[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] DomU creation failure for Xen-ARM

Hi Julien,

On Tue, Oct 29, 2013 at 7:06 PM, Julien Grall <julien.grall@xxxxxxxxxx> wrote:
> On 10/28/2013 06:07 PM, Vaibhav Bedia wrote:
>> On Sun, Oct 27, 2013 at 5:15 PM, Vaibhav Bedia <vaibhav.bedia@xxxxxxxxx>
>> wrote:
>>> Hi,
>>> By putting some stupid workaround in dist-tools creation step as
>>> reported earlier
>>> i now have a Ubuntu ARM system running on OMAP5 Dom0.
>> I finally got a couple of DomUs using a ramdisk running on OMAP5 :)
>> The problem was due to the dtb for DomU allocating only 32MB of memory.
>> Once i increased that the error reported earlier went away.
>> The comment in xenvm-4.2.dts in the kernel seems to suggest the memory
>> node gets updated
>> memory@80000000 {
>>          device_type = "memory";
>>          /* this field is going to be adjusted by the hypervisor */
>>          reg = <0 0x80000000 0 0x08000000>;
>> };
>> Is there some config option to get this working as expected?
> Not yet. Ian Campbell is working on the auto-generation of domU device tree.
> For now, if you want to change the amount of memory, you need to modify the
> device tree yourself and xl configuration file.

Ok. It took me some time to figure out why a change in the xl configuration file
was not taking effect. What do you think about increasing the default
value in the
device tree for now?


Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.