unsigned int 
flag)
     return policy->cur;
 }
 
+#ifdef CONFIG_X86
 int cpufreq_update_turbo(int cpuid, int new_state)
 {
     struct cpufreq_policy *policy;
@@ -430,6 +438,7 @@ int cpufreq_get_turbo_status(int cpuid)
     policy = per_cpu(cpufreq_cpu_policy, cpuid);
     return policy && policy->turbo == CPUFREQ_TURBO_ENABLED;
 }
+#endif /* CONFIG_X86 */
 
 /*********************************************************************
  *                 POLICY                                            *
diff --git a/xen/drivers/pm/pmstat.c b/xen/drivers/pm/pmstat.c
index bd6ca43..fff3609 100644
--- a/xen/drivers/pm/pmstat.c
+++ b/xen/drivers/pm/pmstat.c
@@ -292,7 +292,11 @@ static int get_cpufreq_para(struct xen_sysctl_pm_op *op)
             &op->u.get_para.u.ondemand.sampling_rate,
             &op->u.get_para.u.ondemand.up_threshold);
     }
+#ifdef CONFIG_X86
     op->u.get_para.turbo_enabled = cpufreq_get_turbo_status(op->cpuid);
+#else
+    op->u.get_para.turbo_enabled = 0;
+#endif
 
     return ret;
 }
@@ -475,6 +479,7 @@ int do_pm_op(struct xen_sysctl_pm_op *op)
         break;
     }
 
+#ifdef CONFIG_X86
     case XEN_SYSCTL_pm_op_enable_turbo:
     {
         ret = cpufreq_update_turbo(op->cpuid, CPUFREQ_TURBO_ENABLED);
@@ -486,6 +491,7 @@ int do_pm_op(struct xen_sysctl_pm_op *op)
         ret = cpufreq_update_turbo(op->cpuid, CPUFREQ_TURBO_DISABLED);
         break;
     }
+#endif /* CONFIG_X86 */
 
     default:
         printk("not defined sub-hypercall @ do_pm_op\n");
diff --git a/xen/include/cpufreq/cpufreq.h b/xen/include/cpufreq/cpufreq.h
index dde7259..88ada16 100644
--- a/xen/include/cpufreq/cpufreq.h
+++ b/xen/include/cpufreq/cpufreq.h
@@ -39,7 +39,9 @@ extern struct acpi_cpufreq_data *cpufreq_drv_data[NR_CPUS];
 
 struct cpufreq_cpuinfo {
     unsigned int        max_freq;
+#ifdef CONFIG_X86
     unsigned int        second_max_freq;    /* P1 if Turbo Mode is on */
+#endif
     unsigned int        min_freq;
     unsigned int        transition_latency; /* in 10^(-9) s = nanoseconds */
 };
@@ -59,10 +61,12 @@ struct cpufreq_policy {
 
     bool_t              resume; /* flag for cpufreq 1st run
                                  * S3 wakeup, hotplug cpu, etc */
+#ifdef CONFIG_X86
     s8                  turbo;  /* tristate flag: 0 for unsupported
                                  * -1 for disable, 1 for enabled
                                  * See CPUFREQ_TURBO_* below for defines */
     bool_t              aperf_mperf; /* CPU has APERF/MPERF MSRs */
+#endif
 };
 DECLARE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_policy);
 
@@ -127,8 +131,10 @@ extern int cpufreq_driver_getavg(unsigned int cpu, 
unsigned int flag);
 #define CPUFREQ_TURBO_UNSUPPORTED   0
 #define CPUFREQ_TURBO_ENABLED       1
 
+#ifdef CONFIG_X86
 extern int cpufreq_update_turbo(int cpuid, int new_state);
 extern int cpufreq_get_turbo_status(int cpuid);
+#endif
 
 static __inline__ int 
 __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.