[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-24-generic (smb@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38+xendbg2 SMP Wed May 2 13:46:26 UTC 2012 (Ubuntu 3.2.0-24.38+xendbg2-generic 3.2.16) [ 0.000000] Command line: placeholder root=UUID=f2b75052-a98e-447a-bf78-51b2e1b15b8b ro nomodeset debug console=hvc0 loglevel=10 earlyprintk=xenboot [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Freeing 96-100 pfn range: 106 pages freed [ 0.000000] 1-1 mapping on 96->100 [ 0.000000] 1-1 mapping on dfe90->100000 [ 0.000000] Released 106 pages of unused memory [ 0.000000] Set 131546 page(s) to 1-1 mapping [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000000096000 (usable) [ 0.000000] Xen: 0000000000096800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000dfe90000 (usable) [ 0.000000] Xen: 00000000dfe9e000 - 00000000dfea0000 type 9 [ 0.000000] Xen: 00000000dfea0000 - 00000000dfeb2000 (ACPI data) [ 0.000000] Xen: 00000000dfeb2000 - 00000000dfee0000 (ACPI NVS) [ 0.000000] Xen: 00000000dfee0000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000002e0170000 (usable) [ 0.000000] Xen: 00000002e0170000 - 0000000820000000 (unusable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Supermicro H8SGL/H8SGL, BIOS 1.1a 02/17/11 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x2e0170 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xdfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 04782000 [ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe90000 [ 0.000000] 0000000000 - 00dfe90000 page 4k [ 0.000000] kernel direct mapping tables up to dfe90000 @ 8fb000-1000000 [ 0.000000] xen: setting RW the range fd4000 - 1000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000002e0170000 [ 0.000000] 0100000000 - 02e0170000 page 4k [ 0.000000] kernel direct mapping tables up to 2e0170000 @ 3e8f2000-40000000 [ 0.000000] xen: setting RW the range 3f7fb000 - 40000000 [ 0.000000] RAMDISK: 02060000 - 04782000 [ 0.000000] ACPI: RSDP 00000000000f9fc0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000dfea0100 00084 (v01 SMCI 20110217 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dfea0290 000F4 (v04 021711 FACP1552 20110217 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dfea0610 05A04 (v02 1A711 1A711000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dfeb2000 00040 [ 0.000000] ACPI: APIC 00000000dfea0390 000B8 (v02 021711 APIC1552 20110217 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dfea0450 0003C (v01 021711 OEMMCFG 20110217 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dfeb2040 00075 (v01 021711 OEMB1552 20110217 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dfeaa610 00038 (v01 021711 OEMHPET 20110217 MSFT 00000097) [ 0.000000] ACPI: IVRS 00000000dfeaa650 000A8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SRAT 00000000dfeaa700 00128 (v02 AMD F10 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000dfeaa830 0143C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: EINJ 00000000dfeabc70 00130 (v01 AMIER AMI_EINJ 20110217 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000dfeabe00 00030 (v01 AMIER AMI_BERT 20110217 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000dfeabe30 001B0 (v01 AMIER AMI_ERST 20110217 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000dfeabfe0 000A8 (v01 AMIER ABC_HEST 20110217 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of physical nodes 2 [ 0.000000] Node 0 using interleaving mode 1/0 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000002e0170000 [ 0.000000] Initmem setup node 0 0000000000000000-00000002e0170000 [ 0.000000] NODE_DATA [000000003fffb000 - 000000003fffffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x002e0170 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000096 [ 0.000000] 0: 0x00000100 -> 0x000dfe90 [ 0.000000] 0: 0x00100000 -> 0x002e0170 [ 0.000000] On node 0 totalpages: 2883462 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1758 pages reserved [ 0.000000] DMA zone: 2152 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 896720 pages, LIFO batch:31 [ 0.000000] Normal zone: 30726 pages used for memmap [ 0.000000] Normal zone: 1935722 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x10, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 12 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfe90000 - 00000000dfe9e000 [ 0.000000] PM: Registered nosave memory: 00000000dfe9e000 - 00000000dfea0000 [ 0.000000] PM: Registered nosave memory: 00000000dfea0000 - 00000000dfeb2000 [ 0.000000] PM: Registered nosave memory: 00000000dfeb2000 - 00000000dfee0000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.2 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fe5b000 s83072 r8192 d23424 u114688 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2834594 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: placeholder root=UUID=f2b75052-a98e-447a-bf78-51b2e1b15b8b ro nomodeset debug console=hvc0 loglevel=10 earlyprintk=xenboot [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff88002f200000 - ffff880033200000 [ 0.000000] software IO TLB at phys 0x2f200000 - 0x33200000 [ 0.000000] Memory: 717456k/12060096k available (6654k kernel code, 526248k absent, 10816392k reserved, 6550k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:3072 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] allocated 93323264 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2000.194 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.38 BogoMIPS (lpj=8000776) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Yama: becoming mindful. [ 0.008042] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.017234] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.019934] Mount-cache hash table entries: 256 [ 0.020139] Initializing cgroup subsys cpuacct [ 0.020151] Initializing cgroup subsys memory [ 0.020169] Initializing cgroup subsys devices [ 0.020175] Initializing cgroup subsys freezer [ 0.020181] Initializing cgroup subsys blkio [ 0.020197] Initializing cgroup subsys perf_event [ 0.020269] tseg: 00dff00000 [ 0.020276] CPU: Physical Processor ID: 0 [ 0.020281] CPU: Processor Core ID: 0 [ 0.023239] ACPI: Core revision 20110623 [ 0.039296] ftrace: allocating 27102 entries in 107 pages [ 0.040130] cpu 0 spinlock event irq 273 [ 0.040230] Performance Events: