[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Problems in running XenARM on Cortex-A15 Fast Models




2013/9/19 Ian Campbell <ian.campbell@xxxxxxxxxx>
Please don't top post.
Sorry! 

On Thu, 2013-09-19 at 10:56 -0400, XiaoGuang Wang wrote:

> So I don't know why I cannot bring up x-term windows when I start xen
> on fast models. Normally, will it start x-term windows if I do the
> command like:
> model_shell
> FastModels/FastModelsPortfolio_7.0/examples/RTSM_VE/Build_Cortex-A15x1/Linux64-Release-GCC-4.1/cadi_system_Linux64-Release-GCC-4.1.so xen.git/xen/xen.axp

AFAIK the model won't open the xterm until something reads or writes the
related serial port. So if you haven't configured your console correctly
then they may never show up.

What is your hypervisor command line (in the DTS)?

You could also try using CONFIG_EARLY_PRINTK=fastmodel when building
Xen.

Ian.


Hi Ian,

It still doesn't appear. I download xen-4.4 (also try xen-4.3.0) and compile it with this script:

xiaoguang@dophine:~/works/arm/xen/xen-4.3.0$ cat compile-xen.sh
CONFIG_EARLY_PRINTK=fastmodel 
CONFIG_DTB_FILE=/home/xiaoguang/works/arm/xen/vexpress-v2p-ca15-tc1.dtb 
make -C xen XEN_TARGET_ARCH=arm32 CROSS_COMPILE=/usr/bin/arm-linux-gnueabi-

And I run it with this command:
xiaoguang@dophine:~/works/arm/xen$ cat start-xen.sh 
model_shell ~/ARM/FastModelsPortfolio_8.2/examples/FVP_VE/Build_Cortex-A15x1/Linux64-Release-GCC-4.4/cadi_system_Linux64-Release-GCC-4.4.so xen-4.3.0/xen/xen -C motherboard.flashloader0.fname=zImage


Is there anything else I have to do to configure the console? I don't know what this means on wiki:
console=dtuart dtuart=myserial 

Thanks!

Xiaoguang
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.