[Xen-devel] [PATCH V2 0/4] Add Broadcom 7445D0 A15 board support

[Jon Fraser <jfraser@xxxxxxxxxxxx>]

Version 2

This patch series adds support for the Broadcom A15 boards based on the
7445D0 SoC. These changes only affect this single platform.

The existing code for .init.proc.info  and early UART support have been updated
from chip version C0 to D0.  Versions before D0 are not supported.

I believe I've addressed all of Julien's comments on brcm.c in the previous 
version.

Jon Fraser (4):
  xen/arm: Broadcom 7445D0 ARM cpu support.
  xen/arm: Update early print console UART address for Broadcom 7445D0.
  xen/arm: Add support for Broadcom 7445D0 A15 platform.
  xen/arm/docs:  Document Broadcom 7445D0 early printk support

 docs/misc/arm/early-printk.txt  |   1 +
 xen/arch/arm/Rules.mk           |   2 +-
 xen/arch/arm/arm32/proc-v7.S    |   4 +-
 xen/arch/arm/platforms/Makefile |   1 +
 xen/arch/arm/platforms/brcm.c   | 294 ++++++++++++++++++++++++++++++++++++++++
 5 files changed, 299 insertions(+), 3 deletions(-)
 create mode 100644 xen/arch/arm/platforms/brcm.c

-- 
1.9.0.138.g2de3478


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel