Re: [Xen-devel] Dom 0 crash

[Ian Murray <murrayie@xxxxxxxxxxx>]

On 05/11/13 13:16, Jan Beulich wrote:
> > > > On 05.11.13 at 12:58, Ian Murray <murrayie@xxxxxxxxxxx> wrote:
> > I have a recurring crash using Xen 4.3.1-RC2 and Ubuntu 12.04 as Dom0
> > (3.2.0-55-generic). I have software RAID 5 with LVM's. DomU (also 12.04
> > Ubuntu 3.2.0-55 kernel) has a dedicated logical volume, which is being backed
> > up shutting down the DomU, an LVM snapshot being created, restart of DomU and
> > then the snapshot dd'ed to another logical volume. The snapshot is then
> > removed and the second LV is dd'ed to gzip and onto DAT tape.
> >
> > I currently have this running every hour (unless its already running) for
> > testing purposes. After 6-12 runs of this, the Dom0 kernel crashes with he
> > below output.
> >
> > When I preform this booting into the same kernel standalone, the problem
> > does not occur.
> Likely because the action that triggers this doesn't get performed
> in that case?
Thanks for the response.

I am obviously comparing apples and oranges, but I have tried to be as 
similar as possible in as much as I have limited kernel memory to 512M 
as I do with Dom0 and have used a background task writing /dev/urandom 
to the LV that the domU would normally be using. The only difference is 
that it isn't running under Xen and I don't have a domU running in the 
background. I will repeat the exercise with no domU running, but under Xen.

> > Can anyone please suggest what I am doing wrong or identify if it is bug?
> Considering that exception address ...
>
> > RIP: e030:[<ffffffff8142655d>]  [<ffffffff8142655d>] 
> > scsi_dispatch_cmd+0x6d/0x2e0
> ... and call stack ...
>
> > [24149.786311] Call Trace:
> > [24149.786315]  <IRQ>
> > [24149.786323]  [<ffffffff8142da62>] scsi_request_fn+0x3a2/0x470
> > [24149.786333]  [<ffffffff812f1a28>] blk_run_queue+0x38/0x60
> > [24149.786339]  [<ffffffff8142c416>] scsi_run_queue+0xd6/0x1b0
> > [24149.786347]  [<ffffffff8142e822>] scsi_next_command+0x42/0x60
> > [24149.786354]  [<ffffffff8142ea52>] scsi_io_completion+0x1b2/0x630
> > [24149.786363]  [<ffffffff816611fe>] ? _raw_spin_unlock_irqrestore+0x1e/0x30
> > [24149.786371]  [<ffffffff81424b5c>] scsi_finish_command+0xcc/0x130
> > [24149.786378]  [<ffffffff8142e7ae>] scsi_softirq_done+0x13e/0x150
> > [24149.786386]  [<ffffffff812fb6b3>] blk_done_softirq+0x83/0xa0
> > [24149.786394]  [<ffffffff8106fa38>] __do_softirq+0xa8/0x210
> > [24149.786402]  [<ffffffff8166ba6c>] call_softirq+0x1c/0x30
> > [24149.786410]  [<ffffffff810162f5>] do_softirq+0x65/0xa0
> > [24149.786416]  [<ffffffff8106fe1e>] irq_exit+0x8e/0xb0
> > [24149.786428]  [<ffffffff813aecd5>] xen_evtchn_do_upcall+0x35/0x50
> > [24149.786436]  [<ffffffff8166babe>] xen_do_hypervisor_callback+0x1e/0x30
> > [24149.786441]  <EOI>
> > [24149.786449]  [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000
> > [24149.786456]  [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000
> > [24149.786464]  [<ffffffff8100a500>] ? xen_safe_halt+0x10/0x20
> > [24149.786472]  [<ffffffff8101c913>] ? default_idle+0x53/0x1d0
> > [24149.786478]  [<ffffffff81013236>] ? cpu_idle+0xd6/0x120
> ... point into the SCSI subsystem, this is likely the wrong list to
> ask for help on.
... but the right list to confirm that I am on the wrong list? :)

Seriously, the specific evidence may suggest it's a non-Xen issue/bug, 
but Xen is the only measurable/visible difference so far.  I referred it 
to this list because here the demarcation between hypervisor, PVOPS and 
regular kernel code interaction is likely best understood.
Thanks again for your response.

> Jan

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel