|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] intel IGD driver intel_detect_pch() failure
On Thu, Dec 13, 2012 at 8:43 PM, Stefano Stabellini
<stefano.stabellini@xxxxxxxxxxxxx> wrote:
>
> Does this patch work for you?
>
It appears that you change the exposed 1f.0 bridge into an ISA bridge.
The driver should be able to recognize it -- as long as it is not
hidden by the PIIX3 bridge.
I wonder if there is way to entirely override that one...
But anyway I'll try it out first.
>
>
> diff --git a/hw/pci.c b/hw/pci.c
> index f051de1..d371bd7 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -871,11 +871,6 @@ void pci_unplug_netifs(void)
> }
> }
>
> -typedef struct {
> - PCIDevice dev;
> - PCIBus *bus;
> -} PCIBridge;
> -
> void pci_bridge_write_config(PCIDevice *d,
> uint32_t address, uint32_t val, int len)
> {
> diff --git a/hw/pci.h b/hw/pci.h
> index edc58b6..c2acab9 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -222,6 +222,11 @@ struct PCIDevice {
> int irq_state[4];
> };
>
> +typedef struct {
> + PCIDevice dev;
> + PCIBus *bus;
> +} PCIBridge;
> +
> extern char direct_pci_str[];
> extern int direct_pci_msitranslate;
> extern int direct_pci_power_mgmt;
> diff --git a/hw/pt-graphics.c b/hw/pt-graphics.c
> index c6f8869..d8e789f 100644
> --- a/hw/pt-graphics.c
> +++ b/hw/pt-graphics.c
> @@ -3,6 +3,7 @@
> */
>
> #include "pass-through.h"
> +#include "pci.h"
> #include "pci/header.h"
> #include "pci/pci.h"
>
> @@ -40,9 +41,26 @@ void intel_pch_init(PCIBus *bus)
> did = pt_pci_host_read(pci_dev_1f, PCI_DEVICE_ID, 2);
> rid = pt_pci_host_read(pci_dev_1f, PCI_REVISION, 1);
>
> - if ( vid == PCI_VENDOR_ID_INTEL )
> - pci_bridge_init(bus, PCI_DEVFN(0x1f, 0), vid, did, rid,
> - pch_map_irq, "intel_bridge_1f");
> + if (vid == PCI_VENDOR_ID_INTEL) {
> + PCIBridge *s = (PCIBridge *)pci_register_device(bus,
> "intel_bridge_1f",
> + sizeof(PCIBridge), PCI_DEVFN(0x1f, 0), NULL,
> pci_bridge_write_config);
> +
> + pci_config_set_vendor_id(s->dev.config, vid);
> + pci_config_set_device_id(s->dev.config, did);
> +
> + s->dev.config[PCI_COMMAND] = 0x06; // command = bus master, pci mem
> + s->dev.config[PCI_COMMAND + 1] = 0x00;
> + s->dev.config[PCI_STATUS] = 0xa0; // status = fast back-to-back,
> 66MHz, no error
> + s->dev.config[PCI_STATUS + 1] = 0x00; // status = fast devsel
> + s->dev.config[PCI_REVISION] = rid;
> + s->dev.config[PCI_CLASS_PROG] = 0x00; // programming i/f
> + pci_config_set_class(s->dev.config, PCI_CLASS_BRIDGE_ISA);
> + s->dev.config[PCI_LATENCY_TIMER] = 0x10;
> + s->dev.config[PCI_HEADER_TYPE] = 0x81;
> + s->dev.config[PCI_SEC_STATUS] = 0xa0;
> +
> + s->bus = pci_register_secondary_bus(&s->dev, pch_map_irq);
> + }
> }
>
> uint32_t igd_read_opregion(struct pt_dev *pci_dev)
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |