[Xen-devel] [PATCH v2 2/3] xen/arm: Support kick_cpus for OMAP5

[Chen Baozi <baozich@xxxxxxxxx>]

Signed-off-by: Chen Baozi <baozich@xxxxxxxxx>
---
 xen/arch/arm/arm32/mode_switch.S      | 22 +++++++++++++++++++++-
 xen/include/asm-arm/platforms/omap5.h | 14 ++++++++++++++
 2 files changed, 35 insertions(+), 1 deletion(-)

diff --git a/xen/arch/arm/arm32/mode_switch.S b/xen/arch/arm/arm32/mode_switch.S
index 3500eb0..ba2a462 100644
--- a/xen/arch/arm/arm32/mode_switch.S
+++ b/xen/arch/arm/arm32/mode_switch.S
@@ -21,11 +21,13 @@
 #include <asm/page.h>
 #include <asm/platforms/vexpress.h>
 #include <asm/platforms/exynos5.h>
+#include <asm/platforms/omap5.h>
 #include <asm/asm_defns.h>
 #include <asm/gic.h>
 
 /* Wake up secondary cpus
- * This code relies on Machine ID and only works for Vexpress and the Arndale
+ * This code relies on Machine ID and only works for Vexpress, the Arndale
+ * and the OMAP5 uEVM.
  * TODO: Move this code either later (via platform specific desc) or in a 
bootwrapper
  * r5: Machine ID
  * Clobber r0 r2 */
@@ -34,6 +36,10 @@ kick_cpus:
         ldr   r0, =MACH_TYPE_SMDK5250
         teq   r5, r0                          /* Are we running on the 
arndale? */
         beq   kick_cpus_arndale
+        /* for OMAP5432 */
+        ldr   r0, =MACH_TYPE_OMAP5_SEVM
+        teq   r5, r0
+        beq   kick_cpus_omap5
         /* otherwise versatile express */
         /* write start paddr to v2m sysreg FLAGSSET register */
         ldr   r0, =(V2M_SYS_MMIO_BASE)        /* base V2M sysreg MMIO address 
*/
@@ -55,6 +61,20 @@ kick_cpus_arndale:
         str   r2, [r0]
         dsb
         ldr   r2, =EXYNOS5_GIC_BASE_ADDRESS   /* r2 := Exynos5 gic base 
address */
+        b     kick_cpus_sgi
+kick_cpus_omap5:
+       /* write start paddr to AuxCoreBoot1 where ROM code will jump */
+        ldr   r0, =(OMAP_AUX_CORE_BOOT_1)
+        ldr   r2, =start
+        add   r2, r2, r10
+        str   r2, [r0]
+        ldr   r0, =(OMAP_AUX_CORE_BOOT_0)
+        mov   r2, #0x20
+        str   r2, [r0]
+        dsb
+        sev
+        ldr   r2, =OMAP5_GIC_BASE_ADDRESS     /* r2 := OMAP5 gic base address 
*/
+        b     kick_cpus_sgi
 kick_cpus_sgi:
         /* send an interrupt */
         ldr   r0, =GIC_DR_OFFSET              /* GIC distributor offset */
diff --git a/xen/include/asm-arm/platforms/omap5.h 
b/xen/include/asm-arm/platforms/omap5.h
index dd8c6ca..6657af6 100644
--- a/xen/include/asm-arm/platforms/omap5.h
+++ b/xen/include/asm-arm/platforms/omap5.h
@@ -17,6 +17,20 @@
 #define OMAP5_WKUPGEN_BASE                      0x48281000
 #define OMAP5_SRAM_PA                           0x40300000
 
+#define OMAP_AUX_CORE_BOOT_0                    0x48281800
+#define OMAP_AUX_CORE_BOOT_1                    0x48281804
+
+/* Constants below is only used in assembly because the DTS is not yet parsed 
*/
+#ifdef __ASSEMBLY__
+
+/* GIC Base Address */
+#define OMAP5_GIC_BASE_ADDRESS                  0x48210000
+
+/* OMAP5432 uEVM machine ID */
+#define MACH_TYPE_OMAP5_SEVM                    3777
+
+#endif /* __ASSEMBLY__ */
+
 #endif /* __ASM_ARM_PLATFORMS_OMAP5_H */
 
 /*
-- 
1.8.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel