Re: [Xen-devel] dom0 linux 3.6.0-rc4, crash due to ballooning althoug dom0_mem=X, max:X set

[Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>]

On Wed, Sep 05, 2012 at 04:38:48PM +0200, Sander Eikelenboom wrote:
> 
> Wednesday, September 5, 2012, 4:06:01 PM, you wrote:
> 
> > On Tue, Sep 04, 2012 at 04:27:20PM -0400, Robert Phillips wrote:
> >> Ben,
> >> 
> >> You have asked me to provide the rationale behind the gnttab_old_mfn 
> >> patch, which you emailed to Sander earlier today. 
> >> Here are my findings.
> >> 
> >> I found that xen_blkbk_map() in drivers/block/xen-blkback/blkback.c has 
> >> changed from our previous version.  It now calls gnttab_map_refs() in 
> >> drivers/xen/grant-table.c.
> >> 
> >> That function first calls 
> >> HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, ... ) and then calls 
> >> m2p_add_override() in p2m.c
> 
> > And HYPERVISOR_grant_table_op .. would populate map_ops[i].bus_addr with 
> > the machine address..
> 
> >> which is where I made my change.
> >> 
> >> The unpatched code was saving the pfn's old mfn in kmap_op->dev_bus_addr.  
> >> 
> >> kmap_op is of type struct gnttab_map_grant_ref.  That data type is used to 
> >> record grant table mappings so later they can be unmapped correctly.
> 
> > Right, but the blkback makes a distinction by passing NULL as kmap_op, 
> > which means it should
> > use the old mechanism. Meaning that once the hypercall is done, the 
> > map_ops[i].bus_addr is not
> > used anymore..
> 
> >> 
> >> The problem with saving the old mfn in kmap_op->dev_bus_addr is that it is 
> >> later overwritten by __gnttab_map_grant_ref() in xen/common/grant_table.c
> 
> > Uh, so the problem of saving the old mfn in dev_bus_addr has been there for 
> > a long long time then?
> > Even before this patch set?
> >> 
> >> Since the storage holding the old mfn got overwritten, the unmapping was 
> >> being done incorrectly.  The balloon code detected that and bugged at 
> >> drivers/xen/balloon.c:359
> >> 
> 
> > Hmm, I believe the storage for holding the old mfn was/is page->index.
> 
> 
> >> My patch simply adds another member called old_mfn to struct 
> >> gnttab_map_grant_ref rather than trying to overload dev_bus_addr.
> >> 
> >> I don't know if Sander's bug is the same or related.  The BUG_ON at 
> >> drivers/xen/balloon.c:359 is quite general.  It simply asserts that we are 
> >> not trying to re-map a valid mapping.
> 
> > Right. Somehow he ends up with valid mappings where there should be none. 
> > And lots of them.
> 
> It's something between kernel v3.4.1 and v3.5.3, haven't had time to narrow 
> it down yet.
> Any suggestions for specific commits i could try to quickly bisect this one ?

These are the ones that went in:

ea61fc0 xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back.
b9e0d95 xen: mark local pages as FOREIGN in the m2p_override
6878c32 xen/blkfront: Add WARN to deal with misbehaving backends.
5e62625 xen/setup: filter APERFMPERF cpuid feature out
8c9ce60 xen/blkback: Copy id field when doing BLKIF_DISCARD.
58b7b53 xen/balloon: Subtract from xen_released_pages the count that is 
populated.
780dbcd xen/pci: Check for PCI bridge before using it.
5e152e6 xen/events: Add WARN_ON when quick lookup found invalid type.
5842f57 xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness.
a32c88b xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN
2e5ad6b xen/hvc: Collapse error logic.
7664810 xen: do not disable netfront in dom0
68c2c39 xen: do not map the same GSI twice in PVHVM guests.
201a52b hvc_xen: NULL dereference on allocation failure
d79d595 xen: Add selfballoning memory reservation tunable.
d2fb4c5 xenbus: Add support for xenbus backend in stub domain
2f1bd67 xen/smp: unbind irqworkX when unplugging vCPUs.
87e4baa x86/xen/apic: Add missing #include <xen/xen.h>
323f90a xen-acpi-processor: Add missing #include <xen/xen.h>
8605067 xen-blkfront: module exit handling adjustments
e77c78c xen-blkfront: properly name all devices
f62805f xen: enter/exit lazy_mmu_mode around m2p_override calls
211063d xen/acpi/sleep: Enable ACPI sleep via the __acpi_os_prepare_sleep
1ff2b0c xen: implement IRQ_WORK_VECTOR handler
f447d56 xen: implement apic ipi interface
83d51ab xen/setup: update VA mapping when releasing memory during setup
96dc08b xen/setup: Combine the two hypercall functions - since they are quite 
similar.
2e2fb75 xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to 
E820 RAM
ca11823 xen/setup: Only print "Freeing XXX-YYY pfn range: Z pages freed" if Z > 0
9438ef7 x86/apic: Fix UP boot crash
ab6ec39 xen/apic: implement io apic read with hypercall
27abd14 Revert "xen/x86: Workaround 'x86/ioapic: Add register level checks to 
detect bogus io-apic entries'"
31b3c9d xen/x86: Implement x86_apic_ops
4a8e2a3 x86/apic: Replace io_apic_ops with x86_io_apic_ops.
977f857 PCI: move mutex locking out of pci_dev_reset function
569ca5b xen/gnttab: add deferred freeing logic
9fe2a70 debugfs: Add support to print u32 array in debugfs
940713b xen/p2m: An early bootup variant of set_phys_to_machine
d509685 xen/p2m: Collapse early_alloc_p2m_middle redundant checks.
cef4cca xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on 
argument
3f3aaea xen/p2m: Move code around to allow for better re-usage.


Narrowing this down (so ignore APIC bootup, drivers, etc) these could be it:

b9e0d95 xen: mark local pages as FOREIGN in the m2p_override
58b7b53 xen/balloon: Subtract from xen_released_pages the count that is 
populated.
d79d595 xen: Add selfballoning memory reservation tunable.
f62805f xen: enter/exit lazy_mmu_mode around m2p_override calls
83d51ab xen/setup: update VA mapping when releasing memory during setup
96dc08b xen/setup: Combine the two hypercall functions - since they are quite 
similar.
2e2fb75 xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to 
E820 RAM
ca11823 xen/setup: Only print "Freeing XXX-YYY pfn range: Z pages freed" if Z > 0
940713b xen/p2m: An early bootup variant of set_phys_to_machine
d509685 xen/p2m: Collapse early_alloc_p2m_middle redundant checks.
cef4cca xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on 
argument
3f3aaea xen/p2m: Move code around to allow for better re-usage.

About nine of them deal with dom0_mem=max ballooning up right, so if you
ignore those:

b9e0d95 xen: mark local pages as FOREIGN in the m2p_override
d79d595 xen: Add selfballoning memory reservation tunable.
f62805f xen: enter/exit lazy_mmu_mode around m2p_override calls

Try reverting any of those.

And if nothing works there then we can try to revert the ones that
deal with 'dom0_mem=max:XX'..

I also need to be able to reproduce this. You said you can only reproduce this
on your Intel box - is this a fast Intel machine? It also looks like you only
have 2GB in the machine - and reserve 1GB to the dom0.

If you manually (so don't start the guest), balloon down - say to 512MB and 
then launch
a guest do you see this problem?

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel