Re: [Xen-devel] XEN 4.3.0 WINDOWS HVM 3GB RAM ISSUE

["NiX" <nix@xxxxxxxxxxxxxxxx>]

>
>
> For what it's worth, im successfully booting 64-bit Win7 and 2008R2
> systems w/ more than 4GB of RAM on 4.3.1-rc1 in HVM.
>
>
> This may have been patched?
>
>
> This is on a 'debian jessie' system.  also amd64.

I've no problems to start Win7/2008R2 with more than 4GB of RAM on my AMD
1090T in HVM but this issue still persist on the server described in 1st
post under this subject.

I tried today Xen 4.3.1-rc2 but it ended up with the same error. I am
afraid many older XEON/Server Motherboard platforms are affected by this
bug as well.

>
>
>
>>>> "NiX"  10/22/13 3:05 PM >>>
> Hello list!
>
> ----------------------------------------------------------------------------------------------------
> The problem
> ----------------------------------------------------------------------------------------------------
>
> Windows 7 64bit nor Windows 2008 R2 Enterprise Server 64bit is not
> starting with more than 3GB of RAM in HVM mode
>
> As a reference:
>
> Ubuntu 64-bit server is starting without any issue with 5GB of RAM on this
> server in HVM mode
> And all PV guest can use as much RAM as available when using 64bit linux.
>
> ----------------------------------------------------------------------------------------------------
>
> System:
>> > CPU's: 2 x XEON X5450
>> > Motherboard: Intel Server Board S5000PSLSASR
>> > http://ark.intel.com/products/46544/Intel-Server-Board-S5000PSLSASR
>
>> > RAM: 16GB DDR2 ECC
>> > Dom0 OS: Debian 7.0 64bit
>
> ----------------------------------------------------------------------------------------------------
>
> xl create 10.100.12.10.cfg
> Parsing config from 10.100.12.10.cfg
> xc: info: VIRTUAL MEMORY ARRANGEMENT:
>   Loader:        0000000000100000->000000000019ee68
>   Modules:       0000000000000000->0000000000000000
>   TOTAL:         0000000000000000->00000000ff000000
>   ENTRY ADDRESS: 0000000000100000
> xc: info: PHYSICAL MEMORY ALLOCATION:
>   4KB PAGES: 0x000000000000f600
>   2MB PAGES: 0x000000000000077d
>   1GB PAGES: 0x0000000000000000
> xc: error: panic: xc_dom_boot.c:388: xc_dom_gnttab_hvm_seed: failed to add
> gnttab to physmap [errno=22]
> : Internal error
> libxl: error: libxl_dm.c:1275:device_model_spawn_outcome: domain 11 device
> model: spawn failed (rc=-3)
> libxl: error: libxl_create.c:1075:domcreate_devmodel_started: device model
> did not start: -3
> libxl: error: libxl_dm.c:1306:libxl__destroy_device_model: Device Model
> already exited
>
> ----------------------------------------------------------------------------------------------------
> VM config
> ----------------------------------------------------------------------------------------------------
>
> cat 10.100.12.10.cfg
> builder="hvm"
> vcpus=1
> memory=4096
> name="10.100.12.10"
>
> # rtl8139 e1000
>
> vif = [
> "type=ioemu,ip=10.100.12.10,mac=00:16:3E:E6:7E:48,bridge=br0,model=e1000,rate=100Mb/s"
> ]
> disk = [ "raw:/home/servers/xen/images/10.100.12.10.img,ioemu:hda,w" ]
>
> boot="c"
>
> serial="pty"
> usbdevice="tablet"
>
> sdl=0
> vnc=1
> vncpasswd="sesame"
> vnclisten="10.100.12.10"
> vncdisplay=10
> vncconsole=1
> monitor=1
>
> pae=1
> acpi=1
> apic=1
> localtime=0
> xen_platform_pci=1
> stdvga=1
> videoram=16
> gfx_passthru=0
>
> shadow_memory=8
>
> on_poweroff="destroy"
> on_reboot="restart"
> on_crash="restart"
>
>
> ----------------------------------------------------------------------------------------------------
> xl dmesg
> ----------------------------------------------------------------------------------------------------
>  __  __            _  _    _____  ___
>  \ \/ /___ _ __   | || |  |___ / / _ \
>   \  // _ \ '_ \  | || |_   |_ \| | | |
>   /  \  __/ | | | |__   _| ___) | |_| |
>  /_/\_\___|_| |_|    |_|(_)____(_)___/
>
> (XEN) Xen version 4.3.0 (root@) (gcc (Debian 4.7.2-5) 4.7.2) debug=n Thu
> Jul 18 02:23:36 EEST 2013
> (XEN) Latest ChangeSet:
> (XEN) Bootloader: GRUB 1.99-27+deb7u1
> (XEN) Command line: placeholder
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: V2; EDID transfer time: 2 seconds
> (XEN) Disc information:
> (XEN)  Found 5 MBR signatures
> (XEN)  Found 5 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009b000 (usable)
> (XEN)  000000000009b000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 00000000df91a000 (usable)
> (XEN)  00000000df91a000 - 00000000df9d1000 (ACPI NVS)
> (XEN)  00000000df9d1000 - 00000000dfa32000 (usable)
> (XEN)  00000000dfa32000 - 00000000dfa9a000 (reserved)
> (XEN)  00000000dfa9a000 - 00000000dfab4000 (usable)
> (XEN)  00000000dfab4000 - 00000000dfb1a000 (ACPI NVS)
> (XEN)  00000000dfb1a000 - 00000000dfb28000 (usable)
> (XEN)  00000000dfb28000 - 00000000dfb3a000 (ACPI data)
> (XEN)  00000000dfb3a000 - 00000000dfc00000 (usable)
> (XEN)  00000000dfc00000 - 00000000f0000000 (reserved)
> (XEN)  00000000ffc00000 - 00000000ffc0c000 (reserved)
> (XEN)  0000000100000000 - 0000000420000000 (usable)
> (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL )
> (XEN) ACPI: XSDT DFB39120, 0074 (r1 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: FACP DFB37000, 00F4 (r3 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: DSDT DFB30000, 5809 (r2 INTEL  S5000PSL        1 INTL
> 1000013)
> (XEN) ACPI: FACS DFAB4000, 0040
> (XEN) ACPI: APIC DFB36000, 00C8 (r1 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: SPCR DFB2F000, 0050 (r1 INTEL  S5000PSL        0 INTL
> 1000013)
> (XEN) ACPI: HPET DFB2E000, 0038 (r1 INTEL  S5000PSL        1 INTL
> 1000013)
> (XEN) ACPI: MCFG DFB2D000, 003C (r1 INTEL  S5000PSL        1 INTL
> 1000013)
> (XEN) ACPI: SSDT DFB2C000, 0193 (r2  INTEL IPMI         4000 INTL
> 20060317)
> (XEN) ACPI: HEST DFB2B000, 00A8 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) ACPI: BERT DFB2A000, 0030 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) ACPI: ERST DFB29000, 0230 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) ACPI: EINJ DFB28000, 0130 (r1 INTEL  S5000PSL        1 INTL
> 1)
> (XEN) System RAM: 16378MB (16771088kB)
> (XEN) Domain heap initialised
> (XEN) Processor #0 7:7 APIC version 20
> (XEN) Processor #2 7:7 APIC version 20
> (XEN) Processor #4 7:7 APIC version 20
> (XEN) Processor #6 7:7 APIC version 20
> (XEN) Processor #1 7:7 APIC version 20
> (XEN) Processor #3 7:7 APIC version 20
> (XEN) Processor #5 7:7 APIC version 20
> (XEN) Processor #7 7:7 APIC version 20
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2992.544 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) xstate_init: using cntxt_size: 0x240 and states: 0x3
> (XEN) I/O virtualisation disabled
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using new ACK method
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Allocated console ring of 16 KiB.
> (XEN) VMX: Supported advanced features:
> (XEN)  - APIC MMIO access virtualisation
> (XEN)  - APIC TPR shadow
> (XEN)  - Virtual NMI
> (XEN)  - MSR direct-access bitmap
> (XEN) HVM: ASIDs disabled.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging (HAP) not detected
> (XEN) Brought up 8 CPUs
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1e00000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   000000040c000000->0000000410000000 (4095144 pages to
> be allocated)
> (XEN)  Init. ramdisk: 000000041fa87000->000000041ffff400
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: ffffffff81000000->ffffffff81e00000
> (XEN)  Init. ramdisk: ffffffff81e00000->ffffffff82378400
> (XEN)  Phys-Mach map: ffffffff82379000->ffffffff842da108
> (XEN)  Start info:    ffffffff842db000->ffffffff842db4b4
> (XEN)  Page tables:   ffffffff842dc000->ffffffff84301000
> (XEN)  Boot stack:    ffffffff84301000->ffffffff84302000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff84400000
> (XEN)  ENTRY ADDRESS: ffffffff819911c0
> (XEN) Dom0 has maximum 8 VCPUs
> (XEN) Scrubbing Free RAM: .done.
> (XEN) Initial low memory virq threshold set at 0x4000 pages.
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
> to Xen)
> (XEN) Freed 268kB init memory.
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) d3v0: bogus time -278955677 (offsets -51582545571/0)
> (XEN) printk: 3665 messages suppressed.
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) d7v0: bogus time -453505508 (offsets -86265135857158/0)
> (XEN) printk: 2079 messages suppressed.
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) d8v0: bogus time -65361922 (offsets -87382874957166/0)
> (XEN) common.c:1598: d10 failed to allocate from shadow
> pool<2>memory.c:132:d0 Could not allocate order=9 extent: id=10
> memflags=0 (2 of 4)
> (XEN) printk: 11634 messages suppressed.
> (XEN) grant_table.c:350:d0 Bad flags (0) or dom (0). (expected dom 0)
> (XEN) common.c:1598: d11 failed to allocate from shadow
> pool<2>memory.c:132:d0 Could not allocate order=9 extent: id=11
> memflags=0 (2 of 4)
> (XEN) grant_table.c:350:d0 Bad flags (0) or dom (0). (expected dom 0)
>
> ----------------------------------------------------------------------------------------------------
> xl info
> ----------------------------------------------------------------------------------------------------
>
> xl info
> host                   : nix
> release                : 3.2.51-grsec
> version                : #1 SMP Fri Sep 13 00:26:20 EEST 2013
> machine                : x86_64
> nr_cpus                : 8
> max_cpu_id             : 7
> nr_nodes               : 1
> cores_per_socket       : 4
> threads_per_core       : 1
> cpu_mhz                : 2992
> hw_caps                :
> bfebfbff:20100800:00000000:00000900:040ce3bd:00000000:00000001:00000000
> virt_caps              : hvm
> total_memory           : 16378
> free_memory            : 6473
> sharing_freed_memory   : 0
> sharing_used_memory    : 0
> outstanding_claims     : 0
> free_cpus              : 0
> xen_major              : 4
> xen_minor              : 3
> xen_extra              : .0
> xen_caps               : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32
> hvm-3.0-x86_32p hvm-3.0-x86_64
> xen_scheduler          : credit
> xen_pagesize           : 4096
> platform_params        : virt_start=0xffff800000000000
> xen_changeset          :
> xen_commandline        : placeholder
> cc_compiler            : gcc (Debian 4.7.2-5) 4.7.2
> cc_compile_by          : root
> cc_compile_domain      :
> cc_compile_date        : Thu Jul 18 02:23:36 EEST 2013
> xend_config_format     : 4
>
> ----------------------------------------------------------------------------------------------------
> cat /var/log/dmesg
> ----------------------------------------------------------------------------------------------------
>
>
> 7>pnp 00:00: [mem 0xfe700000-0xfe7003ff window]
> pnp 00:00: [mem 0xfed40000-0xfed44fff window]
> pnp 00:00: [mem 0xf20000000-0xfffffffff window]
> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> pnp 00:01: [mem 0xe0000000-0xefffffff]
> pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
> pnp 00:01: [mem 0xffc00000-0xffffffff]
> pnp 00:01: [mem 0xfec00000-0xfecfffff]
> pnp 00:01: [mem 0xfee00000-0xfeefffff]
> pnp 00:01: [mem 0xfe600000-0xfe6fffff]
> pnp 00:01: [mem 0xfe000000-0xfe01ffff]
> pnp 00:01: [mem 0x00000000-0x0009ffff]
> system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
> system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
> system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
> system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
> system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
> system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved
> system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved
> system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
> system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:02: [io  0x0000-0x000f]
> pnp 00:02: [io  0x0081-0x0083]
> pnp 00:02: [io  0x0087]
> pnp 00:02: [io  0x0089-0x008b]
> pnp 00:02: [io  0x008f]
> pnp 00:02: [io  0x00c0-0x00df]
> pnp 00:02: [dma 4]
> pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
> pnp 00:03: [io  0x0070-0x0071]
> pnp 00:03: [io  0x0074-0x0077]
> xen: registering gsi 8 triggering 1 polarity 0
> pnp 00:03: [irq 8]
> pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> pnp 00:04: [io  0x00f0-0x00ff]
> xen: registering gsi 13 triggering 1 polarity 0
> pnp 00:04: [irq 13]
> pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> pnp 00:05: [io  0x0061]
> pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
> pnp 00:06: [io  0x0500-0x053f]
> pnp 00:06: [io  0x0400-0x047f]
> pnp 00:06: [io  0x0092]
> pnp 00:06: [io  0x0800-0x087f]
> pnp 00:06: [io  0x0010-0x001f]
> pnp 00:06: [io  0x0072-0x0073]
> pnp 00:06: [io  0x0080]
> pnp 00:06: [io  0x0084-0x0086]
> pnp 00:06: [io  0x0088]
> pnp 00:06: [io  0x008c-0x008e]
> pnp 00:06: [io  0x0090-0x009f]
> pnp 00:06: [io  0x0ca0-0x0caf]
> pnp 00:06: [io  0x0161]
> pnp 00:06: [io  0x0162]
> system 00:06: [io  0x0500-0x053f] has been reserved
> system 00:06: [io  0x0400-0x047f] has been reserved
> system 00:06: [io  0x0800-0x087f] has been reserved
> system 00:06: [io  0x0ca0-0x0caf] could not be reserved
> system 00:06: [io  0x0161] has been reserved
> system 00:06: [io  0x0162] has been reserved
> system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> xen: registering gsi 12 triggering 1 polarity 0
> pnp 00:07: [irq 12]
> pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
> pnp 00:08: [io  0x0060]
> pnp 00:08: [io  0x0064]
> xen: registering gsi 1 triggering 1 polarity 0
> pnp 00:08: [irq 1]
> pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> pnp 00:09: [io  0x03f8-0x03ff]
> xen: registering gsi 4 triggering 1 polarity 0
> pnp 00:09: [irq 4]
> pnp 00:09: [dma 0 disabled]
> pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
> pnp 00:0a: [io  0x02f8-0x02ff]
> xen: registering gsi 3 triggering 1 polarity 0
> pnp 00:0a: [irq 3]
> pnp 00:0a: [dma 0 disabled]
> pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
> pnp 00:0b: [mem 0xfed00000-0xfed003ff]
> pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
> pnp 00:0c: [mem 0xfec00000-0xfec000ff]
> pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active)
> pnp 00:0d: [io  0x0ca2]
> pnp 00:0d: [io  0x0ca3]
> pnp 00:0d: Plug and Play ACPI device, IDs IPI0001 (active)
> pnp: PnP ACPI: found 14 devices
> ACPI: ACPI bus type pnp unregistered
> PM-Timer failed consistency check  (0x0xffffff) - aborting.
> pci 0000:04:00.0: no compatible bridge window for [mem
> 0xffe00000-0xffffffff pref]
> pci 0000:0d:0c.0: no compatible bridge window for [mem
> 0xfffe0000-0xffffffff pref]
> PCI: max bus depth: 3 pci_try_num: 4
> pci 0000:00:02.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref]
> pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff]
> pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9200000-0xf93fffff 64bit pref]
> pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
> pci 0000:01:00.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref]
> pci 0000:02:01.0: BAR 15: assigned [mem 0xf8e00000-0xf8ffffff pref]
> pci 0000:02:00.0: PCI bridge to [bus 03-03]
> pci 0000:04:00.0: BAR 6: assigned [mem 0xf8e00000-0xf8ffffff pref]
> pci 0000:02:01.0: PCI bridge to [bus 04-04]
> pci 0000:02:01.0:   bridge window [io  0x3000-0x3fff]
> pci 0000:02:01.0:   bridge window [mem 0xf8900000-0xf89fffff]
> pci 0000:02:01.0:   bridge window [mem 0xf8e00000-0xf8ffffff pref]
> pci 0000:02:02.0: PCI bridge to [bus 05-05]
> pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]
> pci 0000:02:02.0:   bridge window [mem 0xf8000000-0xf88fffff]
> pci 0000:01:00.0: PCI bridge to [bus 02-05]
> pci 0000:01:00.0:   bridge window [io  0x2000-0x3fff]
> pci 0000:01:00.0:   bridge window [mem 0xf8000000-0xf89fffff]
> pci 0000:01:00.0:   bridge window [mem 0xf8e00000-0xf8ffffff pref]
> pci 0000:01:00.3: PCI bridge to [bus 06-06]
> pci 0000:00:02.0: PCI bridge to [bus 01-06]
> pci 0000:00:02.0:   bridge window [io  0x2000-0x3fff]
> pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xf8afffff]
> pci 0000:00:02.0:   bridge window [mem 0xf8e00000-0xf8ffffff pref]
> pci 0000:00:03.0: PCI bridge to [bus 07-07]
> pci 0000:00:04.0: PCI bridge to [bus 08-08]
> pci 0000:00:05.0: PCI bridge to [bus 09-09]
> pci 0000:00:06.0: PCI bridge to [bus 0a-0a]
> pci 0000:00:07.0: PCI bridge to [bus 0b-0b]
> pci 0000:00:1c.0: PCI bridge to [bus 0c-0c]
> pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
> pci 0000:00:1c.0:   bridge window [mem 0xf9000000-0xf91fffff]
> pci 0000:00:1c.0:   bridge window [mem 0xf9200000-0xf93fffff 64bit pref]
> pci 0000:0d:0c.0: BAR 6: assigned [mem 0xf8b20000-0xf8b3ffff pref]
> pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
> pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
> pci 0000:00:1e.0:   bridge window [mem 0xf8b00000-0xf8bfffff]
> pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
> xen: registering gsi 16 triggering 0 polarity 1
> xen: --> pirq=16 -> irq=16 (gsi=16)
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:01:00.0: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:02:00.0: setting latency timer to 64
> xen: registering gsi 17 triggering 0 polarity 1
> xen: --> pirq=17 -> irq=17 (gsi=17)
> pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:02:01.0: setting latency timer to 64
> xen: registering gsi 18 triggering 0 polarity 1
> xen: --> pirq=18 -> irq=18 (gsi=18)
> pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> pci 0000:02:02.0: setting latency timer to 64
> pci 0000:01:00.3: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:03.0: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:04.0: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:05.0: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:06.0: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:07.0: setting latency timer to 64
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1e.0: setting latency timer to 64
> pci_bus 0000:00: resource 4 [io  0x0000-0x0ca1]
> pci_bus 0000:00: resource 5 [io  0x0ca4-0x0cf7]
> pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
> pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000fffff]
> pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfdffffff]
> pci_bus 0000:00: resource 10 [mem 0xfe700000-0xfe7003ff]
> pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff]
> pci_bus 0000:00: resource 12 [mem 0xf20000000-0xfffffffff]
> pci_bus 0000:01: resource 0 [io  0x2000-0x3fff]
> pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf8afffff]
> pci_bus 0000:01: resource 2 [mem 0xf8e00000-0xf8ffffff pref]
> pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
> pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf89fffff]
> pci_bus 0000:02: resource 2 [mem 0xf8e00000-0xf8ffffff pref]
> pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
> pci_bus 0000:04: resource 1 [mem 0xf8900000-0xf89fffff]
> pci_bus 0000:04: resource 2 [mem 0xf8e00000-0xf8ffffff pref]
> pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
> pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf88fffff]
> pci_bus 0000:0c: resource 0 [io  0x5000-0x5fff]
> pci_bus 0000:0c: resource 1 [mem 0xf9000000-0xf91fffff]
> pci_bus 0000:0c: resource 2 [mem 0xf9200000-0xf93fffff 64bit pref]
> pci_bus 0000:0d: resource 0 [io  0x1000-0x1fff]
> pci_bus 0000:0d: resource 1 [mem 0xf8b00000-0xf8bfffff]
> pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
> pci_bus 0000:0d: resource 4 [io  0x0000-0x0ca1]
> pci_bus 0000:0d: resource 5 [io  0x0ca4-0x0cf7]
> pci_bus 0000:0d: resource 6 [io  0x0d00-0xffff]
> pci_bus 0000:0d: resource 7 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:0d: resource 8 [mem 0x000c0000-0x000fffff]
> pci_bus 0000:0d: resource 9 [mem 0xf0000000-0xfdffffff]
> pci_bus 0000:0d: resource 10 [mem 0xfe700000-0xfe7003ff]
> pci_bus 0000:0d: resource 11 [mem 0xfed40000-0xfed44fff]
> pci_bus 0000:0d: resource 12 [mem 0xf20000000-0xfffffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> UDP hash table entries: 8192 (order: 6, 262144 bytes)
> UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> xen: registering gsi 23 triggering 0 polarity 1
> xen: --> pirq=23 -> irq=23 (gsi=23)
> pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> pci 0000:00:1d.0: PCI INT A disabled
> xen: registering gsi 22 triggering 0 polarity 1
> xen: --> pirq=22 -> irq=22 (gsi=22)
> pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
> pci 0000:00:1d.1: PCI INT B disabled
> xen: registering gsi 23 triggering 0 polarity 1
> Already setup the GSI :23
> pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
> pci 0000:00:1d.2: PCI INT C disabled
> xen: registering gsi 22 triggering 0 polarity 1
> Already setup the GSI :22
> pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
> pci 0000:00:1d.3: PCI INT D disabled
> xen: registering gsi 23 triggering 0 polarity 1
> Already setup the GSI :23
> pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> pci 0000:00:1d.7: PCI INT A disabled
> pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
> pci 0000:0d:0c.0: Boot video device
> PCI: CLS 64 bytes, default 64
> Trying to unpack rootfs image as initramfs...
> Freeing initrd memory: 5604k freed
> kvm: no hardware support
> has_svm: not amd
> kvm: no hardware support
> Intel AES-NI instructions are not detected.
> sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
> audit: initializing netlink socket (disabled)
> type=2000 audit(1382382053.483:1): initialized
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> NTFS driver 2.1.30 [Flags: R/W DEBUG].
> SGI XFS with ACLs, security attributes, realtime, large block/inode
> numbers, no debug enabled
> SGI XFS Quota Management subsystem
> msgmni has been set to 30319
> async_tx: api initialized (async)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pcieport 0000:00:1c.0: setting latency timer to 64
> vga16fb: initializing
> vga16fb: mapped to 0xffff8800000a0000
> Console: switching to colour frame buffer device 80x30
> fb0: VGA16 VGA frame buffer device
> input: Sleep Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
> ACPI: Sleep Button [SLPB]
> input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> ACPI: Power Button [PWRB]
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> ACPI: Power Button [PWRF]
> ioatdma: Intel(R) QuickData Technology Driver 4.00
> xen: registering gsi 16 triggering 0 polarity 1
> Already setup the GSI :16
> ioatdma 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> ioatdma 0000:00:08.0: setting latency timer to 64
> Event-channel device installed.
> xen-pciback: backend is vpci
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> hpet_acpi_add: no address or irqs in _CRS
> intel_rng: Firmware space is locked read-only. If you can't or
> intel_rng: don't want to disable this in firmware setup, and if
> intel_rng: you are certain that your system has a functional
> intel_rng: RNG, try using the 'no_fwh_detect' option.
> Linux agpgart interface v0.103
> ipmi message handler version 39.2
> ipmi device interface
> IPMI System Interface driver.
