Re: [Xen-devel] LVM Checksum error when using persistent grants (#linux-next + stable/for-jens-3.8)

[Roger Pau Monné <roger.pau@xxxxxxxxxx>]

On 07/12/12 15:22, Konrad Rzeszutek Wilk wrote:
> On Wed, Dec 05, 2012 at 10:14:55PM -0500, Konrad Rzeszutek Wilk wrote:
>> Hey Roger,
>>
>> I am seeing this weird behavior when using #linux-next + stable/for-jens-3.8 
>> tree.
> 
> To make it easier I just used v3.7-rc8 and merged stable/for-jens-3.8
> tree.
> 
>>
>> Basically I can do 'pvscan' on xvd* disk and quite often I get checksum 
>> errors:
>>
>> # pvscan /dev/xvdf
>>   PV /dev/xvdf2   VG VolGroup00        lvm2 [18.88 GiB / 0    free]
>>   PV /dev/dm-14   VG vg_x86_64-pvhvm   lvm2 [4.00 GiB / 68.00 MiB free]
>>   PV /dev/dm-12   VG vg_i386-pvhvm     lvm2 [4.00 GiB / 68.00 MiB free]
>>   PV /dev/dm-11   VG vg_i386           lvm2 [4.00 GiB / 68.00 MiB free]
>>   PV /dev/sda     VG guests            lvm2 [931.51 GiB / 220.51 GiB free]
>>   Total: 5 [962.38 GiB] / in use: 5 [962.38 GiB] / in no VG: 0 [0   ]
>> # pvscan /dev/xvdf
>>   /dev/xvdf2: Checksum error
>>   Couldn't read volume group metadata.
>>   /dev/xvdf2: Checksum error
>>   Couldn't read volume group metadata.
>>   PV /dev/dm-14   VG vg_x86_64-pvhvm   lvm2 [4.00 GiB / 68.00 MiB free]
>>   PV /dev/dm-12   VG vg_i386-pvhvm     lvm2 [4.00 GiB / 68.00 MiB free]
>>   PV /dev/dm-11   VG vg_i386           lvm2 [4.00 GiB / 68.00 MiB free]
>>   PV /dev/sda     VG guests            lvm2 [931.51 GiB / 220.51 GiB free]
>>   Total: 4 [943.50 GiB] / in use: 4 [943.50 GiB] / in no VG: 0 [0   ]
>>
>> This is with a i386 dom0, 64-bit Xen 4.1.3 hypervisor, and with either
>> 64-bit or 32-bit PV or PVHVM guest.
> 
> And it does not matter if dom0 is 64-bit.
>>
>> Have you seen something like this?
> 
> More interestingly is that the failure is the frontend. I ran the "new"
> guests that do persistent grants with the old backends (so v3.7-rc8
> virgin) and still got the same failure.
> 
>>
>> Note, the other LV disks are over iSCSI and are working fine.

I've found the problem, this happens when you copy only a part of the
shared data in blkif_completion, this is an example of the problem:


1st loop in rq_for_each_segment
 * bv_offset: 3584
 * bv_len: 512
 * offset += bv_len
 * i: 0

2nd loop:
 * bv_offset: 0
 * bv_len: 512
 * i: 0

As you can see, in the second loop i is still 0 (because offset is
only 512, so 512 >> PAGE_SHIFT is 0) when it should be 1.

This problem made me realize another corner case, which I don't
know if can happen, AFAIK I've never seen it:


1st loop in rq_for_each_segment
 * bv_offset: 1024
 * bv_len: 512
 * offset += len
 * i: 0

2nd loop:
 * bv_offset: 0
 * bv_len: 512
 * i: 0
        
In this second case, should i be 1? Can this really happen? I can't see
anyway to get a "global offset" or something similar, that's not realtive
to the bvec being handled right now.

For the problem that you described a quick fix follows, but it doesn't
cover the second case exposed above:

---
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index df21b05..6e155d0 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -869,7 +871,7 @@ static void blkif_completion(struct blk_shadow *s, struct 
blkfront_info *info,
                                bvec->bv_len);
                        bvec_kunmap_irq(bvec_data, &flags);
                        kunmap_atomic(shared_data);
-                       offset += bvec->bv_len;
+                       offset = (i * PAGE_SIZE) + (bvec->bv_offset + 
bvec->bv_len);
                }
        }
        /* Add the persistent grant into the list of free grants */

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel