[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH 2/2] xen/arm: initialize the GIC irq properties of interrupts routed to guests



We are currently initializing GIC irq properties (ITARGETSR, IPRIORITYR,
and GICD_ICFGR) only in gic_route_irq, that is not called for guest
interrupts at all.
Move the initialization into a separate function
(gic_set_irq_properties) and call it from gic_route_irq_to_guest.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
---
 xen/arch/arm/gic.c |   49 +++++++++++++++++++++++++++++++------------------
 1 files changed, 31 insertions(+), 18 deletions(-)

diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 8c00a1c..9f20c0f 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -174,12 +174,36 @@ static hw_irq_controller gic_guest_irq_type = {
     .set_affinity = gic_irq_set_affinity,
 };
 
+/* needs to be called with gic.lock held */
+static void gic_set_irq_properties(unsigned int irq, bool_t level,
+        unsigned int cpu_mask, unsigned int priority)
+{
+    volatile unsigned char *bytereg;
+    uint32_t cfg, edgebit;
+
+    /* Set edge / level */
+    cfg = GICD[GICD_ICFGR + irq / 16];
+    edgebit = 2u << (2 * (irq % 16));
+    if ( level )
+        cfg &= ~edgebit;
+    else
+        cfg |= edgebit;
+    GICD[GICD_ICFGR + irq / 16] = cfg;
+
+    /* Set target CPU mask (RAZ/WI on uniprocessor) */
+    bytereg = (unsigned char *) (GICD + GICD_ITARGETSR);
+    bytereg[irq] = cpu_mask;
+
+    /* Set priority */
+    bytereg = (unsigned char *) (GICD + GICD_IPRIORITYR);
+    bytereg[irq] = priority;
+
+}
+
 /* Program the GIC to route an interrupt */
 static int gic_route_irq(unsigned int irq, bool_t level,
                          unsigned int cpu_mask, unsigned int priority)
 {
-    volatile unsigned char *bytereg;
-    uint32_t cfg, edgebit;
     struct irq_desc *desc = irq_to_desc(irq);
     unsigned long flags;
 
@@ -202,22 +226,7 @@ static int gic_route_irq(unsigned int irq, bool_t level,
     /* Disable interrupt */
     desc->handler->shutdown(desc);
 
-    /* Set edge / level */
-    cfg = GICD[GICD_ICFGR + irq / 16];
-    edgebit = 2u << (2 * (irq % 16));
-    if ( level )
-        cfg &= ~edgebit;
-    else
-        cfg |= edgebit;
-    GICD[GICD_ICFGR + irq / 16] = cfg;
-
-    /* Set target CPU mask (RAZ/WI on uniprocessor) */
-    bytereg = (unsigned char *) (GICD + GICD_ITARGETSR);
-    bytereg[irq] = cpu_mask;
-
-    /* Set priority */
-    bytereg = (unsigned char *) (GICD + GICD_IPRIORITYR);
-    bytereg[irq] = priority;
+    gic_set_irq_properties(irq, level, cpu_mask, priority);
 
     spin_unlock(&gic.lock);
     spin_unlock_irqrestore(&desc->lock, flags);
@@ -555,10 +564,13 @@ int gic_route_irq_to_guest(struct domain *d, unsigned int 
irq,
     action->name = devname;
 
     spin_lock_irqsave(&desc->lock, flags);
+    spin_lock(&gic.lock);
 
     desc->handler = &gic_guest_irq_type;
     desc->status |= IRQ_GUEST;
 
+    gic_set_irq_properties(irq, 1, 1u << smp_processor_id(), 0xa0);
+
     retval = __setup_irq(desc, irq, action);
     if (retval) {
         xfree(action);
@@ -566,6 +578,7 @@ int gic_route_irq_to_guest(struct domain *d, unsigned int 
irq,
     }
 
 out:
+    spin_unlock(&gic.lock);
     spin_unlock_irqrestore(&desc->lock, flags);
     return retval;
 }
-- 
1.7.2.5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.