[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.9.0-rc8-20130424-jens+ (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Wed Apr 24 14:01:56 CEST 2013 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb acpi_enforce_resources=lax r8169.use_dac=1 max_loop=50 loop_max_part=10 xen-pciback.hide=(03:06.0)(04:00.*)(05:00.*)(06:00.*)(0a:01.*) debug loglevel=10 [ 0.000000] Freeing 9f-100 pfn range: 97 pages freed [ 0.000000] 1-1 mapping on 9f->100 [ 0.000000] 1-1 mapping on aff90->100000 [ 0.000000] Released 97 pages of unused memory [ 0.000000] Set 327889 page(s) to 1-1 mapping [ 0.000000] Populating 40000-40061 pfn range: 97 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000040060fff] usable [ 0.000000] Xen: [mem 0x0000000040061000-0x00000000aff8ffff] unusable [ 0.000000] Xen: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data [ 0.000000] Xen: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000affe0000-0x00000000afffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000024fffffff] unusable [ 0.000000] e820: remove [mem 0x40000000-0xfffffffffffffffe] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: user-defined physical RAM map: [ 0.000000] user: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] user: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] user: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] user: [mem 0x0000000040061000-0x00000000aff8ffff] unusable [ 0.000000] user: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data [ 0.000000] user: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS [ 0.000000] user: [mem 0x00000000affe0000-0x00000000afffffff] reserved [ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] user: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] user: [mem 0x0000000100000000-0x000000024fffffff] unusable [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x3fe00000-0x3fffffff] [ 0.000000] [mem 0x3fe00000-0x3fffffff] page 4k [ 0.000000] BRK [0x0295f000, 0x0295ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x3c000000-0x3fdfffff] [ 0.000000] [mem 0x3c000000-0x3fdfffff] page 4k [ 0.000000] BRK [0x02960000, 0x02960fff] PGTABLE [ 0.000000] BRK [0x02961000, 0x02961fff] PGTABLE [ 0.000000] BRK [0x02962000, 0x02962fff] PGTABLE [ 0.000000] BRK [0x02963000, 0x02963fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3bffffff] [ 0.000000] [mem 0x00100000-0x3bffffff] page 4k [ 0.000000] RAMDISK: [mem 0x02d6b000-0x03a16fff] [ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 00000000aff9e000 00040 [ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097) [ 0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA turned off [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3fffffff] [ 0.000000] NODE_DATA [mem 0x3fe1a000-0x3fe24fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3fffffff] [ 0.000000] On node 0 totalpages: 262046 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4032 pages used for memmap [ 0.000000] DMA32 zone: 258048 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] e820: [mem 0xb0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f800000 s82112 r8192 d24384 u262144 [ 0.000000] pcpu-alloc: s82112 r8192 d24384 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 4.446697] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257929 [ 4.446699] Policy zone: DMA32 [ 4.446707] Kernel command line: root=/dev/mapper/serveerstertje-root ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb acpi_enforce_resources=lax r8169.use_dac=1 max_loop=50 loop_max_part=10 xen-pciback.hide=(03:06.0)(04:00.*)(05:00.*)(06:00.*)(0a:01.*) debug loglevel=10 [ 4.446857] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 4.446861] __ex_table already sorted, skipping sort [ 4.489112] software IO TLB [mem 0x3a600000-0x3e600000] (64MB) mapped at [ffff88003a600000-ffff88003e5fffff] [ 4.494212] Memory: 921804k/1048576k available (9840k kernel code, 392k absent, 126380k reserved, 5428k data, 1068k init) [ 4.494511] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 4.494618] Preemptible hierarchical RCU implementation. [ 4.494619] RCU dyntick-idle grace-period acceleration is enabled. [ 4.494620] Additional per-CPU info printed with stalls. [ 4.494621] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. [ 4.494666] NR_IRQS:4352 nr_irqs:1272 16 [ 4.494800] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 4.494803] xen: registering gsi 9 triggering 0 polarity 1 [ 4.494838] xen: --> pirq=9 -> irq=9 (gsi=9) [ 4.494862] xen: acpi sci 9 [ 4.494869] xen: --> pirq=1 -> irq=1 (gsi=1) [ 4.494903] xen: --> pirq=2 -> irq=2 (gsi=2) [ 4.494909] xen: --> pirq=3 -> irq=3 (gsi=3) [ 4.494915] xen: --> pirq=4 -> irq=4 (gsi=4) [ 4.494921] xen: --> pirq=5 -> irq=5 (gsi=5) [ 4.494927] xen: --> pirq=6 -> irq=6 (gsi=6) [ 4.494933] xen: --> pirq=7 -> irq=7 (gsi=7) [ 4.494938] xen: --> pirq=8 -> irq=8 (gsi=8) [ 4.494944] xen: --> pirq=10 -> irq=10 (gsi=10) [ 4.494950] xen: --> pirq=11 -> irq=11 (gsi=11) [ 4.494956] xen: --> pirq=12 -> irq=12 (gsi=12) [ 4.494962] xen: --> pirq=13 -> irq=13 (gsi=13) [ 4.494967] xen: --> pirq=14 -> irq=14 (gsi=14) [ 4.494973] xen: --> pirq=15 -> irq=15 (gsi=15) [ 4.495068] Console: colour dummy device 80x25 [ 4.496561] console [tty0] enabled [ 4.496900] console [hvc0] enabled [ 4.496906] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 4.496912] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 4.496915] ... MAX_LOCK_DEPTH: 48 [ 4.496919] ... MAX_LOCKDEP_KEYS: 8191 [ 4.496923] ... CLASSHASH_SIZE: 4096 [ 4.496927] ... MAX_LOCKDEP_ENTRIES: 16384 [ 4.496931] ... MAX_LOCKDEP_CHAINS: 32768 [ 4.496935] ... CHAINHASH_SIZE: 16384 [ 4.496939] memory used by lock dependency info: 5855 kB [ 4.496944] per task-struct memory footprint: 1920 bytes [ 4.496948] kmemleak: Kernel memory leak detector disabled [ 4.497013] Xen: using vcpuop timer interface [ 4.497024] installing Xen timer for CPU 0 [ 4.497084] tsc: Detected 3200.194 MHz processor [ 4.497093] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.07 BogoMIPS (lpj=10667313) [ 4.497103] pid_max: default: 32768 minimum: 301 [ 4.497377] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.497706] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 4.497844] Mount-cache hash table entries: 256 [ 4.498456] Initializing cgroup subsys cpuacct [ 4.498468] Initializing cgroup subsys freezer [ 4.498486] Initializing cgroup subsys blkio [ 4.498556] tseg: 0000000000 [ 4.498596] CPU: Physical Processor ID: 0 [ 4.498601] CPU: Processor Core ID: 0 [ 4.498605] mce: CPU supports 2 MCE banks [ 4.498618] LVT offset 0 assigned for vector 0xf9 [ 4.498622] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 4.498633] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc008000001000000) [ 4.498647] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 4.498647] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 4.498647] tlb_flushall_shift: 4 [ 4.498746] Freeing SMP alternatives: 32k freed [ 4.499445] ACPI: Core revision 20130117 [ 4.503342] ACPI: All ACPI Tables successfully acquired [ 4.505735] Performance Events: Broken PMU hardware detected, using software events only. [ 4.505762] Failed to access perfctr msr (MSR c0010004 is 0) [ 4.540222] NMI watchdog: disabled (cpu0): hardware events not enabled [ 4.547089] installing Xen timer for CPU 1 [ 4.547200] SMP alternatives: lockdep: fixing up alternatives [ 4.547333] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 4.547336] [Firmware Bug]: cpu 1, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc008000001000000) [ 4.553994] installing Xen timer for CPU 2 [ 4.554201] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 4.554205] [Firmware Bug]: cpu 2, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc008000001000000) [ 4.557474] installing Xen timer for CPU 3 [ 4.557762] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 4.557765] [Firmware Bug]: cpu 3, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc008000001000000) [ 4.564358] installing Xen timer for CPU 4 [ 4.564636] [Firmware Bug]: cpu 4, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 4.564640] [Firmware Bug]: cpu 4, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc008000001000000) [ 4.571283] installing Xen timer for CPU 5 [ 4.571551] [Firmware Bug]: cpu 5, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x0 on this cpu [ 4.571554] [Firmware Bug]: cpu 5, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc008000001000000) [ 4.571599] Brought up 6 CPUs [ 4.572564] devtmpfs: initialized [ 4.573504] xor: measuring software checksum speed [ 4.605008] prefetch64-sse: 4528.800 MB/sec [ 4.638868] generic_sse: 4566.000 MB/sec [ 4.638874] xor: using function: generic_sse (4566.000 MB/sec) [ 4.638887] Grant tables using version 2 layout. [ 4.638904] Grant table initialized [ 4.639052] NET: Registered protocol family 16 [ 4.641781] node 0 link 0: io port [1000, ffffff] [ 4.641792] TOM: 00000000b0000000 aka 2816M [ 4.641797] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 4.641806] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 4.641814] node 0 link 0: mmio [f0000000, ffffffff] [ 4.641820] node 0 link 0: mmio [a0000, bffff] [ 4.641826] node 0 link 0: mmio [b0000000, dfffffff] [ 4.641832] TOM2: 0000000250000000 aka 9472M [ 4.641837] bus: [bus 00-07] on node 0 link 0 [ 4.641842] bus: 00 [io 0x0000-0xffff] [ 4.641846] bus: 00 [mem 0xf0000000-0xffffffff] [ 4.641850] bus: 00 [mem 0x000a0000-0x000bffff] [ 4.641854] bus: 00 [mem 0xb0000000-0xdfffffff] [ 4.641858] bus: 00 [mem 0x250000000-0xfcffffffff] [ 4.642162] ACPI: bus type PCI registered [ 4.643316] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 4.643326] PCI: not using MMCONFIG [ 4.643331] PCI: Using configuration type 1 for base access [ 4.643336] PCI: Using configuration type 1 for extended access [ 4.686764] bio: create slab at 0 [ 4.744973] raid6: sse2x1 4000 MB/s [ 4.803005] raid6: sse2x2 5984 MB/s [ 4.861043] raid6: sse2x4 6616 MB/s [ 4.861048] raid6: using algorithm sse2x4 (6616 MB/s) [ 4.861053] raid6: using intx1 recovery algorithm [ 4.861374] ACPI: Added _OSI(Module Device) [ 4.861382] ACPI: Added _OSI(Processor Device) [ 4.861387] ACPI: Added _OSI(3.0 _SCP Extensions) [ 4.861393] ACPI: Added _OSI(Processor Aggregator Device) [ 4.864641] ACPI: EC: Look up EC in DSDT [ 4.868223] ACPI: Executed 3 blocks of module-level executable AML code [ 4.872734] ACPI: Interpreter enabled [ 4.872747] ACPI: (supports S0 S5) [ 4.872752] ACPI: Using IOAPIC for interrupt routing [ 4.872793] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 4.874395] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 4.911462] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.941093] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.941664] PCI host bridge to bus 0000:00 [ 4.941672] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.941678] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 4.941695] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 4.941701] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 4.941708] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 4.941715] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff] [ 4.941722] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 4.941739] pci_bus 0000:00: scanning bus [ 4.941790] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000 [ 4.941802] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 [ 4.942405] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 4.942738] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 4.942833] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 4.942866] pci 0000:00:02.0: PME# disabled [ 4.942921] pci 0000:00:02.0: System wakeup disabled by ACPI [ 4.943198] pci 0000:00:03.0: [1002:5a17] type 01 class 0x060400 [ 4.943302] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 4.943311] pci 0000:00:03.0: PME# disabled [ 4.943365] pci 0000:00:03.0: System wakeup disabled by ACPI [ 4.943702] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 [ 4.943807] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 4.943817] pci 0000:00:05.0: PME# disabled [ 4.943903] pci 0000:00:05.0: System wakeup disabled by ACPI [ 4.944091] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 4.944199] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 4.944209] pci 0000:00:06.0: PME# disabled [ 4.944273] pci 0000:00:06.0: System wakeup disabled by ACPI [ 4.944458] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 4.944552] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 4.944561] pci 0000:00:09.0: PME# disabled [ 4.944623] pci 0000:00:09.0: System wakeup disabled by ACPI [ 4.944823] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 [ 4.944916] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 4.944925] pci 0000:00:0a.0: PME# disabled [ 4.944990] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 4.945336] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400 [ 4.945440] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 4.945450] pci 0000:00:0b.0: PME# disabled [ 4.945529] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 4.945741] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400 [ 4.945843] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 4.945852] pci 0000:00:0d.0: PME# disabled [ 4.945935] pci 0000:00:0d.0: System wakeup disabled by ACPI [ 4.946128] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 4.946149] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x10 [ 4.946170] pci 0000:00:11.0: reg 10: [io 0x7000-0x7007] [ 4.946186] pci 0000:00:11.0: reg 14: [io 0x6000-0x6003] [ 4.946202] pci 0000:00:11.0: reg 18: [io 0x5000-0x5007] [ 4.946219] pci 0000:00:11.0: reg 1c: [io 0x3000-0x3003] [ 4.946235] pci 0000:00:11.0: reg 20: [io 0x2000-0x200f] [ 4.946251] pci 0000:00:11.0: reg 24: [mem 0xf96ff000-0xf96ff3ff] [ 4.946275] pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xe0 [ 4.946290] pci 0000:00:11.0: set SATA to AHCI mode [ 4.946771] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 4.946799] pci 0000:00:12.0: reg 10: [mem 0xf96fb000-0xf96fbfff] [ 4.946971] pci 0000:00:12.0: System wakeup disabled by ACPI [ 4.947191] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 4.947224] pci 0000:00:12.2: reg 10: [mem 0xf96ff400-0xf96ff4ff] [ 4.947383] pci 0000:00:12.2: supports D1 D2 [ 4.947388] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 4.947399] pci 0000:00:12.2: PME# disabled [ 4.947493] pci 0000:00:12.2: System wakeup disabled by ACPI [ 4.947932] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 4.947958] pci 0000:00:13.0: reg 10: [mem 0xf96fc000-0xf96fcfff] [ 4.948134] pci 0000:00:13.0: System wakeup disabled by ACPI [ 4.948340] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 4.948377] pci 0000:00:13.2: reg 10: [mem 0xf96ff800-0xf96ff8ff] [ 4.948496] pci 0000:00:13.2: supports D1 D2 [ 4.948501] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 4.948510] pci 0000:00:13.2: PME# disabled [ 4.948600] pci 0000:00:13.2: System wakeup disabled by ACPI [ 4.948804] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 4.948828] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x50 [ 4.948925] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x10 [ 4.949321] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 4.949331] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x10 [ 4.949357] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 4.949375] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 4.949392] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 4.949410] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 4.949427] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 4.949690] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 4.950080] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 4.950213] pci 0000:00:14.4: System wakeup disabled by ACPI [ 4.950633] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 4.950658] pci 0000:00:14.5: reg 10: [mem 0xf96fd000-0xf96fdfff] [ 4.950858] pci 0000:00:14.5: System wakeup disabled by ACPI [ 4.951191] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 4.951318] pci 0000:00:15.0: supports D1 D2 [ 4.951447] pci 0000:00:15.0: System wakeup disabled by ACPI [ 4.951649] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 4.951674] pci 0000:00:16.0: reg 10: [mem 0xf96fe000-0xf96fefff] [ 4.951855] pci 0000:00:16.0: System wakeup disabled by ACPI [ 4.952206] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 4.952238] pci 0000:00:16.2: reg 10: [mem 0xf96ffc00-0xf96ffcff] [ 4.952374] pci 0000:00:16.2: supports D1 D2 [ 4.952379] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 4.952389] pci 0000:00:16.2: PME# disabled [ 4.952497] pci 0000:00:16.2: System wakeup disabled by ACPI [ 4.952857] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 4.952869] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 [ 4.953227] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 4.953235] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 [ 4.953525] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 4.953534] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 [ 4.954089] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 4.954099] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 [ 4.954445] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 4.954454] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 [ 4.954754] pci_bus 0000:00: fixups for bus [ 4.954762] pci 0000:00:02.0: scanning [bus 0c-0c] behind bridge, pass 0 [ 4.954928] pci_bus 0000:0c: scanning bus [ 4.954953] pci 0000:0c:00.0: [10de:06e4] type 00 class 0x030000 [ 4.954974] pci 0000:0c:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 4.954996] pci 0000:0c:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.955018] pci 0000:0c:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 4.955035] pci 0000:0c:00.0: reg 24: [io 0xe800-0xe87f] [ 4.955050] pci 0000:0c:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 4.961049] pci_bus 0000:0c: fixups for bus [ 4.961058] pci 0000:00:02.0: PCI bridge to [bus 0c] [ 4.961080] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 4.961089] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 4.961101] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.961108] pci_bus 0000:0c: bus scan returning with max=0c [ 4.961118] pci 0000:00:03.0: scanning [bus 0a-0b] behind bridge, pass 0 [ 4.961458] pci_bus 0000:0a: scanning bus [ 4.961498] pci 0000:0a:00.0: [104c:8231] type 01 class 0x060400 [ 4.961657] pci 0000:0a:00.0: supports D1 D2 [ 4.962016] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 4.962032] pci_bus 0000:0a: fixups for bus [ 4.962037] pci 0000:00:03.0: PCI bridge to [bus 0a-0b] [ 4.962052] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 4.962066] pci 0000:0a:00.0: scanning [bus 0b-0b] behind bridge, pass 0 [ 4.962265] pci_bus 0000:0b: scanning bus [ 4.962291] pci 0000:0b:01.0: [1033:0035] type 00 class 0x0c0310 [ 4.962327] pci 0000:0b:01.0: reg 10: [mem 0xf9ffd000-0xf9ffdfff] [ 4.962477] pci 0000:0b:01.0: supports D1 D2 [ 4.962482] pci 0000:0b:01.0: PME# supported from D0 D1 D2 D3hot [ 4.962493] pci 0000:0b:01.0: PME# disabled [ 4.962841] pci 0000:0b:01.1: [1033:0035] type 00 class 0x0c0310 [ 4.962880] pci 0000:0b:01.1: reg 10: [mem 0xf9ffe000-0xf9ffefff] [ 4.963042] pci 0000:0b:01.1: supports D1 D2 [ 4.963047] pci 0000:0b:01.1: PME# supported from D0 D1 D2 D3hot [ 4.963058] pci 0000:0b:01.1: PME# disabled [ 4.963265] pci 0000:0b:01.2: [1033:00e0] type 00 class 0x0c0320 [ 4.963302] pci 0000:0b:01.2: reg 10: [mem 0xf9fffc00-0xf9fffcff] [ 4.963452] pci 0000:0b:01.2: supports D1 D2 [ 4.963457] pci 0000:0b:01.2: PME# supported from D0 D1 D2 D3hot [ 4.963467] pci 0000:0b:01.2: PME# disabled [ 4.963791] pci_bus 0000:0b: fixups for bus [ 4.963797] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 4.963815] pci 0000:0a:00.