[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v10 0/5] Remus netbuffer: Network buffering support



On 06/05/2014 06:47 PM, George Dunlap wrote:
On Thu, Jun 5, 2014 at 2:34 AM, Yang Hongyang <yanghy@xxxxxxxxxxxxxx> wrote:
This patch series adds support for network buffering in the Remus
codebase in libxl.

Hongyang,

This is a resend of the series you sent May 21, right?

When you resend a patch series, you can add RESEND to the title (e.g.,
[PATCH v10 RESEND 0/5]) to highlight the fact that it hasn't received
any attention.

Hi George, thanks for the comment, it's a Rebased patch, and yes it's
the same patch series as the series sent May 21, will pay attention on
the subject in the following series.


  -George


This is a rebased version of v10 series.The first patch was applied,
but can not found on current master, if it's not necessary, please
let me know.

the code is also hosted on github:

url: https://github.com/laijs/xen
branch: remus-0605

Changes V10:
   Restructured the whole patch series.
   Introduce the remus device abstract layer.
   Make remus checkpoint asynchronous.

Changes in V9:
   Use async exec script api to exec scripts.

Changes in V8:
   Applied some comments(by IanJ).
   Merge some struct definitions to it's implementation.
   (2/3/5 in V7 => 3 in V8)

Changes in V7:
   Applied missing comments(by IanJ).
   Applied Shriram comments.

   merge netbufering tangled setup/teardown code into one patch.
   (2/6/8 in V6 => 5 in V7. 9/10 in V6 => 7 in V7)

Changes in V6:
   Applied Ian Jackson's comments of V5 series.
   the [PATCH 2/4 V5] is split by small functionalities.

   [PATCH 4/4 V5] --> [PATCH 13/13] netbuffer is default enabled.

Changes in V5:

Merge hotplug script patch (2/5) and hotplug script setup/teardown
patch (3/5) into a single patch.

Changes in V4:

[1/5] Remove check for libnl command line utils in autoconf checks

[2/5] minor nits

[3/5] define LIBXL_HAVE_REMUS_NETBUF in libxl.h

[4/5] clean ups. Make the usleep in checkpoint callback asynchronous

[5/5] minor nits

Changes in V3:
[1/5] Fix redundant checks in configure scripts
       (based on Ian Campbell's suggestions)

[2/5] Introduce locking in the script, during IFB setup.
       Add xenstore paths used by netbuf scripts
       to xenstore-paths.markdown

[3/5] Hotplug scripts setup/teardown invocations are now asynchronous
       following IanJ's feedback.  However, the invocations are still
       sequential.

[5/5] Allow per-domain specification of netbuffer scripts in xl remus
       commmand.

And minor nits throughout the series based on feedback from
the last version

Changes in V2:
[1/5] Configure script will automatically enable/disable network
       buffer support depending on the availability of the appropriate
       libnl3 version. [If libnl3 is unavailable, a warning message will be
       printed to let the user know that the feature has been disabled.]

       use macros from pkg.m4 instead of pkg-config commands
       removed redundant checks for libnl3 libraries.

[3,4/5] - Minor nits.

Version 1:

[1/5] Changes to autoconf scripts to check for libnl3. Add linker flags
       to libxl Makefile.

[2/5] External script to setup/teardown network buffering using libnl3's
       CLI. This script will be invoked by libxl before starting Remus.
       The script's main job is to bring up an IFB device with plug qdisc
       attached to it.  It then re-routes egress traffic from the guest's
       vif to the IFB device.

[3/5] Libxl code to invoke the external setup script, followed by netlink
       related setup to obtain a handle on the output buffers attached
       to each vif.

[4/5] Libxl interaction with network buffer module in the kernel via
       libnl3 API.

[5/5] xl cmdline switch to explicitly enable network buffering when
       starting remus.


   Few things to note(by shriram):

     a) Based on previous email discussions, the setup/teardown task has
     been moved to a hotplug style shell script which can be customized as
     desired, instead of implementing it as C code inside libxl.

     b) Libnl3 is not available on NetBSD. Nor is it available on CentOS
    (Linux).  So I have made network buffering support an optional feature
    so that it can be disabled if desired.

    c) NetBSD does not have libnl3. So I have put the setup script under
    tools/hotplug/Linux folder.

thanks

Shriram Rajagopalan (1):
   libxl: network buffering cmdline switch

Yang Hongyang (4):
   libxl: introduce asynchronous execution API
   remus: add libnl3 dependency for network buffering support
   remus: introduce remus device
   remus: implement remus network buffering for nic devices

  README                                 |   4 +
  config/Tools.mk.in                     |   4 +
  docs/man/xl.conf.pod.5                 |   6 +
  docs/man/xl.pod.1                      |  11 +-
  docs/misc/xenstore-paths.markdown      |   4 +
  tools/configure.ac                     |  15 +
  tools/hotplug/Linux/Makefile           |   1 +
  tools/hotplug/Linux/remus-netbuf-setup | 183 +++++++++++
  tools/libxl/Makefile                   |  15 +
  tools/libxl/libxl.c                    |  52 +++-
  tools/libxl/libxl.h                    |  13 +
  tools/libxl/libxl_aoutils.c            |  89 ++++++
  tools/libxl/libxl_device.c             |  78 ++---
  tools/libxl/libxl_dom.c                | 132 +++++++-
  tools/libxl/libxl_internal.h           | 151 ++++++++-
  tools/libxl/libxl_netbuffer.c          | 550 +++++++++++++++++++++++++++++++++
  tools/libxl/libxl_nonetbuffer.c        |  98 ++++++
  tools/libxl/libxl_remus_device.c       | 323 +++++++++++++++++++
  tools/libxl/libxl_save_msgs_gen.pl     |   2 +-
  tools/libxl/libxl_types.idl            |   3 +
  tools/libxl/xl.c                       |   4 +
  tools/libxl/xl.h                       |   1 +
  tools/libxl/xl_cmdimpl.c               |  28 +-
  tools/libxl/xl_cmdtable.c              |   3 +
  tools/remus/README                     |   6 +
  25 files changed, 1694 insertions(+), 82 deletions(-)
  create mode 100644 tools/hotplug/Linux/remus-netbuf-setup
  create mode 100644 tools/libxl/libxl_netbuffer.c
  create mode 100644 tools/libxl/libxl_nonetbuffer.c
  create mode 100644 tools/libxl/libxl_remus_device.c

--
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
.


--
Thanks,
Yang.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.