[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] xen-netback: fix race between napi_complete() and interrupt handler



You forgot to target this patch to "net" tree in subject line.

On Tue, Mar 25, 2014 at 02:08:25PM +0000, David Vrabel wrote:
> When the NAPI budget was not all used, xenvif_poll() would call
> napi_complete() /after/ enabling the interrupt.  This resulted in a
> race between the napi_complete() and the napi_schedule() in the
> interrupt handler.  The use of local_irq_save/restore() avoided by
> race iff the handler is running on the same CPU but not if it was
> running on a different CPU.
> 

OK, I understand this issue now. You mentioned it in the other email
which made me a bit confused.

Just curious, how do you trigger this? By re-binding the interrupt to
another CPU when xenvif_poll is running? I used to run irqbalance (the
one that works with xen virtual interrupt) but could not trigger a race.
Probably the race window is too small to trigger?

> Fix this properly by calling napi_complete() before reenabling
> interrupts (in the xenvif_check_rx_xenvif() call).
> 
> Signed-off-by: David Vrabel <david.vrabel@xxxxxxxxxx>
> ---
>  drivers/net/xen-netback/interface.c |   28 ++--------------------------
>  1 files changed, 2 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/net/xen-netback/interface.c 
> b/drivers/net/xen-netback/interface.c
> index 7669d49..ee322d9 100644
> --- a/drivers/net/xen-netback/interface.c
> +++ b/drivers/net/xen-netback/interface.c
> @@ -65,32 +65,8 @@ static int xenvif_poll(struct napi_struct *napi, int 
> budget)
>       work_done = xenvif_tx_action(vif, budget);
>  
>       if (work_done < budget) {
> -             int more_to_do = 0;
> -             unsigned long flags;
> -
> -             /* It is necessary to disable IRQ before calling
> -              * RING_HAS_UNCONSUMED_REQUESTS. Otherwise we might
> -              * lose event from the frontend.
> -              *
> -              * Consider:
> -              *   RING_HAS_UNCONSUMED_REQUESTS
> -              *   <frontend generates event to trigger napi_schedule>
> -              *   __napi_complete
> -              *
> -              * This handler is still in scheduled state so the
> -              * event has no effect at all. After __napi_complete
> -              * this handler is descheduled and cannot get
> -              * scheduled again. We lose event in this case and the ring
> -              * will be completely stalled.
> -              */
> -
> -             local_irq_save(flags);
> -
> -             RING_FINAL_CHECK_FOR_REQUESTS(&vif->tx, more_to_do);
> -             if (!more_to_do)
> -                     __napi_complete(napi);
> -
> -             local_irq_restore(flags);
> +             napi_complete(napi);

You need to add comment here to say interrupt is in fact "disabled"
before this point, and "enabled" by xenvif_check_rx_xenvif().

> +             xenvif_check_rx_xenvif(vif);

To be honest this function call is not immediately obvious about it's
side effect. I don't mind you copy the code in that function here.

Wei.

>       }
>  
>       return work_done;
> -- 
> 1.7.2.5

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.