> ipmi_si: probing via ACPI
> ipmi_si 00:0d: [io  0x0ca2] regsize 1 spacing 1 irq 0
> ipmi_si: Adding ACPI-specified kcs state machine
> ipmi_si: probing via SMBIOS
> ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
> ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
> ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2,
> slave address 0x0, irq 0
> ipmi_si 00:0d: Found new BMC (man_id: 0x000157, prod_id: 0x0029, dev_id:
> 0x20)
> ipmi_si 00:0d: IPMI kcs interface initialized
> IPMI Watchdog: driver initialized
> Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
> IPMI poweroff: ATCA Detect mfg 0x157 prod 0x29
> IPMI poweroff: Found a chassis style poweroff function
> Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is
> 60 seconds).
> Hangcheck: Using getrawmonotonic().
> brd: module loaded
> Uniform Multi-Platform E-IDE driver
> piix 0000:00:1f.1: IDE controller (0x8086:0x269e rev 0x09)
> xen: registering gsi 20 triggering 0 polarity 1
> xen: --> pirq=20 -> irq=20 (gsi=20)
> pci 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x40c0-0x40c7
>     ide1: BM-DMA at 0x40c8-0x40cf
> Probing IDE interface ide0...
> hda: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/33 mode selected
> Probing IDE interface ide1...
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> ide_generic: please use "probe_mask=0x3f" module parameter for probing all
> legacy ISA IDE ports
> ide-gd driver 1.18
> ide-cd driver 5.00
> ide-cd: hda: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
> cdrom: Uniform CD-ROM driver Revision: 3.20
> rdac: device handler registered
> SCSI Media Changer driver v0.25
> ahci 0000:00:1f.2: version 3.0
> xen: registering gsi 20 triggering 0 polarity 1
> Already setup the GSI :20
> ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
> ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA
> mode
> ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
> ahci 0000:00:1f.2: setting latency timer to 64
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata1: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00100 irq 20
> ata2: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00180 irq 20
> ata3: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00200 irq 20
> ata4: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00280 irq 20
> ata5: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00300 irq 20
> ata6: SATA max UDMA/133 abar m1024@0xf8c00000 port 0xf8c00380 irq 20
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky
> e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
> e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> xen: registering gsi 18 triggering 0 polarity 1
> Already setup the GSI :18
> e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> e1000e 0000:05:00.0: setting latency timer to 64
> e1000e 0000:05:00.0: eth0: (PCI Express:2.5GT/s:Width x4)
> 00:15:17:98:fd:34
> e1000e 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection
> e1000e 0000:05:00.0: eth0: MAC: 5, PHY: 5, PBA No: 400000-000
> xen: registering gsi 19 triggering 0 polarity 1
> xen: --> pirq=19 -> irq=19 (gsi=19)
> e1000e 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> e1000e 0000:05:00.1: setting latency timer to 64
> e1000e 0000:05:00.1: eth1: (PCI Express:2.5GT/s:Width x4)
> 00:15:17:98:fd:35
> e1000e 0000:05:00.1: eth1: Intel(R) PRO/1000 Network Connection
> e1000e 0000:05:00.1: eth1: MAC: 5, PHY: 5, PBA No: 400000-000
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> xen: registering gsi 23 triggering 0 polarity 1
> Already setup the GSI :23
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8c00400
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 3.2.51-grsec ehci_hcd
> usb usb1: SerialNumber: 0000:00:1d.7
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> xen: registering gsi 23 triggering 0 polarity 1
> Already setup the GSI :23
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: UHCI Host Controller
> usb usb2: Manufacturer: Linux 3.2.51-grsec uhci_hcd
> usb usb2: SerialNumber: 0000:00:1d.0
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> xen: registering gsi 22 triggering 0 polarity 1
> Already setup the GSI :22
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004080
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 3.2.51-grsec uhci_hcd
> usb usb3: SerialNumber: 0000:00:1d.1
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> xen: registering gsi 23 triggering 0 polarity 1
> Already setup the GSI :23
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: irq 23, io base 0x00004060
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 3.2.51-grsec uhci_hcd
> usb usb4: SerialNumber: 0000:00:1d.2
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> xen: registering gsi 22 triggering 0 polarity 1
> Already setup the GSI :22
> uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
> uhci_hcd 0000:00:1d.3: setting latency timer to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 22, io base 0x00004040
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> usb usb5: Manufacturer: Linux 3.2.51-grsec uhci_hcd
> usb usb5: SerialNumber: 0000:00:1d.3
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> sl811: driver sl811-hcd, 19 May 2005
> r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
> Initializing USB Mass Storage driver...