Broken PMU hardware detected, using software events only. [ 0.040496] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.040627] installing Xen timer for CPU 1 [ 0.040646] cpu 1 spinlock event irq 279 [ 0.040849] NMI watchdog disabled (cpu1): hardware events not enabled [ 0.040971] installing Xen timer for CPU 2 [ 0.040989] cpu 2 spinlock event irq 285 [ 0.041147] NMI watchdog disabled (cpu2): hardware events not enabled [ 0.041260] installing Xen timer for CPU 3 [ 0.041275] cpu 3 spinlock event irq 291 [ 0.041438] NMI watchdog disabled (cpu3): hardware events not enabled [ 0.041555] installing Xen timer for CPU 4 [ 0.041570] cpu 4 spinlock event irq 297 [ 0.041750] NMI watchdog disabled (cpu4): hardware events not enabled [ 0.041875] installing Xen timer for CPU 5 [ 0.041891] cpu 5 spinlock event irq 303 [ 0.042052] NMI watchdog disabled (cpu5): hardware events not enabled [ 0.042166] installing Xen timer for CPU 6 [ 0.042183] cpu 6 spinlock event irq 309 [ 0.042338] NMI watchdog disabled (cpu6): hardware events not enabled [ 0.042455] installing Xen timer for CPU 7 [ 0.042470] cpu 7 spinlock event irq 315 [ 0.042631] NMI watchdog disabled (cpu7): hardware events not enabled [ 0.042664] Brought up 8 CPUs [ 0.042893] devtmpfs: initialized [ 0.045288] EVM: security.selinux [ 0.045292] EVM: security.SMACK64 [ 0.045296] EVM: security.capability [ 0.045372] PM: Registering ACPI NVS region at dfeb2000 (188416 bytes) [ 0.045372] Grant table initialized [ 0.045372] print_constraints: dummy: [ 0.045372] RTC time: 14:45:52, date: 05/02/12 [ 0.045372] NET: Registered protocol family 16 [ 0.045372] Trying to unpack rootfs image as initramfs... [ 0.060269] node 0 link 0: io port [1000, ffffff] [ 0.060283] TOM: 00000000e0000000 aka 3584M [ 0.060290] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.060301] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.060309] node 0 link 0: mmio [f0000000, ffffffff] [ 0.060317] node 0 link 0: mmio [a0000, bffff] [ 0.060325] TOM2: 0000000820000000 aka 33280M [ 0.060330] bus: [00, 1f] on node 0 link 0 [ 0.060335] bus: 00 index 0 [io 0x0000-0xffff] [ 0.060340] bus: 00 index 1 [mem 0xf0000000-0xffffffff] [ 0.060345] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.060350] bus: 00 index 3 [mem 0x820000000-0xfcffffffff] [ 0.060374] Extended Config Space enabled on 2 nodes [ 0.060542] ACPI: bus type pci registered [ 0.060651] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.060660] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.180907] Freeing initrd memory: 40072k freed [ 0.219808] PCI: Using configuration type 1 for base access [ 0.221344] bio: create slab at 0 [ 0.221344] ACPI: Added _OSI(Module Device) [ 0.221344] ACPI: Added _OSI(Processor Device) [ 0.221344] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.221344] ACPI: Added _OSI(Processor Aggregator Device) [ 0.225715] ACPI: EC: Look up EC in DSDT [ 0.230192] ACPI: Executed 2 blocks of module-level executable AML code [ 0.253658] ACPI: Interpreter enabled [ 0.253667] ACPI: (supports S0 S1 S4 S5) [ 0.253712] ACPI: Using IOAPIC for interrupt routing [ 0.267237] ACPI: No dock devices found. [ 0.267301] HEST: Table parsing has been initialized. [ 0.267309] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.267617] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.268211] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.268218] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.268224] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.268230] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.268237] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.268279] pci 0000:00:00.0: [1002:5a13] type 0 class 0x000600 [ 0.268473] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806 [ 0.268677] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604 [ 0.268795] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.268804] pci 0000:00:09.0: PME# disabled [ 0.268845] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604 [ 0.268962] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.268970] pci 0000:00:0a.0: PME# disabled [ 0.269065] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.269102] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.269125] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.269145] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.269165] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.269185] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.269205] pci 0000:00:11.0: reg 24: [mem 0xfe9fa400-0xfe9fa7ff] [ 0.269314] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.269341] pci 0000:00:12.0: reg 10: [mem 0xfe9f6000-0xfe9f6fff] [ 0.269465] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.269492] pci 0000:00:12.1: reg 10: [mem 0xfe9f7000-0xfe9f7fff] [ 0.269625] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.269663] pci 0000:00:12.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff] [ 0.269821] pci 0000:00:12.2: supports D1 D2 [ 0.269826] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.269836] pci 0000:00:12.2: PME# disabled [ 0.269875] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.269902] pci 0000:00:13.0: reg 10: [mem 0xfe9f8000-0xfe9f8fff] [ 0.270026] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.270053] pci 0000:00:13.1: reg 10: [mem 0xfe9f9000-0xfe9f9fff] [ 0.270190] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.270228] pci 0000:00:13.2: reg 10: [mem 0xfe9fac00-0xfe9facff] [ 0.270418] pci 0000:00:13.2: supports D1 D2 [ 0.270423] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.270432] pci 0000:00:13.2: PME# disabled [ 0.270477] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.270668] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.270812] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.270893] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.270921] pci 0000:00:14.5: reg 10: [mem 0xfe9fb000-0xfe9fbfff] [ 0.271063] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.271193] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.271254] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.271322] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.271412] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.271526] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600 [ 0.271644] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600 [ 0.271707] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600 [ 0.271806] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600 [ 0.271900] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600 [ 0.272016] pci 0000:03:00.0: [8086:10d3] type 0 class 0x000200 [ 0.272016] pci 0000:03:00.0: reg 10: [mem 0xfebe0000-0xfebfffff] [ 0.272016] pci 0000:03:00.0: reg 18: [io 0xe800-0xe81f] [ 0.272016] pci 0000:03:00.0: reg 1c: [mem 0xfebdc000-0xfebdffff] [ 0.272031] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.272042] pci 0000:03:00.0: PME# disabled [ 0.280056] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 0.280069] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.280079] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.280203] pci 0000:02:00.0: [8086:10d3] type 0 class 0x000200 [ 0.280237] pci 0000:02:00.0: reg 10: [mem 0xfeae0000-0xfeafffff] [ 0.280282] pci 0000:02:00.0: reg 18: [io 0xd800-0xd81f] [ 0.280307] pci 0000:02:00.0: reg 1c: [mem 0xfeadc000-0xfeadffff] [ 0.280487] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.280499] pci 0000:02:00.0: PME# disabled [ 0.288054] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.288068] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.288077] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.288143] pci 0000:01:04.0: [102b:0532] type 0 class 0x000300 [ 0.288182] pci 0000:01:04.0: reg 10: [mem 0xfc000000-0xfcffffff pref] [ 0.288205] pci 0000:01:04.0: reg 14: [mem 0xfdffc000-0xfdffffff] [ 0.288228] pci 0000:01:04.0: reg 18: [mem 0xfe000000-0xfe7fffff] [ 0.288436] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) [ 0.288451] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.288461] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.288467] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.288473] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.288480] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.288487] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.288493] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.288541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.288954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC09._PRT] [ 0.289027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] [ 0.289138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.289344] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.289352] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.289358] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.307234] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.307382] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.307517] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.307650] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 *14 15) [ 0.307782] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 *15) [ 0.307924] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.308030] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15) [ 0.308163] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.308239] xen/balloon: Initialising balloon driver. [ 0.351878] xen-balloon: Initialising balloon driver. [ 0.351910] xen/balloon: Xen selfballooning driver disabled for domain0. [ 0.352081] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none [ 0.352089] vgaarb: loaded [ 0.352092] vgaarb: bridge control possible 0000:01:04.0 [ 0.352233] i2c-core: driver [aat2870] using legacy suspend method [ 0.352239] i2c-core: driver [aat2870] using legacy resume method [ 0.352360] SCSI subsystem initialized [ 0.352432] libata version 3.00 loaded. [ 0.352432] usbcore: registered new interface driver usbfs [ 0.352432] usbcore: registered new interface driver hub [ 0.352432] usbcore: registered new device driver usb [ 0.352432] PCI: Using ACPI for IRQ routing [ 0.356021] PCI: pci_cache_line_size set to 64 bytes [ 0.356021] reserve RAM buffer: 0000000000096000 - 000000000009ffff [ 0.356021] reserve RAM buffer: 00000000dfe90000 - 00000000dfffffff [ 0.356021] reserve RAM buffer: 00000002e0170000 - 00000002e3ffffff [ 0.356114] NetLabel: Initializing [ 0.356119] NetLabel: domain hash size = 128 [ 0.356123] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.356140] NetLabel: unlabeled traffic allowed by default [ 0.356221] Switching to clocksource xen [ 0.365468] AppArmor: AppArmor Filesystem Enabled [ 0.365506] pnp: PnP ACPI init [ 0.365528] ACPI: bus type pnp registered [ 0.365887] pnp 00:00: [bus 00-ff] [ 0.365893] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.365898] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.365903] pnp 00:00: [io 0x0d00-0xffff window] [ 0.365908] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.365913] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.365919] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled] [ 0.365924] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.366046] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.366320] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.366327] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.366410] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.366622] pnp 00:02: [mem 0xf6000000-0xf6003fff] [ 0.366683] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.366690] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.367338] pnp 00:03: [dma 4] [ 0.367343] pnp 00:03: [io 0x0000-0x000f] [ 0.367347] pnp 00:03: [io 0x0081-0x0083] [ 0.367352] pnp 00:03: [io 0x0087] [ 0.367356] pnp 00:03: [io 0x0089-0x008b] [ 0.367361] pnp 00:03: [io 0x008f] [ 0.367365] pnp 00:03: [io 0x00c0-0x00df] [ 0.367422] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.367449] pnp 00:04: [io 0x0070-0x0071] [ 0.367457] xen: registering gsi 8 triggering 1 polarity 0 [ 0.367466] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.367471] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.367490] pnp 00:04: [irq 8] [ 0.367547] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.367616] pnp 00:05: [io 0x0060] [ 0.367621] pnp 00:05: [io 0x0064] [ 0.367625] xen: registering gsi 1 triggering 1 polarity 0 [ 0.367631] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 0.367636] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.367652] pnp 00:05: [irq 1] [ 0.367708] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.367822] xen: registering gsi 12 