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 4.963830] pci_bus 0000:0b: bus scan returning with max=0b [ 4.963841] pci 0000:0a:00.0: scanning [bus 0b-0b] behind bridge, pass 1 [ 4.963854] pci_bus 0000:0a: bus scan returning with max=0b [ 4.963863] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 0 [ 4.964206] pci_bus 0000:09: scanning bus [ 4.964241] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000 [ 4.964267] pci 0000:09:00.0: reg 10: [io 0xd800-0xd8ff] [ 4.964306] pci 0000:09:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref] [ 4.964334] pci 0000:09:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref] [ 4.964363] pci 0000:09:00.0: reg 30: [mem 0xf9ee0000-0xf9efffff pref] [ 4.964455] pci 0000:09:00.0: supports D1 D2 [ 4.964460] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.964471] pci 0000:09:00.0: PME# disabled [ 4.971382] pci_bus 0000:09: fixups for bus [ 4.971390] pci 0000:00:05.0: PCI bridge to [bus 09] [ 4.971401] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 4.971409] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 4.971419] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 4.971426] pci_bus 0000:09: bus scan returning with max=09 [ 4.971448] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 0 [ 4.971675] pci_bus 0000:08: scanning bus [ 4.971713] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000 [ 4.971740] pci 0000:08:00.0: reg 10: [io 0xc800-0xc8ff] [ 4.971779] pci 0000:08:00.0: reg 18: [mem 0xcfeff000-0xcfefffff 64bit pref] [ 4.971807] pci 0000:08:00.0: reg 20: [mem 0xcfef8000-0xcfefbfff 64bit pref] [ 4.971827] pci 0000:08:00.0: reg 30: [mem 0xf9de0000-0xf9dfffff pref] [ 4.971917] pci 0000:08:00.0: supports D1 D2 [ 4.971923] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.971934] pci 0000:08:00.0: PME# disabled [ 4.978271] pci_bus 0000:08: fixups for bus [ 4.978279] pci 0000:00:06.0: PCI bridge to [bus 08] [ 4.978289] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 4.978297] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] [ 4.978307] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 4.978314] pci_bus 0000:08: bus scan returning with max=08 [ 4.978322] pci 0000:00:09.0: scanning [bus 07-07] behind bridge, pass 0 [ 4.978532] pci_bus 0000:07: scanning bus [ 4.978575] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330 [ 4.978607] pci 0000:07:00.0: reg 10: [mem 0xf9cfe000-0xf9cfffff 64bit] [ 4.978748] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 4.978759] pci 0000:07:00.0: PME# disabled [ 4.985158] pci_bus 0000:07: fixups for bus [ 4.985165] pci 0000:00:09.0: PCI bridge to [bus 07] [ 4.985178] pci 0000:00:09.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 4.985188] pci_bus 0000:07: bus scan returning with max=07 [ 4.985197] pci 0000:00:0a.0: scanning [bus 06-06] behind bridge, pass 0 [ 4.985430] pci_bus 0000:06: scanning bus [ 4.985461] pci 0000:06:00.0: [14f1:8210] type 00 class 0x040000 [ 4.985500] pci 0000:06:00.0: reg 10: [mem 0xf9a00000-0xf9bfffff 64bit] [ 4.985679] pci 0000:06:00.0: supports D1 D2 [ 4.985685] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot [ 4.985696] pci 0000:06:00.0: PME# disabled [ 4.991946] pci_bus 0000:06: fixups for bus [ 4.991954] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 4.991966] pci 0000:00:0a.0: bridge window [mem 0xf9a00000-0xf9bfffff] [ 4.991977] pci_bus 0000:06: bus scan returning with max=06 [ 4.991991] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 0 [ 4.992236] pci_bus 0000:05: scanning bus [ 4.992262] pci 0000:05:00.0: [1002:6759] type 00 class 0x030000 [ 4.992293] pci 0000:05:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 4.992321] pci 0000:05:00.0: reg 18: [mem 0xf99c0000-0xf99dffff 64bit] [ 4.992339] pci 0000:05:00.0: reg 20: [io 0xb000-0xb0ff] [ 4.992369] pci 0000:05:00.0: reg 30: [mem 0xf99a0000-0xf99bffff pref] [ 4.992439] pci 0000:05:00.0: supports D1 D2 [ 4.992789] pci 0000:05:00.1: [1002:aa90] type 00 class 0x040300 [ 4.992824] pci 0000:05:00.1: reg 10: [mem 0xf99fc000-0xf99fffff 64bit] [ 4.992952] pci 0000:05:00.1: supports D1 D2 [ 4.998904] pci_bus 0000:05: fixups for bus [ 4.998911] pci 0000:00:0b.0: PCI bridge to [bus 05] [ 4.998922] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 4.998929] pci 0000:00:0b.0: bridge window [mem 0xf9900000-0xf99fffff] [ 4.998940] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 4.998946] pci_bus 0000:05: bus scan returning with max=05 [ 4.998955] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 0 [ 4.999166] pci_bus 0000:04: scanning bus [ 4.999213] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 4.999245] pci 0000:04:00.0: reg 10: [mem 0xf98fe000-0xf98fffff 64bit] [ 4.999385] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 4.999396] pci 0000:04:00.0: PME# disabled [ 5.005675] pci_bus 0000:04: fixups for bus [ 5.005683] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 5.005695] pci 0000:00:0d.0: bridge window [mem 0xf9800000-0xf98fffff] [ 5.005705] pci_bus 0000:04: bus scan returning with max=04 [ 5.005714] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0 [ 5.006003] pci_bus 0000:03: scanning bus [ 5.006043] pci 0000:03:06.0: [13f6:0111] type 00 class 0x040100 [ 5.006079] pci 0000:03:06.0: reg 10: [io 0xa800-0xa8ff] [ 5.006222] pci 0000:03:06.0: supports D1 D2 [ 5.006602] pci_bus 0000:03: fixups for bus [ 5.006609] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 5.006620] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 5.006633] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 5.006641] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.006649] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.006657] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 5.006665] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode) [ 5.006673] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 5.006681] pci_bus 0000:03: bus scan returning with max=03 [ 5.006691] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 0 [ 5.006910] pci_bus 0000:02: scanning bus [ 5.006918] pci_bus 0000:02: fixups for bus [ 5.006922] pci 0000:00:15.0: PCI bridge to [bus 02] [ 5.006942] pci_bus 0000:02: bus scan returning with max=02 [ 5.006950] pci 0000:00:02.0: scanning [bus 0c-0c] behind bridge, pass 1 [ 5.006960] pci 0000:00:03.0: scanning [bus 0a-0b] behind bridge, pass 1 [ 5.006971] pci 0000:00:05.0: scanning [bus 09-09] behind bridge, pass 1 [ 5.006981] pci 0000:00:06.0: scanning [bus 08-08] behind bridge, pass 1 [ 5.006991] pci 0000:00:09.0: scanning [bus 07-07] behind bridge, pass 1 [ 5.007002] pci 0000:00:0a.0: scanning [bus 06-06] behind bridge, pass 1 [ 5.007012] pci 0000:00:0b.0: scanning [bus 05-05] behind bridge, pass 1 [ 5.007022] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 1 [ 5.007033] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1 [ 5.007045] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 1 [ 5.007055] pci_bus 0000:00: bus scan returning with max=0c [ 5.007171] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d) [ 5.007353] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted [ 5.012643] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 5.012773] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 5.012898] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 5.013025] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 5.013120] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) [ 5.013198] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) [ 5.013275] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 5.013352] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) [ 5.014158] acpi root: \_SB_.PCI0 notify handler is installed [ 5.014300] Found 1 acpi root devices [ 5.014742] xen/balloon: Initialising balloon driver. [ 5.015046] xen-balloon: Initialising balloon driver. [ 5.016089] vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none [ 5.016109] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none [ 5.016119] vgaarb: loaded [ 5.016123] vgaarb: bridge control possible 0000:05:00.0 [ 5.016127] vgaarb: bridge control possible 0000:0c:00.0 [ 5.016677] SCSI subsystem initialized [ 5.016684] ACPI: bus type ATA registered [ 5.016938] libata version 3.00 loaded. [ 5.017258] ACPI: bus type USB registered [ 5.017426] usbcore: registered new interface driver usbfs [ 5.017513] usbcore: registered new interface driver hub [ 5.017874] usbcore: registered new device driver usb [ 5.018147] Linux video capture interface: v2.00 [ 5.018372] pps_core: LinuxPPS API ver. 1 registered [ 5.018377] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 5.018457] PTP clock support registered [ 5.018965] Advanced Linux Sound Architecture Driver Initialized. [ 5.018972] PCI: Using ACPI for IRQ routing [ 5.029932] PCI: pci_cache_line_size set to 64 bytes [ 5.029956] pci 0000:0c:00.0: BAR 0: reserving [mem 0xfd000000-0xfdffffff flags 0x40200] (d=0, p=0) [ 5.029965] pci 0000:0c:00.0: BAR 1: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0) [ 5.029974] pci 0000:0c:00.0: BAR 3: reserving [mem 0xfa000000-0xfbffffff flags 0x140204] (d=0, p=0) [ 5.029983] pci 0000:0c:00.0: BAR 5: reserving [io 0xe800-0xe87f flags 0x40101] (d=0, p=0) [ 5.029997] pci 0000:0b:01.0: BAR 0: reserving [mem 0xf9ffd000-0xf9ffdfff flags 0x40200] (d=0, p=0) [ 5.030009] pci 0000:0b:01.1: BAR 0: reserving [mem 0xf9ffe000-0xf9ffefff flags 0x40200] (d=0, p=0) [ 5.030020] pci 0000:0b:01.2: BAR 0: reserving [mem 0xf9fffc00-0xf9fffcff flags 0x40200] (d=0, p=0) [ 5.030033] pci 0000:09:00.0: BAR 0: reserving [io 0xd800-0xd8ff flags 0x40101] (d=0, p=0) [ 5.030041] pci 0000:09:00.0: BAR 2: reserving [mem 0xcffff000-0xcfffffff flags 0x14220c] (d=0, p=0) [ 5.030050] pci 0000:09:00.0: BAR 4: reserving [mem 0xcfff8000-0xcfffbfff flags 0x14220c] (d=0, p=0) [ 5.030062] pci 0000:08:00.0: BAR 0: reserving [io 0xc800-0xc8ff flags 0x40101] (d=0, p=0) [ 5.030070] pci 0000:08:00.0: BAR 2: reserving [mem 0xcfeff000-0xcfefffff flags 0x14220c] (d=0, p=0) [ 5.030083] pci 0000:08:00.0: BAR 4: reserving [mem 0xcfef8000-0xcfefbfff flags 0x14220c] (d=0, p=0) [ 5.030096] pci 0000:07:00.0: BAR 0: reserving [mem 0xf9cfe000-0xf9cfffff flags 0x140204] (d=0, p=0) [ 5.030107] pci 0000:06:00.0: BAR 0: reserving [mem 0xf9a00000-0xf9bfffff flags 0x140204] (d=0, p=0) [ 5.030120] pci 0000:05:00.1: BAR 0: reserving [mem 0xf99fc000-0xf99fffff flags 0x140204] (d=0, p=0) [ 5.030131] pci 0000:04:00.0: BAR 0: reserving [mem 0xf98fe000-0xf98fffff flags 0x140204] (d=0, p=0) [ 5.030141] pci 0000:00:11.0: BAR 0: reserving [io 0x7000-0x7007 flags 0x40101] (d=0, p=0) [ 5.030148] pci 0000:00:11.0: BAR 1: reserving [io 0x6000-0x6003 flags 0x40101] (d=0, p=0) [ 5.030155] pci 0000:00:11.0: BAR 2: reserving [io 0x5000-0x5007 flags 0x40101] (d=0, p=0) [ 5.030162] pci 0000:00:11.0: BAR 3: reserving [io 0x3000-0x3003 flags 0x40101] (d=0, p=0) [ 5.030169] pci 0000:00:11.0: BAR 4: reserving [io 0x2000-0x200f flags 0x40101] (d=0, p=0) [ 5.030177] pci 0000:00:11.0: BAR 5: reserving [mem 0xf96ff000-0xf96ff3ff flags 0x40200] (d=0, p=0) [ 5.030189] pci 0000:00:12.0: BAR 0: reserving [mem 0xf96fb000-0xf96fbfff flags 0x40200] (d=0, p=0) [ 5.030198] pci 0000:00:12.2: BAR 0: reserving [mem 0xf96ff400-0xf96ff4ff flags 0x40200] (d=0, p=0) [ 5.030208] pci 0000:00:13.0: BAR 0: reserving [mem 0xf96fc000-0xf96fcfff flags 0x40200] (d=0, p=0) [ 5.030218] pci 0000:00:13.2: BAR 0: reserving [mem 0xf96ff800-0xf96ff8ff flags 0x40200] (d=0, p=0) [ 5.030229] pci 0000:00:14.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 5.030240] pci 0000:00:14.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 5.030247] pci 0000:00:14.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 5.030253] pci 0000:00:14.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 5.030260] pci 0000:00:14.1: BAR 4: reserving [io 0xff00-0xff0f flags 0x40101] (d=0, p=0) [ 5.030274] pci 0000:03:06.0: BAR 0: reserving [io 0xa800-0xa8ff flags 0x40101] (d=0, p=0) [ 5.030283] pci 0000:00:14.5: BAR 0: reserving [mem 0xf96fd000-0xf96fdfff flags 0x40200] (d=0, p=0) [ 5.030294] pci 0000:00:16.0: BAR 0: reserving [mem 0xf96fe000-0xf96fefff flags 0x40200] (d=0, p=0) [ 5.030305] pci 0000:00:16.2: BAR 0: reserving [mem 0xf96ffc00-0xf96ffcff flags 0x40200] (d=0, p=0) [ 5.030349] pci 0000:05:00.0: BAR 0: reserving [mem 0xb0000000-0xbfffffff flags 0x14220c] (d=1, p=1) [ 5.030356] pci 0000:05:00.0: BAR 2: reserving [mem 0xf99c0000-0xf99dffff flags 0x140204] (d=1, p=1) [ 5.030364] pci 0000:05:00.0: BAR 4: reserving [io 0xb000-0xb0ff flags 0x40101] (d=1, p=1) [ 5.030408] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 5.031132] Bluetooth: Core ver 2.16 [ 5.031269] NET: Registered protocol family 31 [ 5.031275] Bluetooth: HCI device and connection manager initialized [ 5.031295] Bluetooth: HCI socket layer initialized [ 5.031301] Bluetooth: L2CAP socket layer initialized [ 5.031316] Bluetooth: SCO socket layer initialized [ 5.031474] Switching to clocksource xen [ 5.031855] FS-Cache: Loaded [ 5.032096] pnp: PnP ACPI init [ 5.032120] ACPI: bus type PNP registered [ 5.032432] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 5.032497] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.032891] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 5.032902] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.039539] pnp 00:02: [dma 4] [ 5.039751] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 5.039780] xen: registering gsi 8 triggering 1 polarity 0 [ 5.039955] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.040133] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 5.040148] xen: registering gsi 13 triggering 1 polarity 0 [ 5.040278] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 5.040481] xen: registering gsi 4 triggering 1 polarity 0 [ 5.040487] Already setup the GSI :4 [ 5.040492] pnp 00:06: [dma 0 disabled] [ 5.040698] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.040976] system 00:07: [io 0x0600-0x06df] has been reserved [ 5.040983] system 00:07: [io 0x0ae0-0x0aef] has been reserved [ 5.040991] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.041133] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 5.041401] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 5.041409] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 5.041417] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.041817] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 5.041825] system 00:0a: [io 0x040b] has been reserved [ 5.041832] system 00:0a: [io 0x04d6] has been reserved [ 5.041838] system 00:0a: [io 0x0c00-0x0c01] has been reserved [ 5.041844] system 00:0a: [io 0x0c14] has been reserved [ 5.041850] system 00:0a: [io 0x0c50-0x0c51] has been reserved [ 5.041856] system 00:0a: [io 0x0c52] has been reserved [ 5.041872] system 00:0a: [io 0x0c6c] has been reserved [ 5.041879] system 00:0a: [io 0x0c6f] has been reserved [ 5.041885] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved [ 5.041892] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved [ 5.041899] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved [ 5.041910] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved [ 5.041917] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved [ 5.041924] system 00:0a: [io 0x0800-0x089f] has been reserved [ 5.041931] system 00:0a: [io 0x0b00-0x0b1f] has been reserved [ 5.041938] system 00:0a: [io 0x0b20-0x0b3f] has been reserved [ 5.041944] system 00:0a: [io 0x0900-0x090f] has been reserved [ 5.041951] system 00:0a: [io 0x0910-0x091f] has been reserved [ 5.041959] system 00:0a: [io 0xfe00-0xfefe] has been reserved [ 5.041966] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved [ 5.041973] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved [ 5.041981] system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved [ 5.041990] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.042502] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 5.042515] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.042858] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 5.042866] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 5.042873] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 5.042880] system 00:0c: [mem 0x00100000-0xafffffff] could not be reserved [ 5.042887] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 5.042895] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.043035] pnp: PnP ACPI: found 13 devices [ 5.043040] ACPI: bus type PNP unregistered [ 5.044680] pciback 0000:06:00.0: seizing device [ 5.044737] pciback 0000:05:00.0: seizing device [ 5.044776] pciback 0000:05:00.1: seizing device [ 5.044815] pciback 0000:04:00.0: seizing device [ 5.044852] pciback 0000:03:06.0: seizing device [ 5.059221] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 5.059344] pci 0000:00:02.0: PCI bridge to [bus 0c] [ 5.059351] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 5.059361] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 5.059369] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 5.059380] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 5.059391] pci 0000:0a:00.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 5.059409] pci 0000:00:03.0: PCI bridge to [bus 0a-0b] [ 5.059418] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 5.059430] pci 0000:00:05.0: PCI bridge to [bus 09] [ 5.059436] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] [ 5.059445] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 5.059453] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 5.059464] pci 0000:00:06.0: PCI bridge to [bus 08] [ 5.059470] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] [ 5.059478] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] [ 5.059486] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 5.059497] pci 0000:00:09.0: PCI bridge to [bus 07] [ 5.059505] pci 0000:00:09.0: bridge window [mem 0xf9c00000-0xf9cfffff] [ 5.059518] pci 0000:00:0a.0: PCI bridge to [bus 06] [ 5.059526] pci 0000:00:0a.0: bridge window [mem 0xf9a00000-0xf9bfffff] [ 5.059539] pci 0000:00:0b.0: PCI bridge to [bus 05] [ 5.059545] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] [ 5.059554] pci 0000:00:0b.0: bridge window [mem 0xf9900000-0xf99fffff] [ 5.059562] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 5.059572] pci 0000:00:0d.0: PCI bridge to [bus 04] [ 5.059580] pci 0000:00:0d.0: bridge window [mem 0xf9800000-0xf98fffff] [ 5.059593] pci 0000:00:14.4: PCI bridge to [bus 03] [ 5.059615] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] [ 5.059634] pci 0000:00:15.0: PCI bridge to [bus 02] [ 5.059703] xen: registering gsi 52 triggering 0 polarity 1 [ 5.059723] xen: --> pirq=52 -> irq=52 (gsi=52) [ 5.059779] xen: registering gsi 52 triggering 0 polarity 1 [ 5.059784] Already setup the GSI :52 [ 5.059830] xen: registering gsi 52 triggering 0 polarity 1 [ 5.059835] Already setup the GSI :52 [ 5.059874] xen: registering gsi 53 triggering 0 polarity 1 [ 5.059886] xen: --> pirq=53 -> irq=53 (gsi=53) [ 5.059932] xen: registering gsi 53 triggering 0 polarity 1 [ 5.059938] Already setup the GSI :53 [ 5.059977] xen: registering gsi 54 triggering 0 polarity 1 [ 5.059988] xen: --> pirq=54 -> irq=54 (gsi=54) [ 5.060035] xen: registering gsi 54 triggering 0 polarity 1 [ 5.060040] Already setup the GSI :54 [ 5.060079] xen: registering gsi 54 triggering 0 polarity 1 [ 5.060085] Already setup the GSI :54 [ 5.060131] xen: registering gsi 16 triggering 0 polarity 1 [ 5.060145] xen: --> pirq=16 -> irq=16 (gsi=16) [ 5.060160] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 5.060166] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 5.060171] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 5.060176] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 5.060181] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff] [ 5.060187] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 5.060192] pci_bus 0000:0c: resource 0 [io 0xe000-0xefff] [ 5.060197] pci_bus 0000:0c: resource 1 [mem 0xfa000000-0xfe9fffff] [ 5.060203] pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 5.060209] pci_bus 0000:0a: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 5.060215] pci_bus 0000:0b: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 5.060220] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 5.060225] pci_bus 0000:09: resource 1 [mem 0xf9e00000-0xf9efffff] [ 5.060231] pci_bus 0000:09: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref] [ 5.060237] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] [ 5.060242] pci_bus 0000:08: resource 1 [mem 0xf9d00000-0xf9dfffff] [ 5.060247] pci_bus 0000:08: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref] [ 5.060254] pci_bus 0000:07: resource 1 [mem 0xf9c00000-0xf9cfffff] [ 5.060259] pci_bus 0000:06: resource 1 [mem 0xf9a00000-0xf9bfffff] [ 5.060265] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 5.060270] pci_bus 0000:05: resource 1 [mem 0xf9900000-0xf99fffff] [ 5.060275] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 5.060282] pci_bus 0000:04: resource 1 [mem 0xf9800000-0xf98fffff] [ 5.060287] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 5.060292] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 5.060297] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 5.060302] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 5.060308] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 5.060313] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff] [ 5.060318] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] [ 5.060369] NET: Registered protocol family 2 [ 5.060757] TCP established hash table entries: 8192 (order: 5, 131072 bytes) [ 5.060903] TCP bind hash table entries: 8192 (order: 7, 524288 bytes) [ 5.061368] TCP: Hash tables configured (established 8192 bind 8192) [ 5.061435] TCP: reno registered [ 5.061453] UDP hash table entries: 512 (order: 4, 81920 bytes) [ 5.061524] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes) [ 5.061714] NET: Registered protocol family 1 [ 5.061760] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50 [ 5.061777] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x710 [ 5.061831] xen: registering gsi 18 triggering 0 polarity 1 [ 5.061849] xen: --> pirq=18 -> irq=18 (gsi=18) [ 5.875253] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x710 [ 5.875298] xen: registering gsi 17 triggering 0 polarity 1 [ 5.875315] xen: --> pirq=17 -> irq=17 (gsi=17) [ 5.875386] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x710 [ 5.875427] xen: registering gsi 18 triggering 0 polarity 1 [ 5.875432] Already setup the GSI :18 [ 5.951924] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x710 [ 5.951968] xen: registering gsi 17 triggering 0 polarity 1 [ 5.951974] Already setup the GSI :17 [ 5.952044] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x710 [ 5.952084] xen: registering gsi 18 triggering 0 polarity 1 [ 5.952089] Already setup the GSI :18 [ 6.028593] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x710 [ 6.028636] xen: registering gsi 18 triggering 0 polarity 1 [ 6.028642] Already setup the GSI :18 [ 6.105258] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x710 [ 6.105301] xen: registering gsi 17 triggering 0 polarity 1 [ 6.105307] Already setup the GSI :17 [ 6.105368] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x80 [ 6.105380] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x80 [ 6.105390] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x80 [ 6.105399] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x80 [ 6.105408] pci 0000:00:18.4: calling quirk_amd_nb_node+0x0/0x80 [ 6.105419] pci 0000:0c:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x10 [ 6.105440] pci 0000:0c:00.0: calling pci_fixup_video+0x0/0xd0 [ 6.105448] pci 0000:0c:00.0: Boot video device [ 6.105456] pci 0000:0a:00.0: calling quirk_xio2000a+0x0/0xa0 [ 6.105461] pci 0000:0a:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled [ 6.105480] pci 0000:0b:01.0: calling quirk_usb_early_handoff+0x0/0x710 [ 6.105506] xen: registering gsi 29 triggering 0 polarity 1 [ 6.105525] xen: --> pirq=29 -> irq=29 (gsi=29) [ 6.105577] pci 0000:0b:01.1: calling quirk_usb_early_handoff+0x0/0x710 [ 6.105602] xen: registering gsi 30 triggering 0 polarity 1 [ 6.105617] xen: --> pirq=30 -> irq=30 (gsi=30) [ 6.105686] pci 0000:0b:01.2: calling quirk_usb_early_handoff+0x0/0x710 [ 6.105711] xen: registering gsi 31 triggering 0 polarity 1 [ 6.105722] xen: --> pirq=31 -> irq=31 (gsi=31) [ 6.105780] pci 0000:07:00.0: calling quirk_usb_early_handoff+0x0/0x710 [ 6.105808] xen: registering gsi 48 triggering 0 polarity 1 [ 6.105820] xen: --> pirq=48 -> irq=48 (gsi=48) [ 6.105871] pciback 0000:05:00.0: calling pci_fixup_video+0x0/0xd0 [ 6.105885] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x710 [ 6.105910] xen: registering gsi 40 triggering 0 polarity 1 [ 6.105921] xen: --> pirq=40 -> irq=40 (gsi=40) [ 6.106004] PCI: CLS 64 bytes, default 64 [ 6.106138] Trying to unpack rootfs image as initramfs... [ 6.126672] Freeing initrd memory: 12976k freed [ 6.137547] DMA-API: preallocated 65536 debug entries [ 6.137559] DMA-API: debugging enabled by kernel config [ 6.141924] Scanning for low memory corruption every 60 seconds [ 6.143998] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 6.144758] audit: initializing netlink socket (disabled) [ 6.144795] type=2000 audit(1366806419.123:1): initialized [ 6.146023] bounce pool size: 64 pages [ 6.146035] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.155387] VFS: Disk quotas dquot_6.5.2 [ 6.155579] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.158906] NTFS driver 2.1.30 [Flags: R/W]. [ 6.159846] fuse init (API version 7.21) [ 6.161889] Btrfs loaded [ 6.163136] GFS2 installed [ 6.163541] ceph: loaded (mds proto 32) [ 6.163554] msgmni has been set to 1825 [ 6.166178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 6.166219] io scheduler noop registered [ 6.166223] io scheduler deadline registered [ 6.166492] io scheduler cfq registered (default) [ 6.167198] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 6.167203] crc32: self tests passed, processed 225944 bytes in 98200 nsec [ 6.167311] crc32c: CRC_LE_BITS = 64 [ 6.167315] crc32c: self tests passed, processed 225944 bytes in 50341 nsec [ 6.171932] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.172323] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.172330] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 6.172450] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 6.172458] cpcihp_generic: not configured, disabling. [ 6.172846] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.172855] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 6.196553] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 6.197045] usbcore: registered new interface driver udlfb [ 6.197185] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 6.197192] vesafb: scrolling: redraw [ 6.197197] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 6.198973] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010300000, using 10240k, total 14336k [ 6.221195] Console: switching to colour frame buffer device 160x64 [ 6.241521] fb0: VESA VGA frame buffer device [ 6.242217] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 6.242471] ACPI: Power Button [PWRB] [ 6.242759] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 6.242948] ACPI: Power Button [PWRF] [ 6.250702] Warning: Processor Platform Limit not supported. [ 6.252134] Event-channel device installed. [ 6.253198] xen: registering gsi 22 triggering 0 polarity 1 [ 6.253349] xen: --> pirq=22 -> irq=22 (gsi=22) [ 6.278681] xen: registering gsi 40 triggering 0 polarity 1 [ 6.278823] Already setup the GSI :40 [ 6.485192] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 6.485434] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf98fe004) [ 6.485663] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 6.485877] pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100102) [ 6.486202] xen: registering gsi 33 triggering 0 polarity 1 [ 6.486350] xen: --> pirq=33 -> irq=33 (gsi=33) [ 6.511951] pciback 0000:05:00.0: enabling device (0000 -> 0003) [ 6.512117] xen: registering gsi 32 triggering 0 polarity 1 [ 6.512264] xen: --> pirq=32 -> irq=32 (gsi=32) [ 6.538555] xen: registering gsi 47 triggering 0 polarity 1 [ 6.538706] xen: --> pirq=47 -> irq=47 (gsi=47) [ 6.745185] pciback 0000:06:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 6.745432] pciback 0000:06:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf9a00004) [ 6.745662] pciback 0000:06:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 6.745878] pciback 0000:06:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100106) [ 6.746365] xen-pciback: backend is vpci [ 6.749661] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.753009] hpet_acpi_add: no address or irqs in _CRS [ 6.753600] Linux agpgart interface v0.103 [ 6.755689] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 6.755917] Hangcheck: Using getrawmonotonic(). [ 6.756198] [drm] Initialized drm 1.1.0 20060810 [ 6.756523] [drm] radeon kernel modesetting enabled. [ 6.771805] brd: module loaded [ 6.807596] loop: module loaded [ 6.816659] ahci 0000:00:11.0: version 3.0 [ 6.823581] xen: registering gsi 19 triggering 0 polarity 1 [ 6.830332] xen: --> pirq=19 -> irq=19 (gsi=19) [ 6.837394] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 6.844301] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 6.853584] scsi0 : ahci [ 6.861087] scsi1 : ahci [ 6.867983] scsi2 : ahci [ 6.874703] scsi3 : ahci [ 6.881375] ata1: SATA max UDMA/133 abar m1024@0xf96ff000 port 0xf96ff100 irq 121 [ 6.887814] ata2: SATA max UDMA/133 abar m1024@0xf96ff000 port 0xf96ff180 irq 121 [ 6.894131] ata3: SATA max UDMA/133 abar m1024@0xf96ff000 port 0xf96ff200 irq 121 [ 6.900465] ata4: SATA max UDMA/133 abar m1024@0xf96ff000 port 0xf96ff280 irq 121 [ 6.907523] tun: Universal TUN/TAP device driver, 1.6 [ 6.913577] tun: (C) 1999-2004 Max Krasnyansky [ 6.920046] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 6.926153] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 6.932625] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k [ 6.938777] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 6.945213] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.1.2-k [ 6.951417] igb: Copyright (c) 2007-2013 Intel Corporation. [ 6.957834] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k [ 6.964000] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 6.970474] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.976644] xen: registering gsi 46 triggering 0 polarity 1 [ 6.982762] xen: --> pirq=46 -> irq=46 (gsi=46) [ 6.988718] r8169 0000:09:00.0: enabling Mem-Wr-Inval [ 6.995416] r8169 0000:09:00.0 eth0: RTL8168d/8111d at 0xffffc900001be000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 122 [ 7.001630] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.007827] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.014007] xen: registering gsi 51 triggering 0 polarity 1 [ 7.020193] xen: --> pirq=51 -> irq=51 (gsi=51) [ 7.026367] r8169 0000:08:00.0: enabling Mem-Wr-Inval [ 7.033212] r8169 0000:08:00.0 eth1: RTL8168d/8111d at 0xffffc900001e2000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 123 [ 7.039467] r8169 0000:08:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.046266] Initialising Xen virtual ethernet driver. [ 7.054006] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.060390] ehci-pci: EHCI PCI platform driver [ 7.066720] xen: registering gsi 17 triggering 0 polarity 1 [ 7.073003] Already setup the GSI :17 [ 7.079291] ehci-pci 0000:00:12.2: enabling bus mastering [ 7.085627] ehci-pci 0000:00:12.2: EHCI Host Controller [ 7.092304] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 7.098615] QUIRK: Enable AMD PLL fix [ 7.104969] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.111356] ehci-pci 0000:00:12.2: debug port 1 [ 7.117887] ehci-pci 0000:00:12.2: enabling Mem-Wr-Inval [ 7.124392] ehci-pci 0000:00:12.2: irq 17, io mem 0xf96ff400 [ 7.138567] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 7.145065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.151349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.157604] usb usb1: Product: EHCI Host Controller [ 7.163962] usb usb1: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ehci_hcd [ 7.170199] usb usb1: SerialNumber: 0000:00:12.2 [ 7.177262] hub 1-0:1.0: USB hub found [ 7.183555] hub 1-0:1.0: 5 ports detected [ 7.190075] xen: registering gsi 17 triggering 0 polarity 1 [ 7.196254] Already setup the GSI :17 [ 7.202561] ehci-pci 0000:00:13.2: enabling bus mastering [ 7.208850] ehci-pci 0000:00:13.2: EHCI Host Controller [ 7.215427] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 7.221772] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.225161] ata4: SATA link down (SStatus 0 SControl 300) [ 7.234295] ehci-pci 0000:00:13.2: debug port 1 [ 7.234333] ata2: SATA link down (SStatus 0 SControl 300) [ 7.247021] ehci-pci 0000:00:13.2: enabling Mem-Wr-Inval [ 7.253436] ehci-pci 0000:00:13.2: irq 17, io mem 0xf96ff800 [ 7.268559] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 7.274942] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.281472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.288051] usb usb2: Product: EHCI Host Controller [ 7.294680] usb usb2: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ehci_hcd [ 7.301393] usb usb2: SerialNumber: 0000:00:13.2 [ 7.308559] hub 2-0:1.0: USB hub found [ 7.315071] hub 2-0:1.0: 5 ports detected [ 7.321887] xen: registering gsi 17 triggering 0 polarity 1 [ 7.328351] Already setup the GSI :17 [ 7.334853] ehci-pci 0000:00:16.2: enabling bus mastering [ 7.341452] ehci-pci 0000:00:16.2: EHCI Host Controller [ 7.348186] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 7.354571] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 7.361089] ehci-pci 0000:00:16.2: debug port 1 [ 7.367548] ehci-pci 0000:00:16.2: enabling Mem-Wr-Inval [ 7.373869] ehci-pci 0000:00:16.2: irq 17, io mem 0xf96ffc00 [ 7.388557] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 7.391834] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.391931] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.407189] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.413285] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.413327] ata3.00: ATA-8: ST2000DL003-9VT166, CC45, max UDMA/133 [ 7.413328] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.431551] usb usb3: Product: EHCI Host Controller [ 7.431579] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 7.431581] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 7.449676] usb usb3: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ehci_hcd [ 7.455719] usb usb3: SerialNumber: 0000:00:16.2 [ 7.455794] ata3.00: configured for UDMA/133 [ 7.467882] ata1.00: configured for UDMA/133 [ 7.468197] hub 3-0:1.0: USB hub found [ 7.468204] hub 3-0:1.0: 4 ports detected [ 7.468570] xen: registering gsi 31 triggering 0 polarity 1 [ 7.468572] Already setup the GSI :31 [ 7.468590] ehci-pci 0000:0b:01.2: enabling bus mastering [ 7.468599] ehci-pci 0000:0b:01.2: EHCI Host Controller [ 7.468885] ehci-pci 0000:0b:01.2: new USB bus registered, assigned bus number 4 [ 7.469036] ehci-pci 0000:0b:01.2: irq 31, io mem 0xf9fffc00 [ 7.519783] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 7.526714] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 7.527662] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.528626] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC45 PQ: 0 ANSI: 5 [ 7.529225] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 7.529227] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 7.529434] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.529485] sd 2:0:0:0: [sdb] Write Protect is off [ 7.529487] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.529570] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.557706] sdb: sdb1 [ 7.559421] sd 2:0:0:0: [sdb] Attached SCSI disk [ 7.591080] sd 0:0:0:0: [sda] Write Protect is off [ 7.596971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.602838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.611911] sda: sda1 sda2 sda3 [ 7.618733] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.731876] ehci-pci 0000:0b:01.2: USB 2.0 started, EHCI 1.00 [ 7.739409] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.746973] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.754539] usb usb4: Product: EHCI Host Controller [ 7.761775] usb usb4: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ehci_hcd [ 7.767759] usb usb4: SerialNumber: 0000:0b:01.2 [ 7.774288] hub 4-0:1.0: USB hub found [ 7.780259] hub 4-0:1.0: 5 ports detected [ 7.786667] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.792724] xen: registering gsi 18 triggering 0 polarity 1 [ 7.798718] Already setup the GSI :18 [ 7.804763] ohci_hcd 0000:00:12.0: enabling bus mastering [ 7.810810] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 7.817153] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5 [ 7.823415] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf96fb000 [ 7.886235] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.893774] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.901171] usb usb5: Product: OHCI Host Controller [ 7.907156] usb usb5: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ohci_hcd [ 7.913219] usb usb5: SerialNumber: 0000:00:12.0 [ 7.919803] hub 5-0:1.0: USB hub found [ 7.925955] hub 5-0:1.0: 5 ports detected [ 7.932302] xen: registering gsi 18 triggering 0 polarity 1 [ 7.938339] Already setup the GSI :18 [ 7.944453] ohci_hcd 0000:00:13.0: enabling bus mastering [ 7.950489] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 7.956838] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6 [ 7.962996] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf96fc000 [ 8.026035] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.033549] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.040926] usb usb6: Product: OHCI Host Controller [ 8.046758] usb usb6: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ohci_hcd [ 8.052707] usb usb6: SerialNumber: 0000:00:13.0 [ 8.059301] hub 6-0:1.0: USB hub found [ 8.065405] hub 6-0:1.0: 5 ports detected [ 8.071669] xen: registering gsi 18 triggering 0 polarity 1 [ 8.077693] Already setup the GSI :18 [ 8.083771] ohci_hcd 0000:00:14.5: enabling bus mastering [ 8.089817] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 8.096261] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 8.102529] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf96fd000 [ 8.166002] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.173658] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.181094] usb usb7: Product: OHCI Host Controller [ 8.187063] usb usb7: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ohci_hcd [ 8.193301] usb usb7: SerialNumber: 0000:00:14.5 [ 8.199826] hub 7-0:1.0: USB hub found [ 8.205791] hub 7-0:1.0: 2 ports detected [ 8.211968] xen: registering gsi 18 triggering 0 polarity 1 [ 8.217858] Already setup the GSI :18 [ 8.223863] ohci_hcd 0000:00:16.0: enabling bus mastering [ 8.229810] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 8.236033] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8 [ 8.242044] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf96fe000 [ 8.278436] usb 5-5: new full-speed USB device number 2 using ohci_hcd [ 8.302687] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.310198] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.317629] usb usb8: Product: OHCI Host Controller [ 8.324135] usb usb8: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ohci_hcd [ 8.330042] usb usb8: SerialNumber: 0000:00:16.0 [ 8.336488] hub 8-0:1.0: USB hub found [ 8.342375] hub 8-0:1.0: 4 ports detected [ 8.348375] xen: registering gsi 29 triggering 0 polarity 1 [ 8.354113] Already setup the GSI :29 [ 8.359826] ohci_hcd 0000:0b:01.0: enabling bus mastering [ 8.365679] ohci_hcd 0000:0b:01.0: OHCI Host Controller [ 8.371877] ohci_hcd 0000:0b:01.0: new USB bus registered, assigned bus number 9 [ 8.377810] ohci_hcd 0000:0b:01.0: irq 29, io mem 0xf9ffd000 [ 8.465261] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.471039] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.476843] usb usb9: Product: OHCI Host Controller [ 8.482695] usb usb9: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ohci_hcd [ 8.488557] usb usb9: SerialNumber: 0000:0b:01.0 [ 8.495015] hub 9-0:1.0: USB hub found [ 8.500856] hub 9-0:1.0: 3 ports detected [ 8.507062] xen: registering gsi 30 triggering 0 polarity 1 [ 8.512804] Already setup the GSI :30 [ 8.518543] ohci_hcd 0000:0b:01.1: enabling bus mastering [ 8.524323] ohci_hcd 0000:0b:01.1: OHCI Host Controller [ 8.530394] ohci_hcd 0000:0b:01.1: new USB bus registered, assigned bus number 10 [ 8.536319] ohci_hcd 0000:0b:01.1: irq 30, io mem 0xf9ffe000 [ 8.625231] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.631179] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.637140] usb usb10: Product: OHCI Host Controller [ 8.643119] usb usb10: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ ohci_hcd [ 8.649162] usb usb10: SerialNumber: 0000:0b:01.1 [ 8.655543] hub 10-0:1.0: USB hub found [ 8.661515] hub 10-0:1.0: 2 ports detected [ 8.667702] uhci_hcd: USB Universal Host Controller Interface driver [ 8.674091] xen: registering gsi 48 triggering 0 polarity 1 [ 8.679873] Already setup the GSI :48 [ 8.685690] xhci_hcd 0000:07:00.0: enabling bus mastering [ 8.691454] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 8.697620] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 11 [ 8.703732] xhci_hcd 0000:07:00.0: enabling Mem-Wr-Inval [ 8.710202] usb usb11: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.716036] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.721991] usb usb11: Product: xHCI Host Controller [ 8.727959] usb usb11: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ xhci_hcd [ 8.727977] usb 5-5: New USB device found, idVendor=0a12, idProduct=0001 [ 8.727979] usb 5-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 8.727980] usb 5-5: Product: EDRClassone [ 8.752414] usb usb11: SerialNumber: 0000:07:00.0 [ 8.758809] xHCI xhci_add_endpoint called for root hub [ 8.764953] xHCI xhci_check_bandwidth called for root hub [ 8.771087] hub 11-0:1.0: USB hub found [ 8.777000] hub 11-0:1.0: 2 ports detected [ 8.783005] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 8.789042] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 12 [ 8.794955] usb usb12: New USB device found, idVendor=1d6b, idProduct=0003 [ 8.800979] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.806941] usb usb12: Product: xHCI Host Controller [ 8.812974] usb usb12: Manufacturer: Linux 3.9.0-rc8-20130424-jens+ xhci_hcd [ 8.818964] usb usb12: SerialNumber: 0000:07:00.0 [ 8.825329] xHCI xhci_add_endpoint called for root hub [ 8.831253] xHCI xhci_check_bandwidth called for root hub [ 8.837428] hub 12-0:1.0: USB hub found [ 8.843325] hub 12-0:1.0: 2 ports detected [ 8.849703] usbcore: registered new interface driver usblp [ 8.855489] Initializing USB Mass Storage driver... [ 8.861656] usbcore: registered new interface driver usb-storage [ 8.867515] USB Mass Storage support registered. [ 8.873878] usbcore: registered new interface driver usbserial [ 8.879921] usbcore: registered new interface driver cp210x [ 8.886005] usbserial: USB Serial support registered for cp210x [ 8.892062] usbcore: registered new interface driver cypress_m8 [ 8.898065] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 8.904112] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 8.910297] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 8.916245] usbcore: registered new interface driver mos7720 [ 8.922136] usbserial: USB Serial support registered for Moschip 2 port adapter [ 8.928094] usbcore: registered new interface driver mos7840 [ 8.934035] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 8.940630] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 8.947440] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.953692] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.960511] mousedev: PS/2 mouse device common for all mice [ 8.967947] rtc_cmos 00:03: RTC can wake from S4 [ 8.974545] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 8.980683] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram [ 8.987667] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130117/utaddress-251) [ 8.994052] ACPI: This conflict may cause random problems and system instability [ 9.000351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.006796] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 9.014719] lirc_dev: IR Remote Control driver registered, major 248 [ 9.021177] IR NEC protocol handler initialized [ 9.027616] IR RC5(x) protocol handler initialized [ 9.034019] IR RC6 protocol handler initialized [ 9.040376] IR JVC protocol handler initialized [ 9.046662] IR Sony protocol handler initialized [ 9.052905] IR RC5 (streamzap) protocol handler initialized [ 9.059214] IR SANYO protocol handler initialized [ 9.065517] IR MCE Keyboard/mouse protocol handler initialized [ 9.071839] IR LIRC bridge handler initialized [ 9.078093] cx25821: driver version 0.0.106 loaded [ 9.085213] usbcore: registered new interface driver pvrusb2 [ 9.091504] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner [ 9.097863] pvrusb2: Debug mask is 31 (0x1f) [ 9.104416] f71805f: Unsupported Fintek device, skipping [ 9.110850] f71882fg: Found f71889ed chip at 0x600, revision 16 [ 9.117549] ACPI Warning: 0x0000000000000600-0x0000000000000607 SystemIO conflicts with Region \HMOR 1 (20130117/utaddress-251) [ 9.124194] ACPI: This conflict may cause random problems and system instability [ 9.130847] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.137885] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode [ 9.144766] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode [ 9.151553] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode [ 9.226748] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 9.236240] sp5100_tco: PCI Revision ID: 0x41 [ 9.244739] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 9.253252] sp5100_tco: Last reboot was not triggered by watchdog. [ 9.261841] sp5100_tco: initialized (0xffffc900102e4b00). heartbeat=60 sec (nowayout=0) [ 9.268549] xen_wdt: Xen WatchDog Timer Driver v0.01 [ 9.275833] xen_wdt: cannot register miscdev on minor=130 (-16) [ 9.282554] wdt: probe of wdt failed with error -16 [ 9.290036] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx [ 9.297154] Bluetooth: Virtual HCI driver ver 1.3 [ 9.304421] Bluetooth: HCI UART driver ver 2.2 [ 9.311304] Bluetooth: HCI H4 protocol initialized [ 9.318123] Bluetooth: HCI BCSP protocol initialized [ 9.324911] Bluetooth: HCILL protocol initialized [ 9.331624] Bluetooth: HCIATH3K protocol initialized [ 9.338294] Bluetooth: HCI Three-wire UART (H5) protocol initialized [ 9.345227] usbcore: registered new interface driver bcm203x [ 9.352186] usbcore: registered new interface driver bpa10x [ 9.359008] usbcore: registered new interface driver bfusb [ 9.366387] usbcore: registered new interface driver btusb [ 9.373269] usbcore: registered new interface driver ath3k [ 9.380468] hidraw: raw HID events driver (C) Jiri Kosina [ 9.388798] usbcore: registered new interface driver usbhid [ 9.395274] usbhid: USB HID core driver [ 9.407308] usbcore: registered new interface driver snd-usb-audio [ 9.413903] usbcore: registered new interface driver snd-ua101 [ 9.420359] usbcore: registered new interface driver snd-usb-usx2y [ 9.426716] usbcore: registered new interface driver snd-usb-caiaq [ 9.433037] usbcore: registered new interface driver snd-usb-6fire [ 9.439164] Netfilter messages via NETLINK v0.30. [ 9.445283] nfnl_acct: registering with nfnetlink. [ 9.451421] nf_conntrack version 0.5.0 (7303 buckets, 29212 max) [ 9.458085] ctnetlink v0.93: registering with nfnetlink. [ 9.464799] xt_time: kernel timezone is -0000 [ 9.470693] ip_set: protocol 6 [ 9.476443] IPVS: Registered protocols () [ 9.482073] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 9.487794] IPVS: Creating netns size=1904 id=0 [ 9.493441] IPVS: ipvs loaded. [ 9.499119] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.504836] TCP: cubic registered [ 9.510526] NET: Registered protocol family 17 [ 9.516230] Bridge firewalling registered [ 9.521913] Ebtables v2.0 registered [ 9.527638] Bluetooth: RFCOMM TTY layer initialized [ 9.533249] Bluetooth: RFCOMM socket layer initialized [ 9.538805] Bluetooth: RFCOMM ver 1.11 [ 9.544323] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.549832] Bluetooth: BNEP filters: protocol multicast [ 9.555257] Bluetooth: BNEP socket layer initialized [ 9.560623] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 9.565978] Bluetooth: HIDP socket layer initialized [ 9.571292] Key type ceph registered [ 9.576430] libceph: loaded (mon/osd proto 15/24) [ 9.583294] registered taskstats version 1 [ 9.589445] console [netcon0] enabled [ 9.594238] netconsole: network logging started [ 9.599233] ALSA device list: [ 9.604150] No soundcards found. [ 9.609856] Freeing unused kernel memory: 1068k freed [ 9.614967] Write protecting the kernel read-only data: 14336k [ 9.626156] Freeing unused kernel memory: 388k freed [ 9.631307] Freeing unused kernel memory: 196k freed [ 9.687923] udev[1529]: starting version 164 [ 10.248351] bio: create slab at 1 [ 10.554802] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 12.163143] udev[1828]: starting version 164 [ 13.003547] ata1.00: configured for UDMA/133 [ 13.008640] ata1: EH complete [ 13.518169] ata1.00: configured for UDMA/133 [ 13.518175] ata1: EH complete [ 14.144170] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 14.476987] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro [ 23.541460] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097148k [ 32.389859] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 34.519854] r8169 0000:08:00.0 eth1: link down [ 34.526632] r8169 0000:08:00.0 eth1: link down [ 34.679825] r8169 0000:09:00.0 eth0: link down [ 34.679851] r8169 0000:09:00.0 eth0: link down [ 36.232696] r8169 0000:08:00.0 eth1: link up [ 36.340383] r8169 0000:09:00.0 eth0: link up [ 64.267632] sshd (6503): /proc/6503/oom_adj is deprecated, please use /proc/6503/oom_score_adj instead. [ 70.923243] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 75.676554] EXT4-fs (dm-36): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 80.021526] EXT4-fs (dm-37): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 84.356328] EXT4-fs (dm-38): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 88.747013] EXT4-fs (dm-39): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 93.032493] EXT4-fs (dm-40): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 97.560012] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro [ 104.437793] device vif1.0 entered promiscuous mode [ 105.564230] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 105.578514] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 105.593252] xen_bridge: port 1(vif1.0) entered forwarding state [ 105.604066] xen_bridge: port 1(vif1.0) entered forwarding state [ 110.529076] device vif2.0 entered promiscuous mode [ 111.233330] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 111.248404] xen_bridge: port 2(vif2.0) entered forwarding state [ 111.259469] xen_bridge: port 2(vif2.0) entered forwarding state [ 116.513273] device vif3.0 entered promiscuous mode [ 117.182182] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 117.196540] xen_bridge: port 3(vif3.0) entered forwarding state [ 117.207495] xen_bridge: port 3(vif3.0) entered forwarding state [ 120.621911] xen_bridge: port 1(vif1.0) entered forwarding state [ 122.918630] device vif4.0 entered promiscuous mode [ 123.455794] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 123.470132] xen_bridge: port 4(vif4.0) entered forwarding state [ 123.480467] xen_bridge: port 4(vif4.0) entered forwarding state [ 126.276722] xen_bridge: port 2(vif2.0) entered forwarding state [ 128.839898] device vif5.0 entered promiscuous mode [ 129.434227] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 129.448205] xen_bridge: port 5(vif5.0) entered forwarding state [ 129.457941] xen_bridge: port 5(vif5.0) entered forwarding state [ 132.253049] xen_bridge: port 3(vif3.0) entered forwarding state [ 134.833554] device vif6.0 entered promiscuous mode [ 135.489731] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 135.503401] xen_bridge: port 6(vif6.0) entered forwarding state [ 135.513196] xen_bridge: port 6(vif6.0) entered forwarding state [ 138.496102] xen_bridge: port 4(vif4.0) entered forwarding state [ 140.834082] device vif7.0 entered promiscuous mode [ 141.442976] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 141.455975] xen_bridge: port 7(vif7.0) entered forwarding state [ 141.465163] xen_bridge: port 7(vif7.0) entered forwarding state [ 144.472465] xen_bridge: port 5(vif5.0) entered forwarding state [ 146.856604] device vif8.0 entered promiscuous mode [ 147.371832] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 147.384516] xen_bridge: port 8(vif8.0) entered forwarding state [ 147.393046] xen_bridge: port 8(vif8.0) entered forwarding state [ 150.555524] xen_bridge: port 6(vif6.0) entered forwarding state [ 152.750788] device vif9.0 entered promiscuous mode [ 153.491054] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 153.503091] xen_bridge: port 9(vif9.0) entered forwarding state [ 153.511224] xen_bridge: port 9(vif9.0) entered forwarding state [ 156.478459] xen_bridge: port 7(vif7.0) entered forwarding state [ 159.117929] device vif10.0 entered promiscuous mode [ 159.713338] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 159.724910] xen_bridge: port 10(vif10.0) entered forwarding state [ 159.732529] xen_bridge: port 10(vif10.0) entered forwarding state [ 162.454880] xen_bridge: port 8(vif8.0) entered forwarding state [ 165.418933] device vif11.0 entered promiscuous mode [ 165.552546] xen-pciback: vpci: 0000:03:06.0: assign to virtual slot 0 [ 166.179413] xen-blkback:ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) persistent grants [ 166.191236] xen_bridge: port 11(vif11.0) entered forwarding state [ 166.199223] xen_bridge: port 11(vif11.0) entered forwarding state [ 167.264463] pciback 0000:03:06.0: enabling device (0000 -> 0001) [ 167.273370] xen: registering gsi 22 triggering 0 polarity 1 [ 167.281982] Already setup the GSI :22 [ 167.291094] pciback 0000:03:06.0: enabling bus mastering [ 168.537870] xen_bridge: port 9(vif9.0) entered forwarding state [ 172.894987] device vif12.0 entered promiscuous mode [ 173.586636] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 173.598396] xen_bridge: port 12(vif12.0) entered forwarding state [ 173.606326] xen_bridge: port 12(vif12.0) entered forwarding state [ 174.780900] xen_bridge: port 10(vif10.0) entered forwarding state [ 178.930508] device vif13.0 entered promiscuous mode [ 179.596775] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 179.609098] vpn_bridge: port 1(vif13.0) entered forwarding state [ 179.617109] vpn_bridge: port 1(vif13.0) entered forwarding state [ 181.237526] xen_bridge: port 11(vif11.0) entered forwarding state [ 188.654577] xen_bridge: port 12(vif12.0) entered forwarding state [ 193.461705] device vif15.0 entered promiscuous mode [ 193.729658] device vif15.0-emu entered promiscuous mode [ 193.743944] xen_bridge: port 14(vif15.0-emu) entered forwarding state [ 193.751287] xen_bridge: port 14(vif15.0-emu) entered forwarding state [ 193.977336] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 193.984718] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf98fe004) [ 193.991934] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 194.224011] pciback 0000:06:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 194.231199] pciback 0000:06:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf9a00004) [ 194.238260] pciback 0000:06:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 194.270980] xen-pciback: vpci: 0000:04:00.0: assign to virtual slot 0 [ 194.278546] xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1 [ 194.630833] vpn_bridge: port 1(vif13.0) entered forwarding state [ 208.771212] xen_bridge: port 14(vif15.0-emu) entered forwarding state [ 225.043964] xen-blkback:ring-ref 8, event-channel 22, protocol 1 (x86_64-abi) persistent grants [ 225.056657] xen-blkback:ring-ref 9, event-channel 23, protocol 1 (x86_64-abi) persistent grants [ 226.951574] xen_bridge: port 13(vif15.0) entered forwarding state [ 226.957968] xen_bridge: port 13(vif15.0) entered forwarding state [ 242.014587] xen_bridge: port 13(vif15.0) entered forwarding state [ 644.997161] UDP: bad checksum. From 173.206.34.58:17874 to 88.159.66.224:49160 ulen 106 [ 670.863418] device vif16.0 entered promiscuous mode [ 671.020553] device vif16.0-emu entered promiscuous mode [ 671.035030] xen_bridge: port 16(vif16.0-emu) entered forwarding state [ 671.046206] xen_bridge: port 16(vif16.0-emu) entered forwarding state [ 676.365056] device vif17.0 entered promiscuous mode [ 676.536450] device vif17.0-emu entered promiscuous mode [ 676.553485] xen_bridge: port 18(vif17.0-emu) entered forwarding state [ 676.564818] xen_bridge: port 18(vif17.0-emu) entered forwarding state [ 681.878003] xen-blkback:ring-ref 8, event-channel 11, protocol 2 (x86_32-abi) persistent grants [ 682.008707] xen_bridge: port 15(vif16.0) entered forwarding state [ 682.019953] xen_bridge: port 15(vif16.0) entered forwarding state [ 686.076526] xen_bridge: port 16(vif16.0-emu) entered forwarding state [ 688.593383] xen-blkback:ring-ref 8, event-channel 11, protocol 2 (x86_32-abi) persistent grants [ 688.850970] xen_bridge: port 17(vif17.0) entered forwarding state [ 688.862334] xen_bridge: port 17(vif17.0) entered forwarding state [ 691.572695] xen_bridge: port 18(vif17.0-emu) entered forwarding state [ 697.068634] xen_bridge: port 15(vif16.0) entered forwarding state [ 703.898684] xen_bridge: port 17(vif17.0) entered forwarding state [ 2587.229286] xen_bridge: port 17(vif17.0) entered disabled state [ 2587.247719] device vif17.0 left promiscuous mode [ 2587.265580] xen_bridge: port 17(vif17.0) entered disabled state [ 2587.337375] xen_bridge: port 18(vif17.0-emu) entered disabled state [ 2587.355307] device vif17.0-emu left promiscuous mode [ 2587.372756] xen_bridge: port 18(vif17.0-emu) entered disabled state [ 3924.409203] xen_bridge: port 13(vif15.0) entered disabled state [ 3924.426560] device vif15.0 left promiscuous mode [ 3924.443446] xen_bridge: port 13(vif15.0) entered disabled state [ 3924.553244] xen_bridge: port 14(vif15.0-emu) entered disabled state [ 3924.569945] device vif15.0-emu left promiscuous mode [ 3924.586112] xen_bridge: port 14(vif15.0-emu) entered disabled state [ 3930.678757] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 3930.699199] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf98fe004) [ 3930.715163] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 3930.730672] pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002) [ 3930.951934] pciback 0000:06:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a) [ 3930.967103] pciback 0000:06:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xf9a00004) [ 3930.981915] pciback 0000:06:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10) [ 3930.996397] pciback 0000:06:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002) [18496.013743] xenwatch: page allocation failure: order:7, mode:0x10c0d0 [18496.031948] Pid: 54, comm: xenwatch Not tainted 3.9.0-rc8-20130424-jens+ #1 [18496.049897] Call Trace: [18496.067674] [] warn_alloc_failed+0xf1/0x140 [18496.085453] [] ? trace_hardirqs_on+0xd/0x10 [18496.102951] [] ? on_each_cpu_mask+0x94/0xd0 [18496.120270] [] __alloc_pages_nodemask+0x69f/0x960 [18496.137306] [] alloc_pages_current+0xb1/0x160 [18496.154051] [] __get_free_pages+0x9/0x40 [18496.170579] [] __kmalloc+0x134/0x160 [18496.186921] [] xen_blkbk_probe+0x170/0x2f0 [18496.202963] [] xenbus_dev_probe+0x77/0x130 [18496.218714] [] ? __driver_attach+0xa0/0xa0 [18496.234237] [] driver_probe_device+0x81/0x220 [18496.249605] [] ? klist_next+0x8c/0x110 [18496.264681] [] ? __driver_attach+0xa0/0xa0 [18496.279500] [] __device_attach+0x4b/0x50 [18496.294138] [] bus_for_each_drv+0x68/0x90 [18496.308553] [] device_attach+0x89/0x90 [18496.322694] [] bus_probe_device+0xa8/0xd0 [18496.336640] [] device_add+0x650/0x720 [18496.350209] [] ? device_pm_sleep_init+0x43/0x70 [18496.363602] [] device_register+0x19/0x20 [18496.376721] [] xenbus_probe_node+0x14b/0x160 [18496.389611] [] ? bus_for_each_dev+0xa4/0xb0 [18496.402298] [] xenbus_dev_changed+0x1bc/0x1c0 [18496.414732] [] ? lock_release+0x117/0x260 [18496.426904] [] backend_changed+0x16/0x20 [18496.438835] [] xenwatch_thread+0x4e/0x150 [18496.450579] [] ? wake_up_bit+0x40/0x40 [18496.462048] [] ? xs_watch+0x60/0x60 [18496.473286] [] kthread+0xd6/0xe0 [18496.484235] [] ? __init_kthread_worker+0x70/0x70 [18496.494987] [] ret_from_fork+0x7c/0xb0 [18496.505560] [] ? __init_kthread_worker+0x70/0x70 [18496.515949] Mem-Info: [18496.526267] Node 0 DMA per-cpu: [18496.536085] CPU 0: hi: 0, btch: 1 usd: 0 [18496.545692] CPU 1: hi: 0, btch: 1 usd: 0 [18496.554949] CPU 2: hi: 0, btch: 1 usd: 0 [18496.563969] CPU 3: hi: 0, btch: 1 usd: 0 [18496.572690] CPU 4: hi: 0, btch: 1 usd: 0 [18496.581067] CPU 5: hi: 0, btch: 1 usd: 0 [18496.589120] Node 0 DMA32 per-cpu: [18496.596950] CPU 0: hi: 186, btch: 31 usd: 62 [18496.604583] CPU 1: hi: 186, btch: 31 usd: 85 [18496.611890] CPU 2: hi: 186, btch: 31 usd: 63 [18496.618950] CPU 3: hi: 186, btch: 31 usd: 84 [18496.625743] CPU 4: hi: 186, btch: 31 usd: 100 [18496.632205] CPU 5: hi: 186, btch: 31 usd: 32 [18496.638361] active_anon:2681 inactive_anon:11161 isolated_anon:0 [18496.638361] active_file:30213 inactive_file:148645 isolated_file:0 [18496.638361] unevictable:540 dirty:509 writeback:0 unstable:0 [18496.638361] free:4756 slab_reclaimable:10388 slab_unreclaimable:10266 [18496.638361] mapped:4093 shmem:316 pagetables:1177 bounce:0 [18496.638361] free_cma:0 [18496.670912] Node 0 DMA free:3864kB min:64kB low:80kB high:96kB active_anon:0kB inactive_anon:0kB active_file:140kB inactive_file:9440kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15992kB managed:15908kB mlocked:0kB dirty:60kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:2168kB slab_unreclaimable:256kB kernel_stack:8kB pagetables:4kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [18496.686284] lowmem_reserve[]: 0 884 884 884 [18496.691452] Node 0 DMA32 free:15184kB min:3772kB low:4712kB high:5656kB active_anon:10612kB inactive_anon:44648kB active_file:120756kB inactive_file:585244kB unevictable:2068kB isolated(anon):0kB isolated(file):0kB present:1032192kB managed:905896kB mlocked:2068kB dirty:1988kB writeback:0kB mapped:16232kB shmem:1268kB slab_reclaimable:39384kB slab_unreclaimable:40812kB kernel_stack:2176kB pagetables:4684kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [18496.714687] lowmem_reserve[]: 0 0 0 0 [18496.720726] Node 0 DMA: 18*4kB (UM) 16*8kB (UM) 15*16kB (UM) 21*32kB (UMR) 19*64kB (UMR) 4*128kB (MR) 4*256kB (R) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3864kB [18496.727233] Node 0 DMA32: 2014*4kB (UEMR) 549*8kB (UEMR) 39*16kB (EMR) 14*32kB (ER) 10*64kB (R) 4*128kB (R) 2*256kB (R) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 15184kB [18496.740356] 179631 total pagecache pages [18496.746941] 0 pages in swap cache [18496.753528] Swap cache stats: add 142, delete 142, find 67/73 [18496.760194] Free swap = 2097148kB [18496.766821] Total swap = 2097148kB [18496.777073] 262143 pages RAM [18496.783661] 28027 pages reserved [18496.790185] 381067 pages shared [18496.796701] 119219 pages non-shared [18496.803221] vbd vbd-18-768: 12 creating block interface [18496.811469] vbd vbd-18-768: 12 xenbus_dev_probe on backend/vbd/18/768 [18496.818901] vbd: probe of vbd-18-768 failed with error -12