[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] large packet support in netfront driver and guest network throughput


  • To: Wei Liu <wei.liu2@xxxxxxxxxx>, annie li <annie.li@xxxxxxxxxx>
  • From: Anirban Chakraborty <abchak@xxxxxxxxxxx>
  • Date: Tue, 17 Sep 2013 17:53:43 +0000
  • Accept-language: en-US
  • Cc: "xen-devel@xxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxx>
  • Delivery-date: Tue, 17 Sep 2013 17:54:06 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xen.org>
  • Thread-index: AQHOr+Dtab7v4C01XU6hPj6YULek5ZnDjVUAgABbAoCABIf+AIAAxcGAgABpEwCAAClsgA==
  • Thread-topic: [Xen-devel] large packet support in netfront driver and guest network throughput


On 9/17/13 1:25 AM, "Wei Liu" <wei.liu2@xxxxxxxxxx> wrote:

>On Tue, Sep 17, 2013 at 10:09:21AM +0800, annie li wrote:
>><snip>
>>>>I tried dom0 to dom0 and I got 9.4 Gbps, which is what I expected
>>>>(with GRO turned on in the physical interface). However, when I run
>>>>guest to guest, things fall off. Is large packet not supported in
>>>>netfront? I thought otherwise. I looked at the code and I do not see
>>>>any call to napi_gro_receive(), rather it is using
>>>>netif_receive_skb(). netback seems to be sending GSO packets to the
>>>>netfront, but it is being segmented to 1500 byte (as it appears from
>>>>the tcpdump).
>> >>
>> >OK, I get your problem.
>> >
>> >Indeed netfront doesn't make use of GRO API at the moment.
>> 
>> This is true.
>> But I am wondering why large packet is not segmented into mtu size
>> with upstream kernel? I did see large packets with upsteam kernel on
>> receive guest(test between 2 domus on same host).
>> 
>
>I think Anirban's setup is different. The traffic is from a DomU on
>another host.
>
>I will need to setup testing environment with 10G link to test this.
>
>Anirban, can you share your setup, especially DomU kernel version, are
>you using upstream kernel in DomU?

Sure..
I have two hosts, say h1 and h2 running XenServer 6.1.
h1 running Centos 6.4, 64bit kernel, say guest1 and h2 running identical
guest, guest2.

iperf server is running on guest1 with iperf client connecting from guest2.

I haven't tried with upstream kernel yet. However, what I found out is
that the netback on the receiving host is transmitting GSO segments to the
guest (guest1), but the packets are segmented at the netfront interface.

Annie's setup has both the guests running on the same host, in which case
packets are looped back.

-Anirban



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.