triggering 1 polarity 0 [ 0.367829] xen_map_pirq_gsi: returning irq 12 for gsi 12 [ 0.367833] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.367847] pnp 00:06: [irq 12] [ 0.367907] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.367928] pnp 00:07: [io 0x0061] [ 0.368018] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.368039] pnp 00:08: [io 0x00f0-0x00ff] [ 0.368044] xen: registering gsi 13 triggering 1 polarity 0 [ 0.368051] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.368056] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.368081] pnp 00:08: [irq 13] [ 0.368137] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.368338] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 0.368344] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 0.368350] pnp 00:09: [io 0x0a10-0x0a1f] [ 0.368433] system 00:09: [io 0x0a10-0x0a1f] has been reserved [ 0.368440] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.368533] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 0.368595] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.368897] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.368902] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.368985] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.368992] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.368999] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.369529] pnp 00:0c: [io 0x0010-0x001f] [ 0.369534] pnp 00:0c: [io 0x0022-0x003f] [ 0.369539] pnp 00:0c: [io 0x0062-0x0063] [ 0.369543] pnp 00:0c: [io 0x0065-0x006f] [ 0.369548] pnp 00:0c: [io 0x0072-0x007f] [ 0.369552] pnp 00:0c: [io 0x0080] [ 0.369556] pnp 00:0c: [io 0x0084-0x0086] [ 0.369561] pnp 00:0c: [io 0x0088] [ 0.369565] pnp 00:0c: [io 0x008c-0x008e] [ 0.369569] pnp 00:0c: [io 0x0090-0x009f] [ 0.369574] pnp 00:0c: [io 0x00a2-0x00bf] [ 0.369578] pnp 00:0c: [io 0x00b1] [ 0.369582] pnp 00:0c: [io 0x00e0-0x00ef] [ 0.369587] pnp 00:0c: [io 0x0ca2-0x0ca3] [ 0.369591] pnp 00:0c: [io 0x0550-0x0551] [ 0.369596] pnp 00:0c: [io 0x04d0-0x04d1] [ 0.369600] pnp 00:0c: [io 0x040b] [ 0.369604] pnp 00:0c: [io 0x04d6] [ 0.369608] pnp 00:0c: [io 0x0c00-0x0c01] [ 0.369613] pnp 00:0c: [io 0x0c14] [ 0.369617] pnp 00:0c: [io 0x0c50-0x0c51] [ 0.369621] pnp 00:0c: [io 0x0c52] [ 0.369626] pnp 00:0c: [io 0x0c6c] [ 0.369630] pnp 00:0c: [io 0x0c6f] [ 0.369634] pnp 00:0c: [io 0x0cd0-0x0cd1] [ 0.369638] pnp 00:0c: [io 0x0cd2-0x0cd3] [ 0.369643] pnp 00:0c: [io 0x0cd4-0x0cd5] [ 0.369647] pnp 00:0c: [io 0x0cd6-0x0cd7] [ 0.369652] pnp 00:0c: [io 0x0cd8-0x0cdf] [ 0.369656] pnp 00:0c: [io 0x0800-0x089f] [ 0.369661] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] [ 0.369666] pnp 00:0c: [io 0x0b00-0x0b0f] [ 0.369670] pnp 00:0c: [io 0x0b20-0x0b3f] [ 0.369675] pnp 00:0c: [io 0x0900-0x090f] [ 0.369679] pnp 00:0c: [io 0x0910-0x091f] [ 0.369684] pnp 00:0c: [io 0xfe00-0xfefe] [ 0.369688] pnp 00:0c: [io 0x0060-0x005f disabled] [ 0.369693] pnp 00:0c: [io 0x0064-0x0063 disabled] [ 0.369698] pnp 00:0c: [mem 0xffb80000-0xffbfffff] [ 0.369706] pnp 00:0c: [mem 0xfec10000-0xfec1001f] [ 0.369818] system 00:0c: [io 0x0ca2-0x0ca3] has been reserved [ 0.369824] system 00:0c: [io 0x0550-0x0551] has been reserved [ 0.369830] system 00:0c: [io 0x04d0-0x04d1] has been reserved [ 0.369836] system 00:0c: [io 0x040b] has been reserved [ 0.369842] system 00:0c: [io 0x04d6] has been reserved [ 0.369847] system 00:0c: [io 0x0c00-0x0c01] has been reserved [ 0.369853] system 00:0c: [io 0x0c14] has been reserved [ 0.369858] system 00:0c: [io 0x0c50-0x0c51] has been reserved [ 0.369864] system 00:0c: [io 0x0c52] has been reserved [ 0.369870] system 00:0c: [io 0x0c6c] has been reserved [ 0.369875] system 00:0c: [io 0x0c6f] has been reserved [ 0.369881] system 00:0c: [io 0x0cd0-0x0cd1] has been reserved [ 0.369887] system 00:0c: [io 0x0cd2-0x0cd3] has been reserved [ 0.369893] system 00:0c: [io 0x0cd4-0x0cd5] has been reserved [ 0.369898] system 00:0c: [io 0x0cd6-0x0cd7] has been reserved [ 0.369904] system 00:0c: [io 0x0cd8-0x0cdf] has been reserved [ 0.369913] system 00:0c: [io 0x0800-0x089f] has been reserved [ 0.369919] system 00:0c: [io 0x0b00-0x0b0f] has been reserved [ 0.369925] system 00:0c: [io 0x0b20-0x0b3f] has been reserved [ 0.369931] system 00:0c: [io 0x0900-0x090f] has been reserved [ 0.369937] system 00:0c: [io 0x0910-0x091f] has been reserved [ 0.369943] system 00:0c: [io 0xfe00-0xfefe] has been reserved [ 0.369950] system 00:0c: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.369956] system 00:0c: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.369963] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.370520] pnp 00:0d: [io 0x03f8-0x03ff] [ 0.370526] xen: registering gsi 4 triggering 1 polarity 0 [ 0.370531] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 0.370536] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.370552] pnp 00:0d: [irq 4] [ 0.370557] pnp 00:0d: [dma 0 disabled] [ 0.370681] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.371255] pnp 00:0e: [io 0x02f8-0x02ff] [ 0.371260] xen: registering gsi 3 triggering 1 polarity 0 [ 0.371266] xen_map_pirq_gsi: returning irq 3 for gsi 3 [ 0.371270] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.371275] Already setup the GSI :3 [ 0.371279] pnp 00:0e: [irq 3] [ 0.371284] pnp 00:0e: [dma 0 disabled] [ 0.371404] pnp 00:0e: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.371547] pnp 00:0f: [mem 0xe0000000-0xefffffff] [ 0.371630] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved [ 0.371637] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.372610] pnp 00:10: [mem 0x00000000-0x0009ffff] [ 0.372615] pnp 00:10: [mem 0x000c0000-0x000cffff] [ 0.372620] pnp 00:10: [mem 0x000e0000-0x000fffff] [ 0.372625] pnp 00:10: [mem 0x00100000-0xdfffffff] [ 0.372635] pnp 00:10: [mem 0xfec00000-0xffffffff] [ 0.372734] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.372741] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.372747] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.372753] system 00:10: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.372760] system 00:10: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.372767] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.373080] pnp: PnP ACPI: found 17 devices [ 0.373085] ACPI: ACPI bus type pnp unregistered [ 0.380388] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.380414] PCI: max bus depth: 1 pci_try_num: 2 [ 0.380485] pci 0000:00:09.0: PCI bridge to [bus 03-03] [ 0.380492] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.380502] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.380516] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.380523] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.380533] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.380547] pci 0000:00:14.4: PCI bridge to [bus 01-01] [ 0.380558] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.380568] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.380592] xen: registering gsi 17 triggering 0 polarity 1 [ 0.380611] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.380626] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.380636] pci 0000:00:09.0: setting latency timer to 64 [ 0.380648] xen: registering gsi 18 triggering 0 polarity 1 [ 0.380658] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.380670] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.380679] pci 0000:00:0a.0: setting latency timer to 64 [ 0.380695] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.380700] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.380706] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.380711] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.380717] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] [ 0.380723] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.380728] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.380734] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.380740] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.380746] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.380752] pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.380759] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.380764] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.380770] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.380776] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.380782] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff] [ 0.380840] NET: Registered protocol family 2 [ 0.382874] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.388164] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.391394] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.391772] TCP: Hash tables configured (established 524288 bind 65536) [ 0.391779] TCP reno registered [ 0.391903] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.392172] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.392420] NET: Registered protocol family 1 [ 0.392475] xen: registering gsi 16 triggering 0 polarity 1 [ 0.392498] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.392519] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.120175] pci 0000:00:12.0: PCI INT A disabled [ 1.120207] xen: registering gsi 16 triggering 0 polarity 1 [ 1.120221] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 1.120227] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.120232] Already setup the GSI :16 [ 1.120238] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.204177] pci 0000:00:12.1: PCI INT A disabled [ 1.204211] xen: registering gsi 17 triggering 0 polarity 1 [ 1.204224] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 1.204230] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.204235] Already setup the GSI :17 [ 1.204241] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.204378] pci 0000:00:12.2: PCI INT B disabled [ 1.204393] xen: registering gsi 18 triggering 0 polarity 1 [ 1.204399] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 1.204404] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.204408] Already setup the GSI :18 [ 1.204413] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.288202] pci 0000:00:13.0: PCI INT A disabled [ 1.288233] xen: registering gsi 18 triggering 0 polarity 1 [ 1.288246] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 1.288251] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.288256] Already setup the GSI :18 [ 1.288262] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.372182] pci 0000:00:13.1: PCI INT A disabled [ 1.372216] xen: registering gsi 19 triggering 0 polarity 1 [ 1.372243] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.372262] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.372397] pci 0000:00:13.2: PCI INT B disabled [ 1.372424] xen: registering gsi 18 triggering 0 polarity 1 [ 1.372430] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 1.372434] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.372439] Already setup the GSI :18 [ 1.372444] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.456175] pci 0000:00:14.5: PCI INT C disabled [ 1.456261] pci 0000:01:04.0: Boot video device [ 1.456269] PCI: CLS 64 bytes, default 64 [ 1.457352] audit: initializing netlink socket (disabled) [ 1.457372] type=2000 audit(1335969953.923:1): initialized [ 1.485603] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.487841] VFS: Disk quotas dquot_6.5.2 [ 1.487923] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.488634] fuse init (API version 7.17) [ 1.488808] msgmni has been set to 1479 [ 1.489519] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.489578] io scheduler noop registered [ 1.489583] io scheduler deadline registered [ 1.489627] io scheduler cfq registered (default) [ 1.490108] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.490142] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.490330] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.490341] ACPI: Power Button [PWRB] [ 1.490401] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.490409] ACPI: Power Button [PWRF] [ 1.716979] APEI: Can not request iomem region <00000000dfec60ea-00000000dfec60ec> for GARs. [ 1.717094] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 1.717274] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.717857] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.721834] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.746263] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.852428] hpet_acpi_add: no address or irqs in _CRS [ 1.852449] Linux agpgart interface v0.103 [ 1.856352] brd: module loaded [ 1.857407] loop: module loaded [ 1.857802] ahci 0000:00:11.0: version 3.0 [ 1.857824] xen: registering gsi 22 triggering 0 polarity 1 [ 1.857845] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.857864] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.858086] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.858095] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.859054] scsi0 : ahci [ 1.859169] scsi1 : ahci [ 1.859262] scsi2 : ahci [ 1.859362] scsi3 : ahci [ 1.859468] scsi4 : ahci [ 1.859560] scsi5 : ahci [ 1.860509] ata1: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa500 irq 22 [ 1.860517] ata2: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa580 irq 22 [ 1.860525] ata3: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa600 irq 22 [ 1.860532] ata4: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa680 irq 22 [ 1.860539] ata5: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa700 irq 22 [ 1.860546] ata6: SATA max UDMA/133 abar m1024@0xfe9fa400 port 0xfe9fa780 irq 22 [ 1.861047] Fixed MDIO Bus: probed [ 1.861071] tun: Universal TUN/TAP device driver, 1.6 [ 1.861076] tun: (C) 1999-2004 Max Krasnyansky [ 1.861162] PPP generic driver version 2.4.2 [ 1.861314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.861402] xen: registering gsi 17 triggering 0 polarity 1 [ 1.861411] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 1.861416] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.861420] Already setup the GSI :17 [ 1.861426] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.861460] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.861523] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.861540] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.861636] ehci_hcd 0000:00:12.2: debug port 1 [ 1.861720] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9fa800 [ 1.872106] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.872298] hub 1-0:1.0: USB hub found [ 1.872307] hub 1-0:1.0: 6 ports detected [ 1.872556] xen: registering gsi 19 triggering 0 polarity 1 [ 1.872564] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 1.872569] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.872574] Already setup the GSI :19 [ 1.872579] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.872614] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.872700] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.872716] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.872808] ehci_hcd 0000:00:13.2: debug port 1 [ 1.872857] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fac00 [ 1.884099] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.884311] hub 2-0:1.0: USB hub found [ 1.884319] hub 2-0:1.0: 6 ports detected [ 1.884438] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.884590] xen: registering gsi 16 triggering 0 polarity 1 [ 1.884598] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 1.884603] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.884608] Already setup the GSI :16 [ 1.884613] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.884648] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.884743] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.884809] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9f6000 [ 1.944281] hub 3-0:1.0: USB hub found [ 1.944296] hub 3-0:1.0: 3 ports detected [ 1.944511] xen: registering gsi 16 triggering 0 polarity 1 [ 1.944519] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 1.944524] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.944528] Already setup the GSI :16 [ 1.944534] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.944569] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.944667] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.944707] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9f7000 [ 2.004294] hub 4-0:1.0: USB hub found [ 2.004308] hub 4-0:1.0: 3 ports detected [ 2.004528] xen: registering gsi 18 triggering 0 polarity 1 [ 2.004535] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.004540] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.004545] Already setup the GSI :18 [ 2.004550] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.004585] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.004671] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.004738] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9f8000 [ 2.064268] hub 5-0:1.0: USB hub found [ 2.064282] hub 5-0:1.0: 3 ports detected [ 2.064494] xen: registering gsi 18 triggering 0 polarity 1 [ 2.064502] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.064506] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.064511] Already setup the GSI :18 [ 2.064516] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.064551] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.064620] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.064659] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9f9000 [ 2.124279] hub 6-0:1.0: USB hub found [ 2.124293] hub 6-0:1.0: 3 ports detected [ 2.124502] xen: registering gsi 18 triggering 0 polarity 1 [ 2.124509] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.124514] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.124519] Already setup the GSI :18 [ 2.124524] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.124559] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.124626] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.124666] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fb000 [ 2.184191] ata5: SATA link down (SStatus 0 SControl 300) [ 2.184261] hub 7-0:1.0: USB hub found [ 2.184272] hub 7-0:1.0: 2 ports detected [ 2.184358] uhci_hcd: USB Universal Host Controller Interface driver [ 2.184440] usbcore: registered new interface driver libusual [ 2.184498] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.187405] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.187418] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.187601] mousedev: PS/2 mouse device common for all mice [ 2.187775] rtc_cmos 00:04: RTC can wake from S4 [ 2.187934] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.187989] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 2.188106] device-mapper: uevent: version 1.0.3 [ 2.188194] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 2.188207] EFI Variables Facility v0.08 2004-May-17 [ 2.188532] TCP cubic registered [ 2.188663] NET: Registered protocol family 10 [ 2.189387] NET: Registered protocol family 17 [ 2.189411] Registering