[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v4 08/15] tools/xendomains: move to libexec and use a smaller init helper



From: "Luis R. Rodriguez" <mcgrof@xxxxxxxx>

The xendomains script can be reused with systemd systems as it
does not control services or sockets per se, but does a one shot
scrape of domUs it needs start bring up, stop, reload so we're
going to reuse it. This moves the core of the script to libexec
and leaves only a helper on init.

Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
Cc: Ian Campbell <ian.campbell@xxxxxxxxxx>
Cc: Jan RÄkorajski <baggins@xxxxxxxxxxxxx>
Cc: M A Young <m.a.young@xxxxxxxxxxxx>
Cc: Jacek Konieczny <jajcus@xxxxxxxxxx>
Cc: xen-devel@xxxxxxxxxxxxxxxxxxxx
Signed-off-by: Luis R. Rodriguez <mcgrof@xxxxxxxx>
---
 tools/hotplug/Linux/Makefile          |   6 +
 tools/hotplug/Linux/init.d/xendomains | 567 +-------------------------------
 tools/hotplug/Linux/xendomains        | 585 ++++++++++++++++++++++++++++++++++
 3 files changed, 607 insertions(+), 551 deletions(-)
 create mode 100644 tools/hotplug/Linux/xendomains

diff --git a/tools/hotplug/Linux/Makefile b/tools/hotplug/Linux/Makefile
index 4874ec5..7e6646e 100644
--- a/tools/hotplug/Linux/Makefile
+++ b/tools/hotplug/Linux/Makefile
@@ -3,6 +3,7 @@ include $(XEN_ROOT)/tools/Rules.mk
 
 # Init scripts.
 XENDOMAINS_INITD = init.d/xendomains
+XENDOMAINS_LIBEXEC = xendomains
 XENDOMAINS_SYSCONFIG = init.d/sysconfig.xendomains
 
 XENCOMMONS_INITD = init.d/xencommons
@@ -45,6 +46,11 @@ install: all install-initd install-scripts install-udev
 install-initd:
        [ -d $(DESTDIR)$(INITD_DIR) ] || $(INSTALL_DIR) $(DESTDIR)$(INITD_DIR)
        [ -d $(DESTDIR)$(SYSCONFIG_DIR) ] || $(INSTALL_DIR) 
$(DESTDIR)$(SYSCONFIG_DIR)
+       [ -d $(DESTDIR)$(LIBEXEC) ] || $(INSTALL_DIR) $(DESTDIR)$(LIBEXEC)
+ifeq ($(CONFIG_XEND),y)
+       $(INSTALL_PROG) $(XEND_INITD) $(DESTDIR)$(INITD_DIR)
+endif
+       $(INSTALL_PROG) $(XENDOMAINS_LIBEXEC) $(DESTDIR)$(LIBEXEC)
        $(INSTALL_PROG) $(XENDOMAINS_INITD) $(DESTDIR)$(INITD_DIR)
        $(INSTALL_DATA) $(XENDOMAINS_SYSCONFIG) 
$(DESTDIR)$(SYSCONFIG_DIR)/xendomains
        $(INSTALL_PROG) $(XENCOMMONS_INITD) $(DESTDIR)$(INITD_DIR)
diff --git a/tools/hotplug/Linux/init.d/xendomains 
b/tools/hotplug/Linux/init.d/xendomains
index 587568d..d0122fc 100644
--- a/tools/hotplug/Linux/init.d/xendomains
+++ b/tools/hotplug/Linux/init.d/xendomains
@@ -1,18 +1,13 @@
 #!/bin/bash
 #
 # /etc/init.d/xendomains
-# Start / stop domains automatically when domain 0 boots / shuts down.
+# Wrapper to start / stop domains automatically when domain 0 boots / shuts 
down
 #
 # chkconfig: 345 99 00
-# description: Start / stop Xen domains.
+# description: Helper to start / stop Xen domains.
 #
-# This script offers fairly basic functionality.  It should work on Redhat
-# but also on LSB-compliant SuSE releases and on Debian with the LSB package
-# installed.  (LSB is the Linux Standard Base)
-#
-# Based on the example in the "Designing High Quality Integrated Linux
-# Applications HOWTO" by Avi Alkalay
-# <http://www.tldp.org/HOWTO/HighQuality-Apps-HOWTO/>
+# This script is a wrapper init helper for the real workload horse script.
+# It should work on LSB-compliant systems.
 #
 ### BEGIN INIT INFO
 # Provides:          xendomains
@@ -22,564 +17,34 @@
 # Should-Stop:       xend
 # Default-Start:     2 3 5
 # Default-Stop:      0 1 6
-# Short-Description: Start/stop secondary xen domains
-# Description:       Start / stop domains automatically when domain 0
-#                    boots / shuts down.
+# Short-Description: Wrapper to start/stop secondary xen domains
+# Description:       Wrapper for starting / stopping domains automatically
+#                    when domain 0 boots / shuts down on systems using init.
+#                    The $SBINDIR/xendomains helper is shared between init and
+#                    systemd systems.
 ### END INIT INFO
 
 . /etc/xen/scripts/hotplugpath.sh
 
-CMD=${SBINDIR}/xl
-HEADCOMP="Xen saved domain"
-$CMD list &> /dev/null
-if test $? -ne 0
-then
-       CMD=${SBINDIR}/xm
-       HEADCOMP="LinuxGuestRecord"
-fi
-
-$CMD list &> /dev/null
-if test $? -ne 0
-then
-       exit 0;
-fi
-
-# Correct exit code would probably be 5, but it's enough
-# if xend complains if we're not running as privileged domain
-if ! [ -e /proc/xen/privcmd ]; then
-       exit 0
-fi
-
-# See docs/misc/distro_mapping.txt
-if [ -d /var/lock/subsys ]; then
-       LOCKFILE=/var/lock/subsys/xendomains
-else
-       LOCKFILE=/var/lock/xendomains
-fi
-
-if [ -d /etc/sysconfig ]; then
-       XENDOM_CONFIG=/etc/sysconfig/xendomains
-else
-       XENDOM_CONFIG=/etc/default/xendomains
-fi
-
-test -r $XENDOM_CONFIG || { echo "$XENDOM_CONFIG not existing";
-       if [ "$1" = "stop" ]; then exit 0;
-       else exit 6; fi; }
-
-. $XENDOM_CONFIG
-
-# Use the SUSE rc_ init script functions;
-# emulate them on LSB, RH and other systems
-if test -e /etc/rc.status; then
-    # SUSE rc script library
-    . /etc/rc.status
-else
-    _cmd=$1
-    declare -a _SMSG
-    if test "${_cmd}" = "status"; then
-       _SMSG=(running dead dead unused unknown)
-       _RC_UNUSED=3
-    else
-       _SMSG=(done failed failed missed failed skipped unused failed failed)
-       _RC_UNUSED=6
-    fi
-    if test -e /etc/init.d/functions; then
-       # REDHAT
-       . /etc/init.d/functions
-       echo_rc()
-       {
-           #echo -n "  [${_SMSG[${_RC_RV}]}] "
-           if test ${_RC_RV} = 0; then
-               success "  [${_SMSG[${_RC_RV}]}] "
-           else
-               failure "  [${_SMSG[${_RC_RV}]}] "
-           fi
-       }
-    elif test -e /lib/lsb/init-functions; then
-       # LSB
-       . /lib/lsb/init-functions
-        if alias log_success_msg >/dev/null 2>/dev/null; then
-         echo_rc()
-         {
-              echo "  [${_SMSG[${_RC_RV}]}] "
-         }
-        else
-         echo_rc()
-         {
-           if test ${_RC_RV} = 0; then
-               log_success_msg "  [${_SMSG[${_RC_RV}]}] "
-           else
-               log_failure_msg "  [${_SMSG[${_RC_RV}]}] "
-           fi
-         }
-        fi
-    else
-       # emulate it
-       echo_rc()
-       {
-           echo "  [${_SMSG[${_RC_RV}]}] "
-       }
-    fi
-    rc_reset() { _RC_RV=0; }
-    rc_failed()
-    {
-       if test -z "$1"; then
-           _RC_RV=1;
-       elif test "$1" != "0"; then
-           _RC_RV=$1;
-       fi
-       return ${_RC_RV}
-    }
-    rc_check()
-    {
-       return rc_failed $?
-    }
-    rc_status()
-    {
-       rc_failed $?
-       if test "$1" = "-r"; then _RC_RV=0; shift; fi
-       if test "$1" = "-s"; then rc_failed 5; echo_rc; rc_failed 3; shift; fi
-       if test "$1" = "-u"; then rc_failed ${_RC_UNUSED}; echo_rc; rc_failed 
3; shift; fi
-       if test "$1" = "-v"; then echo_rc; shift; fi
-       if test "$1" = "-r"; then _RC_RV=0; shift; fi
-       return ${_RC_RV}
-    }
-    rc_exit() { exit ${_RC_RV}; }
-    rc_active()
-    {
-       if test -z "$RUNLEVEL"; then read RUNLEVEL REST < <(/sbin/runlevel); fi
-       if test -e /etc/init.d/S[0-9][0-9]${1}; then return 0; fi
-       return 1
-    }
-fi
-
-if ! which usleep >&/dev/null
-then
-  usleep()
-  {
-    if [ -n "$1" ]
-    then
-      sleep $(( $1 / 1000000 ))
-    fi
-  }
-fi
-
-# Reset status of this service
-rc_reset
-
-##
-# Returns 0 (success) if the given parameter names a directory, and that
-# directory is not empty.
-#
-contains_something()
-{
-  if [ -d "$1" ] && [ `/bin/ls $1 | wc -l` -gt 0 ]
-  then
-    return 0
-  else
-    return 1
-  fi
-}
-
-# read name from xen config file
-rdname()
-{
-    NM=$($CMD create --quiet --dryrun --defconfig "$1" |
-         sed -n 's/^.*(name \(.*\))$/\1/p;s/^.*"name": "\(.*\)",$/\1/p')
-}
-
-rdnames()
-{
-    NAMES=
-    if ! contains_something "$XENDOMAINS_AUTO"
-    then
-       return
-    fi
-    for dom in $XENDOMAINS_AUTO/*; do
-       rdname $dom
-       if test -z $NAMES; then
-           NAMES=$NM;
-       else
-           NAMES="$NAMES|$NM"
-       fi
-    done
-}
-
-LIST_GREP='(domain\|(domid\|(name\|^    {$\|"name":\|"domid":'
-parseln()
-{
-    if [[ "$1" =~ '(domain' ]] || [[ "$1" = "{" ]]; then
-        name=;id=
-    elif [[ "$1" =~ '(name' ]]; then
-        name=$(echo $1 | sed -e 's/^.*(name \(.*\))$/\1/')
-    elif [[ "$1" =~ '(domid' ]]; then
-        id=$(echo $1 | sed -e 's/^.*(domid \(.*\))$/\1/')
-    elif [[ "$1" =~ '"name":' ]]; then
-        name=$(echo $1 | sed -e 's/^.*"name": "\(.*\)",$/\1/')
-    elif [[ "$1" =~ '"domid":' ]]; then
-        id=$(echo $1 | sed -e 's/^.*"domid": \(.*\),$/\1/')
-    fi
-
-    [ -n "$name" -a -n "$id" ] && return 0 || return 1
-}
-
-is_running()
-{
-    rdname $1
-    RC=1
-    name=;id=
-    while read LN; do
-       parseln "$LN" || continue
-       if test $id = 0; then continue; fi
-       case $name in
-           ($NM)
-               RC=0
-               ;;
-       esac
-    done < <($CMD list -l | grep "$LIST_GREP")
-    return $RC
-}
-
-start()
-{
-    if [ -f $LOCKFILE ]; then
-       echo -e "xendomains already running (lockfile exists)"
-       return;
-    fi
-
-    saved_domains=" "
-    if [ "$XENDOMAINS_RESTORE" = "true" ] &&
-       contains_something "$XENDOMAINS_SAVE"
-    then
-       mkdir -p $(dirname "$LOCKFILE")
-       touch $LOCKFILE
-       echo -n "Restoring Xen domains:"
-       saved_domains=`ls $XENDOMAINS_SAVE`
-        for dom in $XENDOMAINS_SAVE/*; do
-            if [ -f $dom ] ; then
-                HEADER=`head -c 16 $dom | head -n 1 2> /dev/null`
-                if [ "$HEADER" = "$HEADCOMP" ]; then
-                    echo -n " ${dom##*/}"
-                    XMR=`$CMD restore $dom 2>&1 1>/dev/null`
-                    #$CMD restore $dom
-                    if [ $? -ne 0 ]; then
-                        echo -e "\nAn error occurred while restoring domain 
${dom##*/}:\n$XMR"
-                        rc_failed $?
-                        echo -e '!'
-                    else
-                        # mv $dom ${dom%/*}/.${dom##*/}
-                        rm $dom
-                    fi
-                fi
-            fi
-        done
-       echo -e
-    fi
-
-    if contains_something "$XENDOMAINS_AUTO"
-    then
-       touch $LOCKFILE
-       echo -n "Starting auto Xen domains:"
-       # We expect config scripts for auto starting domains to be in
-       # XENDOMAINS_AUTO - they could just be symlinks to files elsewhere
-
-       # Create all domains with config files in XENDOMAINS_AUTO.
-       # TODO: We should record which domain name belongs
-       # so we have the option to selectively shut down / migrate later
-       # If a domain statefile from $XENDOMAINS_SAVE matches a domain name
-       # in $XENDOMAINS_AUTO, do not try to start that domain; if it didn't
-       # restore correctly it requires administrative attention.
-       for dom in $XENDOMAINS_AUTO/*; do
-           echo -n " ${dom##*/}"
-           shortdom=$(echo $dom | sed -n 's/^.*\/\(.*\)$/\1/p')
-           echo $saved_domains | grep -w $shortdom > /dev/null
-           if [ $? -eq 0 ] || is_running $dom; then
-               echo -n "(skip)"
-           else
-               XMC=`$CMD create --quiet --defconfig $dom`
-               if [ $? -ne 0 ]; then
-                   echo -e "\nAn error occurred while creating domain 
${dom##*/}: $XMC\n"
-                   rc_failed $?
-                   echo -e '!'
-               else
-                   usleep $XENDOMAINS_CREATE_USLEEP
-               fi
-           fi
-       done
-    fi
-}
-
-all_zombies()
-{
-    name=;id=
-    while read LN; do
-       parseln "$LN" || continue
-       if test $id = 0; then continue; fi
-       if test "$state" != "-b---d" -a "$state" != "-----d"; then
-           return 1;
-       fi
-    done < <($CMD list -l | grep "$LIST_GREP")
-    return 0
-}
-
-# Wait for max $XENDOMAINS_STOP_MAXWAIT for $CMD $1 to finish;
-# if it has not exited by that time kill it, so the init script will
-# succeed within a finite amount of time; if $2 is nonnull, it will
-# kill the command as well as soon as no domain (except for zombies)
-# are left (used for shutdown --all). Third parameter, if any, suppresses
-# output of dots per working state (formatting issues)
-watchdog_xencmd()
-{
-    if test -z "$XENDOMAINS_STOP_MAXWAIT" -o "$XENDOMAINS_STOP_MAXWAIT" = "0"; 
then
-       exit
-    fi
-
-    usleep 20000
-    for no in `seq 0 $XENDOMAINS_STOP_MAXWAIT`; do
-       # exit if $CMD save/migrate/shutdown is finished
-       PSAX=`ps axlw | grep "$CMD $1" | grep -v grep`
-       if test -z "$PSAX"; then exit; fi
-       if ! test -n "$3"; then echo -n '.'; fi
-       sleep 1
-       # go to kill immediately if there's only zombies left
-       if all_zombies && test -n "$2"; then break; fi
-    done
-    sleep 1
-    read PSF PSUID PSPID PSPPID < <(echo "$PSAX")
-    # kill $CMD $1
-    kill $PSPID >/dev/null 2>&1
-
-    echo -e .
-}
-
-stop()
-{
-    exec 3>&2 2> /dev/null
-
-    # Collect list of domains to shut down
-    if test "$XENDOMAINS_AUTO_ONLY" = "true"; then
-       rdnames
-    fi
-    echo -n "Shutting down Xen domains:"
-    name=;id=
-    while read LN; do
-       parseln "$LN" || continue
-       if test $id = 0; then continue; fi
-       echo -n " $name"
-       if test "$XENDOMAINS_AUTO_ONLY" = "true"; then
-           eval "
-           case \"\$name\" in
-               ($NAMES)
-                   # nothing
-                   ;;
-               (*)
-                   echo -e '(skip)'
-                   continue
-                   ;;
-           esac
-           "
-       fi
-       # XENDOMAINS_SYSRQ chould be something like just "s"
-       # or "s e i u" or even "s e s i u o"
-       # for the latter, you should set XENDOMAINS_USLEEP to 1200000 or so
-       if test -n "$XENDOMAINS_SYSRQ"; then
-           for sysrq in $XENDOMAINS_SYSRQ; do
-               echo -n "(SR-$sysrq)"
-               XMR=`$CMD sysrq $id $sysrq 2>&1 1>/dev/null`
-               if test $? -ne 0; then
-                   echo -e "\nAn error occurred while doing sysrq on 
domain:\n$XMR\n"
-                   rc_failed $?
-                   echo -n '!'
-               fi
-               # usleep just ignores empty arg
-               usleep $XENDOMAINS_USLEEP
-           done
-       fi
-       if test "$state" = "-b---d" -o "$state" = "-----d"; then
-           echo -n "(zomb)"
-           continue
-       fi
-       if test -n "$XENDOMAINS_MIGRATE"; then
-           echo -n "(migr)"
-           watchdog_xencmd migrate &
-           WDOG_PID=$!
-           XMR=`$CMD migrate $id $XENDOMAINS_MIGRATE 2>&1 1>/dev/null`
-           if test $? -ne 0; then
-               echo -e "\nAn error occurred while migrating domain:\n$XMR\n"
-               rc_failed $?
-               echo -e '!'
-
-               kill $WDOG_PID >/dev/null 2>&1
-           else
-               kill $WDOG_PID >/dev/null 2>&1
-
-               echo -e .
-               usleep 1000
-               continue
-           fi
-       fi
-       if test -n "$XENDOMAINS_SAVE"; then
-           echo -n "(save)"
-           watchdog_xencmd save &
-           WDOG_PID=$!
-           mkdir -p "$XENDOMAINS_SAVE"
-           XMR=`$CMD save $id $XENDOMAINS_SAVE/$name 2>&1 1>/dev/null`
-           if test $? -ne 0; then
-               echo -e "\nAn error occurred while saving domain:\n$XMR\n"
-               rc_failed $?
-               echo -e '!'
-               kill $WDOG_PID >/dev/null 2>&1
-           else
-               kill $WDOG_PID >/dev/null 2>&1
-               echo -e .
-               usleep 1000
-               continue
-           fi
-       fi
-       if test -n "$XENDOMAINS_SHUTDOWN"; then
-           # XENDOMAINS_SHUTDOWN should be "--wait"
-           echo -n "(shut)"
-           watchdog_xencmd shutdown &
-           WDOG_PID=$!
-           XMR=`$CMD shutdown $XENDOMAINS_SHUTDOWN $id 2>&1 1>/dev/null`
-           if test $? -ne 0; then
-               echo -e "\nAn error occurred while shutting down 
domain:\n$XMR\n"
-               rc_failed $?
-               echo -e '!'
-           fi
-           kill $WDOG_PID >/dev/null 2>&1
-       fi
-    done < <($CMD list -l | grep "$LIST_GREP")
-
-    # NB. this shuts down ALL Xen domains (politely), not just the ones in
-    # AUTODIR/*
-    # This is because it's easier to do ;-) but arguably if this script is run
-    # on system shutdown then it's also the right thing to do.
-    if ! all_zombies && test -n "$XENDOMAINS_SHUTDOWN_ALL"; then
-       # XENDOMAINS_SHUTDOWN_ALL should be "--all --wait"
-       echo -n " SHUTDOWN_ALL "
-       watchdog_xencmd shutdown 1 false &
-       WDOG_PID=$!
-       XMR=`$CMD shutdown $XENDOMAINS_SHUTDOWN_ALL 2>&1 1>/dev/null`
-       if test $? -ne 0; then
-           echo -e "\nAn error occurred while shutting down all domains: 
$XMR\n"
-           rc_failed $?
-           echo -e '!'
-       fi
-       kill $WDOG_PID >/dev/null 2>&1
-    fi
-
-    # Unconditionally delete lock file
-    rm -f $LOCKFILE
-
-    exec 2>&3
-}
-
-check_domain_up()
-{
-    name=;id=
-    while read LN; do
-       parseln "$LN" || continue
-       if test $id = 0; then continue; fi
-       case $name in
-           ($1)
-               return 0
-               ;;
-       esac
-    done < <($CMD list -l | grep "$LIST_GREP")
-    return 1
-}
-
-check_all_auto_domains_up()
-{
-    if ! contains_something "$XENDOMAINS_AUTO"
-    then
-      return 0
-    fi
-    missing=
-    for nm in $XENDOMAINS_AUTO/*; do
-       rdname $nm
-       found=0
-       if check_domain_up "$NM"; then
-           echo -n " $name"
-       else
-           missing="$missing $NM"
-       fi
-    done
-    if test -n "$missing"; then
-       echo -n " MISS AUTO:$missing"
-       return 1
-    fi
-    return 0
-}
-
-check_all_saved_domains_up()
-{
-    if ! contains_something "$XENDOMAINS_SAVE"
-    then
-      return 0
-    fi
-    missing=`/bin/ls $XENDOMAINS_SAVE`
-    echo -n " MISS SAVED: " $missing
-    return 1
-}
-
-# This does NOT necessarily restart all running domains: instead it
-# stops all running domains and then boots all the domains specified in
-# AUTODIR.  If other domains have been started manually then they will
-# not get restarted.
-# Commented out to avoid confusion!
-
-restart()
-{
-    stop
-    start
-}
-
-reload()
-{
-    restart
-}
-
-
 case "$1" in
     start)
-       start
-       rc_status
-       if test -f $LOCKFILE; then rc_status -v; fi
+       $SBINDIR/xendomains start
        ;;
-
     stop)
-       stop
-       rc_status -v
+       $SBINDIR/xendomains stop
        ;;
-
     restart)
-       restart
+       $SBINDIR/xendomains restart
        ;;
     reload)
-       reload
+       $SBINDIR/xendomains reload
        ;;
-
     status)
-       echo -n "Checking for xendomains:"
-       if test ! -f $LOCKFILE; then
-           rc_failed 3
-       else
-           check_all_auto_domains_up
-           rc_status
-           check_all_saved_domains_up
-           rc_status
-       fi
-       rc_status -v
+       $SBINDIR/xendomains status
        ;;
-
     *)
        echo "Usage: $0 {start|stop|restart|reload|status}"
-       rc_failed 3
-       rc_status -v
+       exit 3
        ;;
 esac
-
-rc_exit
+exit $?
diff --git a/tools/hotplug/Linux/xendomains b/tools/hotplug/Linux/xendomains
new file mode 100644
index 0000000..587568d
--- /dev/null
+++ b/tools/hotplug/Linux/xendomains
@@ -0,0 +1,585 @@
+#!/bin/bash
+#
+# /etc/init.d/xendomains
+# Start / stop domains automatically when domain 0 boots / shuts down.
+#
+# chkconfig: 345 99 00
+# description: Start / stop Xen domains.
+#
+# This script offers fairly basic functionality.  It should work on Redhat
+# but also on LSB-compliant SuSE releases and on Debian with the LSB package
+# installed.  (LSB is the Linux Standard Base)
+#
+# Based on the example in the "Designing High Quality Integrated Linux
+# Applications HOWTO" by Avi Alkalay
+# <http://www.tldp.org/HOWTO/HighQuality-Apps-HOWTO/>
+#
+### BEGIN INIT INFO
+# Provides:          xendomains
+# Required-Start:    $syslog $remote_fs xenstored xenconsoled
+# Should-Start:      xend
+# Required-Stop:     $syslog $remote_fs xenstored xenconsoled
+# Should-Stop:       xend
+# Default-Start:     2 3 5
+# Default-Stop:      0 1 6
+# Short-Description: Start/stop secondary xen domains
+# Description:       Start / stop domains automatically when domain 0
+#                    boots / shuts down.
+### END INIT INFO
+
+. /etc/xen/scripts/hotplugpath.sh
+
+CMD=${SBINDIR}/xl
+HEADCOMP="Xen saved domain"
+$CMD list &> /dev/null
+if test $? -ne 0
+then
+       CMD=${SBINDIR}/xm
+       HEADCOMP="LinuxGuestRecord"
+fi
+
+$CMD list &> /dev/null
+if test $? -ne 0
+then
+       exit 0;
+fi
+
+# Correct exit code would probably be 5, but it's enough
+# if xend complains if we're not running as privileged domain
+if ! [ -e /proc/xen/privcmd ]; then
+       exit 0
+fi
+
+# See docs/misc/distro_mapping.txt
+if [ -d /var/lock/subsys ]; then
+       LOCKFILE=/var/lock/subsys/xendomains
+else
+       LOCKFILE=/var/lock/xendomains
+fi
+
+if [ -d /etc/sysconfig ]; then
+       XENDOM_CONFIG=/etc/sysconfig/xendomains
+else
+       XENDOM_CONFIG=/etc/default/xendomains
+fi
+
+test -r $XENDOM_CONFIG || { echo "$XENDOM_CONFIG not existing";
+       if [ "$1" = "stop" ]; then exit 0;
+       else exit 6; fi; }
+
+. $XENDOM_CONFIG
+
+# Use the SUSE rc_ init script functions;
+# emulate them on LSB, RH and other systems
+if test -e /etc/rc.status; then
+    # SUSE rc script library
+    . /etc/rc.status
+else
+    _cmd=$1
+    declare -a _SMSG
+    if test "${_cmd}" = "status"; then
+       _SMSG=(running dead dead unused unknown)
+       _RC_UNUSED=3
+    else
+       _SMSG=(done failed failed missed failed skipped unused failed failed)
+       _RC_UNUSED=6
+    fi
+    if test -e /etc/init.d/functions; then
+       # REDHAT
+       . /etc/init.d/functions
+       echo_rc()
+       {
+           #echo -n "  [${_SMSG[${_RC_RV}]}] "
+           if test ${_RC_RV} = 0; then
+               success "  [${_SMSG[${_RC_RV}]}] "
+           else
+               failure "  [${_SMSG[${_RC_RV}]}] "
+           fi
+       }
+    elif test -e /lib/lsb/init-functions; then
+       # LSB
+       . /lib/lsb/init-functions
+        if alias log_success_msg >/dev/null 2>/dev/null; then
+         echo_rc()
+         {
+              echo "  [${_SMSG[${_RC_RV}]}] "
+         }
+        else
+         echo_rc()
+         {
+           if test ${_RC_RV} = 0; then
+               log_success_msg "  [${_SMSG[${_RC_RV}]}] "
+           else
+               log_failure_msg "  [${_SMSG[${_RC_RV}]}] "
+           fi
+         }
+        fi
+    else
+       # emulate it
+       echo_rc()
+       {
+           echo "  [${_SMSG[${_RC_RV}]}] "
+       }
+    fi
+    rc_reset() { _RC_RV=0; }
+    rc_failed()
+    {
+       if test -z "$1"; then
+           _RC_RV=1;
+       elif test "$1" != "0"; then
+           _RC_RV=$1;
+       fi
+       return ${_RC_RV}
+    }
+    rc_check()
+    {
+       return rc_failed $?
+    }
+    rc_status()
+    {
+       rc_failed $?
+       if test "$1" = "-r"; then _RC_RV=0; shift; fi
+       if test "$1" = "-s"; then rc_failed 5; echo_rc; rc_failed 3; shift; fi
+       if test "$1" = "-u"; then rc_failed ${_RC_UNUSED}; echo_rc; rc_failed 
3; shift; fi
+       if test "$1" = "-v"; then echo_rc; shift; fi
+       if test "$1" = "-r"; then _RC_RV=0; shift; fi
+       return ${_RC_RV}
+    }
+    rc_exit() { exit ${_RC_RV}; }
+    rc_active()
+    {
+       if test -z "$RUNLEVEL"; then read RUNLEVEL REST < <(/sbin/runlevel); fi
+       if test -e /etc/init.d/S[0-9][0-9]${1}; then return 0; fi
+       return 1
+    }
+fi
+
+if ! which usleep >&/dev/null
+then
+  usleep()
+  {
+    if [ -n "$1" ]
+    then
+      sleep $(( $1 / 1000000 ))
+    fi
+  }
+fi
+
+# Reset status of this service
+rc_reset
+
+##
+# Returns 0 (success) if the given parameter names a directory, and that
+# directory is not empty.
+#
+contains_something()
+{
+  if [ -d "$1" ] && [ `/bin/ls $1 | wc -l` -gt 0 ]
+  then
+    return 0
+  else
+    return 1
+  fi
+}
+
+# read name from xen config file
+rdname()
+{
+    NM=$($CMD create --quiet --dryrun --defconfig "$1" |
+         sed -n 's/^.*(name \(.*\))$/\1/p;s/^.*"name": "\(.*\)",$/\1/p')
+}
+
+rdnames()
+{
+    NAMES=
+    if ! contains_something "$XENDOMAINS_AUTO"
+    then
+       return
+    fi
+    for dom in $XENDOMAINS_AUTO/*; do
+       rdname $dom
+       if test -z $NAMES; then
+           NAMES=$NM;
+       else
+           NAMES="$NAMES|$NM"
+       fi
+    done
+}
+
+LIST_GREP='(domain\|(domid\|(name\|^    {$\|"name":\|"domid":'
+parseln()
+{
+    if [[ "$1" =~ '(domain' ]] || [[ "$1" = "{" ]]; then
+        name=;id=
+    elif [[ "$1" =~ '(name' ]]; then
+        name=$(echo $1 | sed -e 's/^.*(name \(.*\))$/\1/')
+    elif [[ "$1" =~ '(domid' ]]; then
+        id=$(echo $1 | sed -e 's/^.*(domid \(.*\))$/\1/')
+    elif [[ "$1" =~ '"name":' ]]; then
+        name=$(echo $1 | sed -e 's/^.*"name": "\(.*\)",$/\1/')
+    elif [[ "$1" =~ '"domid":' ]]; then
+        id=$(echo $1 | sed -e 's/^.*"domid": \(.*\),$/\1/')
+    fi
+
+    [ -n "$name" -a -n "$id" ] && return 0 || return 1
+}
+
+is_running()
+{
+    rdname $1
+    RC=1
+    name=;id=
+    while read LN; do
+       parseln "$LN" || continue
+       if test $id = 0; then continue; fi
+       case $name in
+           ($NM)
+               RC=0
+               ;;
+       esac
+    done < <($CMD list -l | grep "$LIST_GREP")
+    return $RC
+}
+
+start()
+{
+    if [ -f $LOCKFILE ]; then
+       echo -e "xendomains already running (lockfile exists)"
+       return;
+    fi
+
+    saved_domains=" "
+    if [ "$XENDOMAINS_RESTORE" = "true" ] &&
+       contains_something "$XENDOMAINS_SAVE"
+    then
+       mkdir -p $(dirname "$LOCKFILE")
+       touch $LOCKFILE
+       echo -n "Restoring Xen domains:"
+       saved_domains=`ls $XENDOMAINS_SAVE`
+        for dom in $XENDOMAINS_SAVE/*; do
+            if [ -f $dom ] ; then
+                HEADER=`head -c 16 $dom | head -n 1 2> /dev/null`
+                if [ "$HEADER" = "$HEADCOMP" ]; then
+                    echo -n " ${dom##*/}"
+                    XMR=`$CMD restore $dom 2>&1 1>/dev/null`
+                    #$CMD restore $dom
+                    if [ $? -ne 0 ]; then
+                        echo -e "\nAn error occurred while restoring domain 
${dom##*/}:\n$XMR"
+                        rc_failed $?
+                        echo -e '!'
+                    else
+                        # mv $dom ${dom%/*}/.${dom##*/}
+                        rm $dom
+                    fi
+                fi
+            fi
+        done
+       echo -e
+    fi
+
+    if contains_something "$XENDOMAINS_AUTO"
+    then
+       touch $LOCKFILE
+       echo -n "Starting auto Xen domains:"
+       # We expect config scripts for auto starting domains to be in
+       # XENDOMAINS_AUTO - they could just be symlinks to files elsewhere
+
+       # Create all domains with config files in XENDOMAINS_AUTO.
+       # TODO: We should record which domain name belongs
+       # so we have the option to selectively shut down / migrate later
+       # If a domain statefile from $XENDOMAINS_SAVE matches a domain name
+       # in $XENDOMAINS_AUTO, do not try to start that domain; if it didn't
+       # restore correctly it requires administrative attention.
+       for dom in $XENDOMAINS_AUTO/*; do
+           echo -n " ${dom##*/}"
+           shortdom=$(echo $dom | sed -n 's/^.*\/\(.*\)$/\1/p')
+           echo $saved_domains | grep -w $shortdom > /dev/null
+           if [ $? -eq 0 ] || is_running $dom; then
+               echo -n "(skip)"
+           else
+               XMC=`$CMD create --quiet --defconfig $dom`
+               if [ $? -ne 0 ]; then
+                   echo -e "\nAn error occurred while creating domain 
${dom##*/}: $XMC\n"
+                   rc_failed $?
+                   echo -e '!'
+               else
+                   usleep $XENDOMAINS_CREATE_USLEEP
+               fi
+           fi
+       done
+    fi
+}
+
+all_zombies()
+{
+    name=;id=
+    while read LN; do
+       parseln "$LN" || continue
+       if test $id = 0; then continue; fi
+       if test "$state" != "-b---d" -a "$state" != "-----d"; then
+           return 1;
+       fi
+    done < <($CMD list -l | grep "$LIST_GREP")
+    return 0
+}
+
+# Wait for max $XENDOMAINS_STOP_MAXWAIT for $CMD $1 to finish;
+# if it has not exited by that time kill it, so the init script will
+# succeed within a finite amount of time; if $2 is nonnull, it will
+# kill the command as well as soon as no domain (except for zombies)
+# are left (used for shutdown --all). Third parameter, if any, suppresses
+# output of dots per working state (formatting issues)
+watchdog_xencmd()
+{
+    if test -z "$XENDOMAINS_STOP_MAXWAIT" -o "$XENDOMAINS_STOP_MAXWAIT" = "0"; 
then
+       exit
+    fi
+
+    usleep 20000
+    for no in `seq 0 $XENDOMAINS_STOP_MAXWAIT`; do
+       # exit if $CMD save/migrate/shutdown is finished
+       PSAX=`ps axlw | grep "$CMD $1" | grep -v grep`
+       if test -z "$PSAX"; then exit; fi
+       if ! test -n "$3"; then echo -n '.'; fi
+       sleep 1
+       # go to kill immediately if there's only zombies left
+       if all_zombies && test -n "$2"; then break; fi
+    done
+    sleep 1
+    read PSF PSUID PSPID PSPPID < <(echo "$PSAX")
+    # kill $CMD $1
+    kill $PSPID >/dev/null 2>&1
+
+    echo -e .
+}
+
+stop()
+{
+    exec 3>&2 2> /dev/null
+
+    # Collect list of domains to shut down
+    if test "$XENDOMAINS_AUTO_ONLY" = "true"; then
+       rdnames
+    fi
+    echo -n "Shutting down Xen domains:"
+    name=;id=
+    while read LN; do
+       parseln "$LN" || continue
+       if test $id = 0; then continue; fi
+       echo -n " $name"
+       if test "$XENDOMAINS_AUTO_ONLY" = "true"; then
+           eval "
+           case \"\$name\" in
+               ($NAMES)
+                   # nothing
+                   ;;
+               (*)
+                   echo -e '(skip)'
+                   continue
+                   ;;
+           esac
+           "
+       fi
+       # XENDOMAINS_SYSRQ chould be something like just "s"
+       # or "s e i u" or even "s e s i u o"
+       # for the latter, you should set XENDOMAINS_USLEEP to 1200000 or so
+       if test -n "$XENDOMAINS_SYSRQ"; then
+           for sysrq in $XENDOMAINS_SYSRQ; do
+               echo -n "(SR-$sysrq)"
+               XMR=`$CMD sysrq $id $sysrq 2>&1 1>/dev/null`
+               if test $? -ne 0; then
+                   echo -e "\nAn error occurred while doing sysrq on 
domain:\n$XMR\n"
+                   rc_failed $?
+                   echo -n '!'
+               fi
+               # usleep just ignores empty arg
+               usleep $XENDOMAINS_USLEEP
+           done
+       fi
+       if test "$state" = "-b---d" -o "$state" = "-----d"; then
+           echo -n "(zomb)"
+           continue
+       fi
+       if test -n "$XENDOMAINS_MIGRATE"; then
+           echo -n "(migr)"
+           watchdog_xencmd migrate &
+           WDOG_PID=$!
+           XMR=`$CMD migrate $id $XENDOMAINS_MIGRATE 2>&1 1>/dev/null`
+           if test $? -ne 0; then
+               echo -e "\nAn error occurred while migrating domain:\n$XMR\n"
+               rc_failed $?
+               echo -e '!'
+
+               kill $WDOG_PID >/dev/null 2>&1
+           else
+               kill $WDOG_PID >/dev/null 2>&1
+
+               echo -e .
+               usleep 1000
+               continue
+           fi
+       fi
+       if test -n "$XENDOMAINS_SAVE"; then
+           echo -n "(save)"
+           watchdog_xencmd save &
+           WDOG_PID=$!
+           mkdir -p "$XENDOMAINS_SAVE"
+           XMR=`$CMD save $id $XENDOMAINS_SAVE/$name 2>&1 1>/dev/null`
+           if test $? -ne 0; then
+               echo -e "\nAn error occurred while saving domain:\n$XMR\n"
+               rc_failed $?
+               echo -e '!'
+               kill $WDOG_PID >/dev/null 2>&1
+           else
+               kill $WDOG_PID >/dev/null 2>&1
+               echo -e .
+               usleep 1000
+               continue
+           fi
+       fi
+       if test -n "$XENDOMAINS_SHUTDOWN"; then
+           # XENDOMAINS_SHUTDOWN should be "--wait"
+           echo -n "(shut)"
+           watchdog_xencmd shutdown &
+           WDOG_PID=$!
+           XMR=`$CMD shutdown $XENDOMAINS_SHUTDOWN $id 2>&1 1>/dev/null`
+           if test $? -ne 0; then
+               echo -e "\nAn error occurred while shutting down 
domain:\n$XMR\n"
+               rc_failed $?
+               echo -e '!'
+           fi
+           kill $WDOG_PID >/dev/null 2>&1
+       fi
+    done < <($CMD list -l | grep "$LIST_GREP")
+
+    # NB. this shuts down ALL Xen domains (politely), not just the ones in
+    # AUTODIR/*
+    # This is because it's easier to do ;-) but arguably if this script is run
+    # on system shutdown then it's also the right thing to do.
+    if ! all_zombies && test -n "$XENDOMAINS_SHUTDOWN_ALL"; then
+       # XENDOMAINS_SHUTDOWN_ALL should be "--all --wait"
+       echo -n " SHUTDOWN_ALL "
+       watchdog_xencmd shutdown 1 false &
+       WDOG_PID=$!
+       XMR=`$CMD shutdown $XENDOMAINS_SHUTDOWN_ALL 2>&1 1>/dev/null`
+       if test $? -ne 0; then
+           echo -e "\nAn error occurred while shutting down all domains: 
$XMR\n"
+           rc_failed $?
+           echo -e '!'
+       fi
+       kill $WDOG_PID >/dev/null 2>&1
+    fi
+
+    # Unconditionally delete lock file
+    rm -f $LOCKFILE
+
+    exec 2>&3
+}
+
+check_domain_up()
+{
+    name=;id=
+    while read LN; do
+       parseln "$LN" || continue
+       if test $id = 0; then continue; fi
+       case $name in
+           ($1)
+               return 0
+               ;;
+       esac
+    done < <($CMD list -l | grep "$LIST_GREP")
+    return 1
+}
+
+check_all_auto_domains_up()
+{
+    if ! contains_something "$XENDOMAINS_AUTO"
+    then
+      return 0
+    fi
+    missing=
+    for nm in $XENDOMAINS_AUTO/*; do
+       rdname $nm
+       found=0
+       if check_domain_up "$NM"; then
+           echo -n " $name"
+       else
+           missing="$missing $NM"
+       fi
+    done
+    if test -n "$missing"; then
+       echo -n " MISS AUTO:$missing"
+       return 1
+    fi
+    return 0
+}
+
+check_all_saved_domains_up()
+{
+    if ! contains_something "$XENDOMAINS_SAVE"
+    then
+      return 0
+    fi
+    missing=`/bin/ls $XENDOMAINS_SAVE`
+    echo -n " MISS SAVED: " $missing
+    return 1
+}
+
+# This does NOT necessarily restart all running domains: instead it
+# stops all running domains and then boots all the domains specified in
+# AUTODIR.  If other domains have been started manually then they will
+# not get restarted.
+# Commented out to avoid confusion!
+
+restart()
+{
+    stop
+    start
+}
+
+reload()
+{
+    restart
+}
+
+
+case "$1" in
+    start)
+       start
+       rc_status
+       if test -f $LOCKFILE; then rc_status -v; fi
+       ;;
+
+    stop)
+       stop
+       rc_status -v
+       ;;
+
+    restart)
+       restart
+       ;;
+    reload)
+       reload
+       ;;
+
+    status)
+       echo -n "Checking for xendomains:"
+       if test ! -f $LOCKFILE; then
+           rc_failed 3
+       else
+           check_all_auto_domains_up
+           rc_status
+           check_all_saved_domains_up
+           rc_status
+       fi
+       rc_status -v
+       ;;
+
+    *)
+       echo "Usage: $0 {start|stop|restart|reload|status}"
+       rc_failed 3
+       rc_status -v
+       ;;
+esac
+
+rc_exit
-- 
1.9.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.