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new interface driver libusual
> usbcore: registered new interface driver ums-alauda
> usbcore: registered new interface driver ums-cypress
> usbcore: registered new interface driver ums-datafab
> usbcore: registered new interface driver ums-freecom
> usbcore: registered new interface driver ums-isd200
> usbcore: registered new interface driver ums-jumpshot
> usbcore: registered new interface driver ums-karma
> usbcore: registered new interface driver ums-onetouch
> usbcore: registered new interface driver ums-sddr09
> usbcore: registered new interface driver ums-sddr55
> usbcore: registered new interface driver ums-usbat
> i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq
> 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mousedev: PS/2 mouse device common for all mice
> rtc_cmos 00:03: RTC can wake from S4
> rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, y3k, 114 bytes nvram
> i2c /dev entries driver
> xen: registering gsi 20 triggering 0 polarity 1
> Already setup the GSI :20
> i801_smbus 0000:00:1f.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
> w83627hf: w83627hf: Unsupported chip (DEVID=0xf2)
> ata4: SATA link down (SStatus 0 SControl 300)
> ata5: SATA link down (SStatus 0 SControl 300)
> ata3: SATA link down (SStatus 0 SControl 300)
> ata6: SATA link down (SStatus 0 SControl 300)
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
> ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> ata2.00: ATA-8: ST3500418AS, CC38, max UDMA/133
> ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX4      1.5  PQ: 0 ANSI:
> 5
> sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> ata2.00: configured for UDMA/133
> scsi 1:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI:
> 5
>  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> sd 1:0:0:0: [sdb] Write Protect is off
> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 1:0:0:0: Attached scsi generic sg1 type 0
> sd 0:0:0:0: [sda] Attached SCSI disk
>  sdb: sdb1
> sd 1:0:0:0: [sdb] Attached SCSI disk
> pc87360: PC8736x not detected, module not inserted
> pc87427: Logical device 0x09 not activated
> pc87427: Logical device 0x14 not activated
> w83627ehf: unsupported chip ID: 0xf211
> md: linear personality registered for level -1
> md: raid0 personality registered for level 0
> md: raid1 personality registered for level 1
> md: raid10 personality registered for level 10
> md: raid6 personality registered for level 6
> md: raid5 personality registered for level 5
> md: raid4 personality registered for level 4
> md: multipath personality registered for level -4
> device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
> dm-devel@xxxxxxxxxx
> device-mapper: multipath: version 1.3.1 loaded
> device-mapper: multipath round-robin: version 1.0.0 loaded
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> GACT probability on
> Mirror/redirect action on
> Failed to load ipt action
> netem: version 1.3
> u32 classifier
>     Performance counters on
>     input device check on
>     Actions configured
> Netfilter messages via NETLINK v0.30.
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> xt_time: kernel timezone is -0000
> IPv4 over IPv4 tunneling driver
> ip_tables: (C) 2000-2006 Netfilter Core Team
> arp_tables: (C) 2002 David S. Miller
> TCP bic registered
> TCP cubic registered
> TCP westwood registered
> TCP highspeed registered
> TCP hybla registered
> TCP htcp registered
> TCP vegas registered
> TCP veno registered
> TCP scalable registered
> TCP lp registered
> TCP yeah registered
> TCP illinois registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> Bridge firewalling registered
> Ebtables v2.0 registered
> 8021q: 802.1Q VLAN Support v1.8
> Registering the dns_resolver key type
> registered taskstats version 1
> rtc_cmos 00:03: setting system clock to 2013-10-21 19:00:56 UTC
> (1382382056)
> Freeing unused kernel memory: 592k freed
> Fusion MPT base driver 3.04.20
> Copyright (c) 1999-2008 LSI Corporation
> Fusion MPT SAS Host driver 3.04.20
> xen: registering gsi 17 triggering 0 polarity 1
> Already setup the GSI :17
> mptsas 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> mptbase: ioc0: Initiating bringup
> ioc0: LSISAS1064E B2: Capabilities={Initiator}
> mptsas 0000:04:00.0: setting latency timer to 64
> scsi6 : ioc0: LSISAS1064E B2, FwRev=011bbe00h, Ports=1, MaxQ=483, IRQ=17
> mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0,
> sas_addr 0x1221000000000000
> scsi 6:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI:
> 5
> sd 6:0:0:0: Attached scsi generic sg2 type 0
> mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr
> 0x5000c50055c67079
> sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> scsi 6:0:1:0: Direct-Access     SEAGATE  ST1000NM0001     0002 PQ: 0 ANSI:
> 6
> sd 6:0:1:0: Attached scsi generic sg3 type 0
> sd 6:0:1:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr
> 0x5000c50055c629c9
> scsi 6:0:2:0: Direct-Access     SEAGATE  ST1000NM0001     0002 PQ: 0 ANSI:
> 6
> sd 6:0:1:0: [sdd] Write Protect is off
> sd 6:0:1:0: [sdd] Mode Sense: d7 00 10 08
> sd 6:0:2:0: Attached scsi generic sg4 type 0
> sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO
> and FUA
> sd 6:0:2:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> sd 6:0:2:0: [sde] Write Protect is off
> sd 6:0:2:0: [sde] Mode Sense: d7 00 10 08
> sd 6:0:2:0: [sde] Write cache: enabled, read cache: enabled, supports DPO
> and FUA
>  sdd: sdd1 sdd2
>  sde: sde1 sde2
> sd 6:0:1:0: [sdd] Attached SCSI disk
> sd 6:0:2:0: [sde] Attached SCSI disk
> sd 6:0:0:0: [sdc] Write Protect is off
> sd 6:0:0:0: [sdc] Mode Sense: 73 00 00 08
> sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>  sdc: sdc1
> sd 6:0:0:0: [sdc] Attached SCSI disk
> EXT4-fs (sda1): INFO: recovery required on readonly filesystem
> EXT4-fs (sda1): write access will be enabled during recovery
> EXT4-fs (sda1): recovery complete
> EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
> udevd[1852]: starting version 175
> grsec: time set by /sbin/hwclock[hwclock:1987] uid/euid:0/0 gid/egid:0/0,
> parent /lib/udev/hwclock-set[hwclock-set:1981] uid/euid:0/0 gid/egid:0/0
> md: md0 stopped.
> md: bind
> md: bind
> bio: create slab  at 1
> md/raid0:md0: md_size is 1953535488 sectors.
> md: RAID0 configuration for md0 - 1 zone
> md: zone0=[sdd1/sde1]
>       zone-offset=         0KB, device-offset=         0KB, size=
> 976767744KB
>
> md0: detected capacity change from 0 to 1000210169856
>  md0: unknown partition table
> md: md1 stopped.
> md: bind
> md: bind
> md/raid0:md1: md_size is 1953513984 sectors.
> md: RAID0 configuration for md1 - 1 zone
> md: zone0=[sdd2/sde2]
>       zone-offset=         0KB, device-offset=         0KB, size=
> 976756992KB
>
> md1: detected capacity change from 0 to 1000199159808
>  md1: unknown partition table
> md: md2 stopped.
> md: bind
> md: bind
> md/raid0:md2: md_size is 1953545728 sectors.
> md: RAID0 configuration for md2 - 1 zone
> md: zone0=[sdb1/sdc1]
>       zone-offset=         0KB, device-offset=         0KB, size=
> 976772864KB
>
> md2: detected capacity change from 0 to 1000215412736
>  md2: unknown partition table
> EXT4-fs (sda1): re-mounted. Opts: (null)
> EXT4-fs (sda1): re-mounted. Opts: discard,commit=300,errors=remount-ro
> loop: loaded (max 8 devices)
> EXT4-fs (sda6): recovery complete
> EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
> discard,commit=300
> EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 13
> EXT4-fs (sda5): 1 orphan inode deleted
> EXT4-fs (sda5): recovery complete
> EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
> discard,commit=300
> EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 397428
> EXT4-fs (sda2): 1 orphan inode deleted
> EXT4-fs (sda2): recovery complete
> EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
> discard,commit=300
> EXT4-fs (sda3): recovery complete
> EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
> discard,commit=300
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs (md0): using internal journal
> EXT3-fs (md0): recovery complete
> EXT3-fs (md0): mounted filesystem with ordered data mode
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs (md2): using internal journal
> EXT3-fs (md2): recovery complete
> EXT3-fs (md2): mounted filesystem with ordered data mode
> 8021q: adding VLAN 0 to HW filter on device eth0
> device eth0 entered promiscuous mode
> e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
> br0: port 1(eth0) entering forwarding state
> br0: port 1(eth0) entering forwarding state
>
> ----------------------------------------------------------------------------------------------------
> lspci
> ----------------------------------------------------------------------------------------------------
>
> 00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub
> (rev b1)
> 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8
> Port 2-3 (rev b1)
> 00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4
> Port 3 (rev b1)
> 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8
> Port 4-5 (rev b1)
> 00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4
> Port 5 (rev b1)
> 00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8
> Port 6-7 (rev b1)
> 00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4
> Port 7 (rev b1)
> 00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA
> Engine (rev b1)
> 00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers
> (rev b1)
> 00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers
> (rev b1)
> 00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers
> (rev b1)
> 00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved
> Registers (rev b1)
> 00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved
> Registers (rev b1)
> 00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers
> (rev b1)
> 00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers
> (rev b1)
> 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
> Express Root Port 1 (rev 09)
> 00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset
> UHCI USB Controller #1 (rev 09)
> 00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset
> UHCI USB Controller #2 (rev 09)
> 00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset
> UHCI USB Controller #3 (rev 09)
> 00:1d.3 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset
> UHCI USB Controller #4 (rev 09)
> 00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset
> EHCI USB2 Controller (rev 09)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9)
> 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC
> Interface Controller (rev 09)
> 00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller
> (rev 09)
> 00:1f.2 SATA controller: Intel Corporation 631xESB/632xESB SATA AHCI
> Controller (rev 09)
> 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus
> Controller (rev 09)
> 01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream
> Port (rev 01)
> 01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X
> Bridge (rev 01)
> 02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express
> Downstream Port E1 (rev 01)
> 02:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express
> Downstream Port E2 (rev 01)
> 02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express
> Downstream Port E3 (rev 01)
> 04:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET
> PCI-Express Fusion-MPT SAS (rev 04)
> 05:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
> Ethernet Controller (Copper) (rev 01)
> 05:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit
> Ethernet Controller (Copper) (rev 01)
> 0d:0c.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI
> ES1000 (rev 02)
>



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel