Re: [Xen-devel] [XenARM] Running Xen ARM on Fast Model

["Khandelwal, Shubham" <Shubham.Khandelwal@xxxxxxxxxx>]

Hi Stefano,

This is the FAST Model command I am using.

model_shell 
/path/to/FastModelsPortfolio_8.0/examples/RTSM_VE/Build_Cortex-A15x1/Linux-Release-GCC-4.4/cadi_system_Linux-Release-GCC-4.4.so
 /path/to/xen-unstable.git-xen-arm-4.3-3/xen/xen -C 
motherboard.flashloader0.fname=/path/to/boot/zImage

Regards

Shubham Khandelwal


-----Original Message-----
From: Stefano Stabellini [mailto:stefano.stabellini@xxxxxxxxxxxxx] 
Sent: Monday, April 01, 2013 7:46 PM
To: Khandelwal, Shubham
Cc: Stefano Stabellini; 'xen-arm@xxxxxxxxxxxxx'; Datta, Souvik; 
xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: RE: [XenARM] Running Xen ARM on Fast Model

On Mon, 1 Apr 2013, Khandelwal, Shubham wrote:
> Hi Stefano,
> 
> I have done almost the same thing but with toolchain version 4.6.3. The dtb 
> file is being recognized during compiling xen as is
> evident from the output below. But still is not being recognized by the Fast 
> Model and it shows the same error.
> 
> ...
> 
> arm-linux-gnueabihf-ld -marmelf_linux_eabi -T xen.lds -N prelink.o \
> 
> ÂÂÂÂÂ ÂÂÂ 
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.0.o
>  -o
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1
> 
> arm-linux-gnueabihf-nm -n 
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1 |
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/tools/symbols
> >/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.S
> 
> make -f 
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/Rules.mk
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.o
> 
> make[3]: Entering directory 
> `/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/arch/arm'
> 
> arm-linux-gnueabihf-gcc -D__ASSEMBLY__ -include
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/include/xen/config.h
>  -O1 -fno-omit-frame-pointer -marm -g
> -fno-strict-aliasing -Wall -Wstrict-prototypes -Wdeclaration-after-statement 
> -Wno-unused-but-set-variable -fno-builtin -fno-common
> -Wredundant-decls -iwithprefix include -Werror -Wno-pointer-arith -pipe
> -I/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/include 
> -fno-stack-protector -fno-exceptions -Wnested-externs
> -msoft-float -mcpu=cortex-a15 -mfpu=vfpv3 -mfloat-abi=softfp 
> -DGCC_HAS_VISIBILITY_ATTRIBUTE -fno-optimize-sibling-calls -g
> -D__XEN__ -include 
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/include/xen/config.h
>  -DVERBOSE
> -fno-omit-frame-pointer -DCONFIG_FRAME_POINTER -MMD -MF ..xen-syms.1.o.d
> -DCONFIG_DTB_FILE=\"/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/vexpress-v2p-ca15-tc1.dtb\"
>  -c
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.S
>  -o
> /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.o
> 

Could you please post the Fast Model command line that you are using?
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel