[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [RFC 16/19] libxl/arm: Introduce DT_IRQ_TYPE_*



On Mon, 2014-06-16 at 17:18 +0100, Julien Grall wrote:
> Avoid to use hardcode value when the interrupt type is set.
> 
> Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
> Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
> Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> Cc: Ian Campbell <ian.campbell@xxxxxxxxxx>

Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>

> ---
>  tools/libxl/libxl_arm.c |   29 +++++++++++++++++++++++++----
>  1 file changed, 25 insertions(+), 4 deletions(-)
> 
> diff --git a/tools/libxl/libxl_arm.c b/tools/libxl/libxl_arm.c
> index 21c3399..1edb87a 100644
> --- a/tools/libxl/libxl_arm.c
> +++ b/tools/libxl/libxl_arm.c
> @@ -6,6 +6,23 @@
>  #include <libfdt.h>
>  #include <assert.h>
>  
> +/**
> + * IRQ line type.
> + * DT_IRQ_TYPE_NONE            - default, unspecified type
> + * DT_IRQ_TYPE_EDGE_RISING     - rising edge triggered
> + * DT_IRQ_TYPE_EDGE_FALLING    - falling edge triggered
> + * DT_IRQ_TYPE_EDGE_BOTH       - rising and falling edge triggered
> + * DT_IRQ_TYPE_LEVEL_HIGH      - high level triggered
> + * DT_IRQ_TYPE_LEVEL_LOW       - low level triggered
> + */
> +#define DT_IRQ_TYPE_NONE           0x00000000
> +#define DT_IRQ_TYPE_EDGE_RISING    0x00000001
> +#define DT_IRQ_TYPE_EDGE_FALLING   0x00000002
> +#define DT_IRQ_TYPE_EDGE_BOTH                           \
> +    (DT_IRQ_TYPE_EDGE_FALLING | DT_IRQ_TYPE_EDGE_RISING)
> +#define DT_IRQ_TYPE_LEVEL_HIGH     0x00000004
> +#define DT_IRQ_TYPE_LEVEL_LOW      0x00000008
> +
>  int libxl__arch_domain_create(libxl__gc *gc, libxl_domain_config *d_config,
>                                uint32_t domid)
>  {
> @@ -338,9 +355,12 @@ static int make_timer_node(libxl__gc *gc, void *fdt, 
> const struct arch_info *ain
>      res = fdt_property_compat(gc, fdt, 1, ainfo->timer_compat);
>      if (res) return res;
>  
> -    set_interrupt_ppi(ints[0], GUEST_TIMER_PHYS_S_PPI, 0xf, 0x8);
> -    set_interrupt_ppi(ints[1], GUEST_TIMER_PHYS_NS_PPI, 0xf, 0x8);
> -    set_interrupt_ppi(ints[2], GUEST_TIMER_VIRT_PPI, 0xf, 0x8);
> +    set_interrupt_ppi(ints[0], GUEST_TIMER_PHYS_S_PPI, 0xf,
> +                      DT_IRQ_TYPE_LEVEL_LOW);
> +    set_interrupt_ppi(ints[1], GUEST_TIMER_PHYS_NS_PPI, 0xf,
> +                      DT_IRQ_TYPE_LEVEL_LOW);
> +    set_interrupt_ppi(ints[2], GUEST_TIMER_VIRT_PPI, 0xf,
> +                      DT_IRQ_TYPE_LEVEL_LOW);
>  
>      res = fdt_property_interrupts(gc, fdt, ints, 3);
>      if (res) return res;
> @@ -378,7 +398,8 @@ static int make_hypervisor_node(libxl__gc *gc, void *fdt,
>       *  - Active-low level-sensitive
>       *  - All cpus
>       */
> -    set_interrupt_ppi(intr, GUEST_EVTCHN_PPI, 0xf, 0x8);
> +    set_interrupt_ppi(intr, GUEST_EVTCHN_PPI, 0xf,
> +                      DT_IRQ_TYPE_LEVEL_LOW);
>  
>      res = fdt_property_interrupts(gc, fdt, &intr, 1);
>      if (res) return res;



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.