[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2 6/6] [RFC] arm: use PSCI if available



On Tue, 26 Mar 2013, Will Deacon wrote:
> On Tue, Mar 26, 2013 at 03:25:55PM +0000, Stefano Stabellini wrote:
> > On Tue, 26 Mar 2013, Will Deacon wrote:
> > > On Tue, Mar 26, 2013 at 02:41:15PM +0000, Stefano Stabellini wrote:
> > > > +struct smp_operations __initdata psci_smp_ops = {
> > > > +       .smp_init_cpus          = psci_smp_init_cpus,
> > > > +       .smp_prepare_cpus       = psci_smp_prepare_cpus,
> > > > +       .smp_secondary_init     = psci_secondary_init,
> > > > +       .smp_boot_secondary     = psci_boot_secondary,
> > > > +};
> > > 
> > > Whilst I like the idea of this, I don't think things will pan out this
> > > nicely in practice. There will almost always be a level of indirection
> > > required between the internal Linux SMP operations and the expectations of
> > > the PSCI firmware, whether this is in CPU numbering or other,
> > > platform-specific fields in various parameters.
> > > 
> > > Tying these two things together like this confuses the layering in my
> > > opinion and will likely lead to potentially subtle breakages if platforms
> > > start trying to adopt this.
> > 
> > What you are saying is that psci could either be used directly, like we
> > are doing, or it could just be the base of some higher level platform
> > specific smp_ops.
> > 
> > Honestly I think that psci is already high level enough that I would
> > worry if somebody started to wrap it around something else.
> 
> I don't agree. PSCI is a low-level firmware interface, which will naturally
> have implementation-specific parts to it. For example, many of the CPU power
> functions have platform-specific state ID parameters which we can't just
> ignore. Furthermore, the method by which a CPU is identified needn't match
> the value in our logical map. The purpose of the PSCI code in Linux is to
> provide a basic abstraction on top of this interface, so that platforms can
> incorporate them into higher-level power management functions, which
> themselves might be plumbed into smp_operations structures.
> 
> > However we still support that use case just fine:  they can just avoid
> > having a psci node on device tree and just keep using their machine
> > specific smp_ops. It's up to them really.
> 
> Why get rid of the node? That's there to initialise the PSCI backend
> accordingly and shouldn't have anything to do with SMP.
> 
> > They can even base the implementation of their smp_ops on the current
> > psci code, in order to facilitate that I could get rid of psci_ops
> > (which initialization is based on device tree) and export the psci_cpu_*
> > functions instead, so that they can be called directly by other smp_ops.
> 
> Again, I think this destroys the layering. The whole point is that the PSCI
> functions are called from within something that understands precisely how to
> talk to the firmware and what it is capable of.

All right, I am not going to pretend to know better the final purpose of
PSCI :-)

Assuming that you are correct, I can't see any other options than
have a Xen specific override setup.c, but it's really ugly:

diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3f6cbb2..7876865 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -768,7 +768,12 @@ void __init setup_arch(char **cmdline_p)
        arm_dt_init_cpu_maps();
 #ifdef CONFIG_SMP
        if (is_smp()) {
-               smp_set_ops(mdesc->smp);
+               int rc = -ENODEV;
+#ifdef CONFIG_XEN
+               rc = xen_init_smp();
+#endif
+               if (rc)
+                       smp_set_ops(mdesc->smp);
                smp_init_cpus();
        }
 #endif


> > > If this can indeed work for the virtual platforms (Xen and KVM), then I
> > > think it would be better expressed using `virt' smp_ops, which map 
> > > directly
> > > to PSCI, rather than putting them here. Even then, it's tying KVM and Xen
> > > together on the firmware side of things...
> > 
> > Keep in mind that dom0 on Xen boots as a native machine (versatile
> > express or exynos5 for example) with a Xen hypervisor node on it.  We
> > would need to find a way to override the default machine smp_ops with
> > a set of xen_smp_ops early at boot.
> > I don't like this option very much, I think is fragile.
> 
> Why can't dom0 use whatever smp ops the native machine would use?

Because Xen doesn't export them (and it's not going to).

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.