[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Panic on Seattle (resend)





On 09/30/2014 05:45 AM, Ian Campbell wrote:
On Tue, 2014-09-30 at 02:43 -0500, Suravee Suthikulpanit wrote:
Hi All,

I have been trying to boot the latest Xen code on Seattle (while I am
getting the patch ready to be sent out), and I ran into the following issue.

.....
(XEN) Brought up 6 CPUs
(XEN) CPU 5 booted.
(XEN) P2M: 44-bit IPA with 44-bit PA
(XEN) P2M: 4 levels with order-0 root, VTCR 0x80043594
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 0000008008800000
(XEN) elf_init: not an ELF binary
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Could not set up DOM0 guest OS
(XEN) ****************************************
(XEN)
(XEN) Manual reset required ('noreboot' specified)

I have not tracked down to a particular commit ID. But do you guys see
anything suspicious with the error message?

The elf_init thing is suspicious, it suggests Xen hasn't properly
figured out the type of your kernel image. Is it a regular bare arm64
Image (from arch/arm64/boot/Image)? You can't boot the vmlinux from the
top level directly (AFAIK).

Actually, I bisect it down to this commit ID causing it to break:

commit 73b9bdfd2adab8ed0cea91d3e4470b0d1bf76591
Author: Vijaya Kumar K <Vijaya.Kumar@xxxxxxxxxxxxxxxxxx>
Date:   Fri Sep 12 16:39:46 2014 +0530

    xen/arm: Add virtual GICv3 support

I am not sure at this point why. Here is the full Xen log.

Loading Xen image..
- UART enabled -
- CPU 00000000 booting -
- Current EL 00000008 -
- Xen starting at EL2 -
- Zero BSS -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) Checking for initrd in /chosen
(XEN) RAM: 0000008000000000 - 00000083ffffffff
(XEN)
(XEN) MODULE[0]: 000000801fffe000 - 000000801ffffc7d Device Tree
(XEN) MODULE[1]: 0000008008800000 - 0000008009100890 Kernel
(XEN)
(XEN) Command line: console=dtuart dtuart=serial0 noreboot sync_console
(XEN) Placing Xen at 0x00000083ffe00000-0x0000008400000000
(XEN) Update BOOTMOD_XEN from 0000008008700000-0000008008802d81 => 00000083ffe00000-00000083fff02d81
(XEN) Domain heap initialised
(XEN) Looking for UART console serial0
 Xen 4.5-unstable
(XEN) Xen version 4.5-unstable (ssuthiku@) (aarch64-linux-gnu-gcc (crosstool-NG linaro-1.13.1-4.8-2014.01 - Linaro GCC 2013.11) 4.8.3 20140106 (prerelease)) debug=y Tue Sep 30 09:41:14 CDT 2014
(XEN) Latest ChangeSet: Mon Aug 25 22:31:06 2014 -0500 git:ecf3789-dirty
(XEN) Console output is synchronous.
(XEN) Processor: 410fd070: "ARM Limited", variant: 0x0, part 0xd07, rev 0x0
(XEN) 64-bit Execution:
(XEN)   Processor Features: 0000000000002222 0000000000000000
(XEN)     Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
(XEN)     Extensions: FloatingPoint AdvancedSIMD
(XEN)   Debug Features: 0000000010305106 0000000000000000
(XEN)   Auxiliary Features: 0000000000000000 0000000000000000
(XEN)   Memory Model Features: 0000000000001124 0000000000000000
(XEN)   ISA Features:  0000000000011120 0000000000000000
(XEN) 32-bit Execution:
(XEN)   Processor Features: 00000131:00011011
(XEN)     Instruction Sets: AArch32 Thumb Thumb-2 Jazelle
(XEN)     Extensions: GenericTimer Security
(XEN)   Debug Features: 03010066
(XEN)   Auxiliary Features: 00000000
(XEN)   Memory Model Features: 10101105 40000000 01260000 02102211
(XEN)  ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
(XEN) Platform: SEATTLE
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27
(XEN) Using generic timer at 187500 KHz
(XEN) GICv2 initialization:
(XEN)         gic_dist_addr=00000000e1110000
(XEN)         gic_cpu_addr=00000000e112f000
(XEN)         gic_hyp_addr=00000000e1140000
(XEN)         gic_vcpu_addr=00000000e1160000
(XEN)         gic_maintenance_irq=24
(XEN) GICv2: 448 lines, 8 cpus, secure (IID 0200143b).
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) I/O virtualisation disabled
(XEN) Allocated console ring of 64 KiB.
(XEN) Bringing up CPU1
- CPU 00000201 booting -
- Current EL 00000008 -
- Xen starting at EL2 -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
- CPU 00000200 booting -
- Current EL 00000008 -
- Xen starting at EL2 -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
- CPU 00000101 booting -
- Current EL 00000008 -
- Xen starting at EL2 -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) CPU 3 booted.
(XEN) Bringing up CPU4
- CPU 00000100 booting -
- Current EL 00000008 -
- Xen starting at EL2 -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) CPU 4 booted.
(XEN) Bringing up CPU5
- CPU 00000001 booting -
- Current EL 00000008 -
- Xen starting at EL2 -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) Brought up 6 CPUs
(XEN) CPU 5 booted.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 0000008008800000
(XEN) elf_init: not an ELF binary
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Could not set up DOM0 guest OS
(XEN) ****************************************
(XEN)
(XEN) Manual reset required ('noreboot' specified)

Suravee

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.