[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Xen, oprofile, perf, PEBS, event counters, PVHVM, PV



On Tue, Jan 15, 2013 at 05:11:01PM +0000, Marcus Granado wrote:
> On 14/01/13 20:45, Konrad Rzeszutek Wilk wrote:
> >a). 32/64 compat is missing backtrace support. If you run with a 32-bit dom0
> >     and try to set the backtrace, the hypervisor sets is as 
> > -some-huge-number.
> >     It might be there are some other hypercalls that need some compat 
> > tweaks.
> 
> It's not clear to me if it is the same issue, but there was some
> work to make xenoprof's callgraph work with 32-bit domains on a
> 64-bit xen here:
> http://lists.xen.org/archives/html/xen-devel/2012-01/msg01721.html
> The patch should be nowin xen but it requires a one-linechange in
> the 32-bit dom0 kernel matching this one in xen:
> http://lists.xen.org/archives/html/xen-devel/2012-01/txt4qZ7uGGPTc.txt

Oh, those look like the patches that would help. Could you repost
them and I can review them?
> 
> >b). 32-bit dom0 oprofile toolstack truncates the EIP of 64-bit guests
> >     (or hypervisor). I am not really sure how to solve that except just
> >     not run 64-bit guests/hypervisor with a 32-bit dom0. Or make
> >     oprofile and its tools capable of doing 64-bit architecture.
> >     The vice-versa condition does not exist - so I can profile 32-bit
> >     guests using a 64-bit dom0.
> Afaics, the 32-bit dom0 oprofile.ko module receives the 64-bit eips;
> the XENOPROF_ESCAPE_CODE comparison is made as ULL in the kernel and
> seems to work. This could be happening maybe in either opcontrol,
> oprofiled or opreport, but with the patches above I obtained the
> following result in an idle 32-bit dom0, which seems to display the
> correct 64-bit memory location information for hypervisor functions:
> 
> 
> |# opreport -lwc #(functions calling other functions):|
> |CPU: Core ||2||, speed ||2493.77||MHz (estimated)|
> |Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with
> a unit mask of ||0x00||(Unhalted core cycles) count ||1000000|
> |vma      samples  % image name               app name symbol name|
> |-------------------------------------------------------------------------------|
> |||00000000000b9610 ||1||2.0000||libc-||2.5||.so python
> getaddrinfo|
> |||000000000000fad0 ||1||2.0000||libpthread-||2.5||.so python
> _fini|
> |||000000000000e790 ||3||6.0000||ld-||2.5||.so python
> _dl_fini|
> |||000000000002aec0 ||12||24.0000||libc-||2.5||.so python
> msort_with_tmp|
> |||0000000000004480||25||50.0000||_xslib.so python
> init_xslib|
> |0000000000000000||415746||22.5841||libpython2.||4||.so.||1.0||python
> /usr/lib/libpython2.||4||.so.||1.0|
> |||0000000000000000||415746||100.000||libpython2.||4||.so.||1.0||python
> /usr/lib/libpython2.||4||.so.||1.0||[self]|
> |...|
> |-------------------------------------------------------------------------------|
> |ffff82c480170470 ||36||0.1587||xen-syms qemu-dm
> send_IPI_mask_flat|
> |||ffff82c480170470 ||36||100.000||xen-syms qemu-dm
> send_IPI_mask_flat [self]|
> |-------------------------------------------------------------------------------|
> |ffff82c480120d40 ||33||0.1455||xen-syms qemu-dm
> cpumask_raise_softirq|
> |||ffff82c480120d40 ||33||100.000||xen-syms qemu-dm
> cpumask_raise_softirq [self] |
> 
> 
> 
> This quote from
> http://lists.xen.org/archives/html/xen-devel/2012-01/msg01721.htmlmay
> be useful:
> "
> 
> A few comments from my tests with oprofile 0.9.6 in userspace:
> 
> - to obtain callgraphs of the xen code, you need to enable
> theCONFIG_FRAME_POINTER flag during compilation of the xen binary,
> eg.using "make" with "frame_pointer=y".- if the oprofiled daemon is
> running in a 32-bit guest, it needs toreceive the xen-range in
> 32-bits, eg.
> --xen-image=/boot/xen-syms-4.1.1--xen-range=80100000,801fe5ee
> "
> 
> >   h). There are some counters in the hypervisor for the oprofile 
> > statistics, like
> >    lost samples, etc. I does not look like they are exported/printed 
> > anywhere. Perhaps
> >    an 'register_keyhandler' should be written to dump those (and also which 
> > domains
> >    are profiled).
> 
> I see some lost sample information when I run 'opcontrol --start
> --verbose=all', 'opcontrol --deinit' and look at oprofiled.log, are
> these the counters you are looking for?

No. I was thinking

 44 static u64 total_samples;
 45 static u64 invalid_buffer_samples;
 46 static u64 corrupted_buffer_samples;
 47 static u64 lost_samples;
 48 static u64 active_samples;
 49 static u64 passive_samples;
 50 static u64 idle_samples;
 51 static u64 others_samples;

in common/xenoprof.c

> # cat /var/lib/oprofile/samples/oprofiled.log
> oprofiled started Tue Jan 15 16:02:00 2013
> kernel pointer size: 4
> Tue Jan 15 16:04:34 2013
> -- OProfile Statistics --
> Nr. sample dumps: 4
> Nr. non-backtrace samples: 25508
> Nr. kernel samples: 14344
> Nr. lost samples (no kernel/user): 0
> Nr. lost kernel samples: 0
> Nr. incomplete code structs: 0
> Nr. samples lost due to sample file open failure: 4569
> Nr. samples lost due to no permanent mapping: 78
> Nr. event lost due to buffer overflow: 0
> Nr. samples lost due to no mapping: 20
> Nr. backtraces skipped due to no file mapping: 0
> Nr. samples lost due to no mm: 4727
> ---- Statistics for cpu : 3
> Nr. samples lost cpu buffer overflow: 0
> Nr. samples received: 11734
> Nr. backtrace aborted: 0
> Nr. samples lost invalid pc: 0
> ...
> 
> 
> >  i). opreports often tells me
> >         warning: /domain1-apps could not be found.
> >         warning: /domain1-modules could not be found.
> >         warning: /domain1-xen-unknown could not be found.
> >         warning: /domain2-apps could not be found.
> >         warning: /domain2-modules could not be found.
> >         warning: /domain2-xen-unknown could not be found.
> >         warning: /domain3-apps could not be found.
> >         warning: /domain3-modules could not be found.
> >         warning: /domain3-xen-unknown could not be found.
> >         warning: /vmlinux-unknown could not be found.
> >         warning: /xen-unknown could not be found.
> 
> These warnings remind me of what I was receiving for the dom0 kernel
> modules, I fixed them by using -p for the modules in opreport:
> # opreport -l -p/usr/lib/debug/lib/modules/`uname -r`
> I guess opreport may be in need of this parameter pointing to the
> guest kernel symbols.

OK. I will try that out.

> 
> >And it occurs to me it could be possible be to make some inroads on making
> >performance monitoring easier:
> >
> >   1). fix the glaring omissions in oprofile for the new CPUs
> >   2). Add a register keyhandle to get some debug info.
> >   3). piggyback on oprofile hypercalls and insert some bridge in perf (lots
> >       of handwaving here). Or perhaps emulate in the Linux kernel the
> >       wmsrs (so xen_safe_wrmsrs) and have the pvops kernel based on the MSRs
> >       make the hypercalls to setup the buffers, etc.
> >
> >      3a). new hypercalls? intercept rdmsr/wrmsrs and stuff the right data
> >       in the initial domain? Other thoughts?
> >
> >   4). Extend perf to have '--xen' so it can also look at the xen-hypervisor
> >       ELF file.
> 
> 5) live event reports from xenoprof/opreport, ala perf top.
> 6) ports of oprofile kernel modules for other oses (bsd, windows,
> mirage), so that these oses can be used as active participants.

Great!Thank you for adding those in.
> 
> cheers,
> Marcus
> 
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.