the dns_resolver key type [ 2.189546] PM: Hibernation image not present or could not be loaded. [ 2.189563] registered taskstats version 1 [ 2.196092] usb 2-2: new high-speed USB device number 2 using ehci_hcd [ 2.207113] Magic number: 12:861:787 [ 2.207307] rtc_cmos 00:04: setting system clock to 2012-05-02 14:45:54 UTC (1335969954) [ 2.207436] powernow-k8: Found 1 AMD Opteron(tm) Processor 6128 (8 cpu cores) (version 2.20.00) [ 2.207544] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.207549] EDD information not available. [ 2.220637] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.334785] Initializing USB Mass Storage driver... [ 2.335007] scsi6 : usb-storage 2-2:1.0 [ 2.335086] usbcore: registered new interface driver usb-storage [ 2.335092] USB Mass Storage support registered. [ 2.360141] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.360175] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.360201] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.360225] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.360250] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.360796] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223L, SB03, max UDMA/100 [ 2.361200] ata4.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133 [ 2.361208] ata4.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.361277] ata2.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133 [ 2.361285] ata2.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.361334] ata3.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133 [ 2.361340] ata3.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.361354] ata1.00: ATA-8: WDC WD2502ABYS-02B7A0, 02.03B03, max UDMA/133 [ 2.361360] ata1.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.361505] ata6.00: configured for UDMA/100 [ 2.362391] ata4.00: configured for UDMA/133 [ 2.362421] ata2.00: configured for UDMA/133 [ 2.362599] ata1.00: configured for UDMA/133 [ 2.362749] scsi 0:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.362951] sd 0:0:0:0: [sda] 490350672 512-byte logical blocks: (251 GB/233 GiB) [ 2.363055] sd 0:0:0:0: [sda] Write Protect is off [ 2.363061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.363118] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.363162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.363312] ata3.00: configured for UDMA/133 [ 2.363439] scsi 1:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.363609] sd 1:0:0:0: [sdb] 490350672 512-byte logical blocks: (251 GB/233 GiB) [ 2.363669] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.363762] sd 1:0:0:0: [sdb] Write Protect is off [ 2.363769] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.363808] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.363950] scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.364143] sd 2:0:0:0: [sdc] 490350672 512-byte logical blocks: (251 GB/233 GiB) [ 2.364168] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.364238] sd 2:0:0:0: [sdc] Write Protect is off [ 2.364245] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.364291] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.364333] scsi 3:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.364513] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.364564] sd 3:0:0:0: [sdd] 490350672 512-byte logical blocks: (251 GB/233 GiB) [ 2.364735] sd 3:0:0:0: [sdd] Write Protect is off [ 2.364741] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.364780] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.365239] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB03 PQ: 0 ANSI: 5 [ 2.368276] sdb: sdb1 sdb2 [ 2.368691] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.368760] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.368768] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.368876] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 2.368945] sr 5:0:0:0: Attached scsi generic sg4 type 5 [ 2.376384] sdd: unknown partition table [ 2.376666] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.379373] sdc: unknown partition table [ 2.379649] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.483103] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 > [ 2.484090] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.484841] Freeing unused kernel memory: 920k freed [ 2.485162] Write protecting the kernel read-only data: 12288k [ 2.492276] Freeing unused kernel memory: 1520k freed [ 2.493426] Freeing unused kernel memory: 1140k freed [ 2.559332] udevd[165]: starting version 175 [ 2.620594] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 2.620604] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 2.623802] e1000e 0000:03:00.0: Disabling ASPM L0s [ 2.623832] xen: registering gsi 17 triggering 0 polarity 1 [ 2.623845] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 2.623850] xen: --> pirq=17 -> irq=17 (gsi=17) [ 2.623856] Already setup the GSI :17 [ 2.623862] e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.623894] e1000e 0000:03:00.0: setting latency timer to 64 [ 2.704179] usb 5-3: new full-speed USB device number 2 using ohci_hcd [ 2.737702] e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:29:de:05 [ 2.737713] e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.737798] e1000e 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.738025] e1000e 0000:02:00.0: Disabling ASPM L0s [ 2.738052] xen: registering gsi 18 triggering 0 polarity 1 [ 2.738096] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.738102] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.738107] Already setup the GSI :18 [ 2.738113] e1000e 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.738145] e1000e 0000:02:00.0: setting latency timer to 64 [ 2.853363] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:29:de:04 [ 2.853372] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 2.853456] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.882463] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input3 [ 2.882615] generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input0 [ 2.886373] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input4 [ 2.886517] generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.0-3/input1 [ 2.886542] usbcore: registered new interface driver usbhid [ 2.886547] usbhid: USB HID core driver [ 3.333153] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 3.333827] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 3.334481] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 3.335199] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 [ 3.336131] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 3.336366] sd 6:0:0:1: Attached scsi generic sg6 type 0 [ 3.336599] sd 6:0:0:2: Attached scsi generic sg7 type 0 [ 3.336822] sd 6:0:0:3: Attached scsi generic sg8 type 0 [ 3.342133] sd 6:0:0:0: [sde] Attached SCSI removable disk [ 3.346546] sd 6:0:0:1: [sdf] Attached SCSI removable disk [ 3.347264] sd 6:0:0:3: [sdh] Attached SCSI removable disk [ 3.348092] sd 6:0:0:2: [sdg] Attached SCSI removable disk [ 8.966388] EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: (null) [ 15.562527] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.562539] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.593024] udevd[718]: starting version 175 [ 15.695773] Adding 32226300k swap on /dev/sda2. Priority:-1 extents:1 across:32226300k [ 15.717924] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 15.718899] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 15.719044] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 15.723681] lp: driver loaded but no devices found [ 15.734573] ipmi message handler version 39.2 [ 15.735953] ipmi device interface [ 15.739772] Bridge firewalling registered [ 15.741834] IPMI System Interface driver. [ 15.741948] ipmi_si: probing via SMBIOS [ 15.741953] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 15.741960] ipmi_si: Adding SMBIOS-specified kcs state machine [ 15.741973] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 15.751212] device-mapper: multipath: version 1.3.0 loaded [ 15.756221] device eth0 entered promiscuous mode [ 15.784153] type=1400 audit(1335969968.074:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=842 comm="apparmor_parser" [ 15.784732] type=1400 audit(1335969968.074:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser" [ 15.785117] type=1400 audit(1335969968.074:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser" [ 15.802699] MCE: In-kernel MCE decoding enabled. [ 15.804165] EDAC MC: Ver: 2.1.0 [ 15.807771] AMD64 EDAC driver v3.4.0 [ 15.808823] EDAC amd64: DRAM ECC enabled. [ 15.808852] EDAC amd64: F10h detected (node 0). [ 15.808916] EDAC MC: DCT0 chip selects: [ 15.808920] EDAC amd64: MC: 0: 2048MB 1: 2048MB [ 15.808924] EDAC amd64: MC: 2: 2048MB 3: 2048MB [ 15.808927] EDAC amd64: MC: 4: 0MB 5: 0MB [ 15.808930] EDAC amd64: MC: 6: 0MB 7: 0MB [ 15.808933] EDAC MC: DCT1 chip selects: [ 15.808939] EDAC amd64: MC: 0: 2048MB 1: 2048MB [ 15.808942] EDAC amd64: MC: 2: 2048MB 3: 2048MB [ 15.808948] EDAC amd64: MC: 4: 0MB 5: 0MB [ 15.808951] EDAC amd64: MC: 6: 0MB 7: 0MB [ 15.808954] EDAC amd64: using x8 syndromes. [ 15.808960] EDAC amd64: MCT channel count: 2 [ 15.809009] EDAC amd64: CS0: Unbuffered DDR3 RAM [ 15.809012] EDAC amd64: CS1: Unbuffered DDR3 RAM [ 15.809015] EDAC amd64: CS2: Unbuffered DDR3 RAM [ 15.809018] EDAC amd64: CS3: Unbuffered DDR3 RAM [ 15.809112] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2 [ 15.809275] EDAC amd64: DRAM ECC enabled. [ 15.809280] EDAC amd64: F10h detected (node 1). [ 15.809345] EDAC MC: DCT0 chip selects: [ 15.809349] EDAC amd64: MC: 0: 2048MB 1: 2048MB [ 15.809352] EDAC amd64: MC: 2: 2048MB 3: 2048MB [ 15.809355] EDAC amd64: MC: 4: 0MB 5: 0MB [ 15.809358] EDAC amd64: MC: 6: 0MB 7: 0MB [ 15.809360] EDAC MC: DCT1 chip selects: [ 15.809363] EDAC amd64: MC: 0: 2048MB 1: 2048MB [ 15.809366] EDAC amd64: MC: 2: 2048MB 3: 2048MB [ 15.809369] EDAC amd64: MC: 4: 0MB 5: 0MB [ 15.809372] EDAC amd64: MC: 6: 0MB 7: 0MB [ 15.809375] EDAC amd64: using x8 syndromes. [ 15.809377] EDAC amd64: MCT channel count: 2 [ 15.809404] EDAC amd64: CS0: Unbuffered DDR3 RAM [ 15.809407] EDAC amd64: CS1: Unbuffered DDR3 RAM [ 15.809413] EDAC amd64: CS2: Unbuffered DDR3 RAM [ 15.809416] EDAC amd64: CS3: Unbuffered DDR3 RAM [ 15.809583] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2 [ 15.809909] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 15.842927] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.855258] ADDRCONF(NETDEV_UP): br0: link is not ready [ 15.856181] ipmi_si: Invalid return from get global enables command, cannot enable the event buffer. [ 15.898626] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x00b980, prod_id: 0xa711, dev_id: 0x20) [ 15.899311] ipmi_si ipmi_si.0: IPMI kcs interface initialized [ 16.032526] EXT4-fs (sda15): re-mounted. Opts: errors=remount-ro [ 16.123208] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.868146] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 17.205624] EXT4-fs (dm-33): mounted filesystem with ordered data mode. Opts: (null) [ 19.069087] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 19.071434] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.071572] br0: port 1(eth0) entering forwarding state [ 19.071587] br0: port 1(eth0) entering forwarding state [ 19.073722] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 19.861816] init: udev-fallback-graphics main process (1853) terminated with status 1 [ 19.990334] init: failsafe main process (1730) killed by TERM signal [ 20.102020] type=1400 audit(1335969972.390:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1942 comm="apparmor_parser" [ 20.102328] type=1400 audit(1335969972.390:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1940 comm="apparmor_parser" [ 20.102359] type=1400 audit(1335969972.390:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1943 comm="apparmor_parser" [ 20.102975] type=1400 audit(1335969972.390:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1940 comm="apparmor_parser" [ 20.103332] type=1400 audit(1335969972.390:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1940 comm="apparmor_parser" [ 20.103432] type=1400 audit(1335969972.390:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1944 comm="apparmor_parser" [ 20.103792] type=1400 audit(1335969972.390:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1944 comm="apparmor_parser" [ 20.392238] init: Failed to spawn alsa-restore main process: unable to execute: No such file or directory [ 20.626333] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.728136] nf_conntrack version 0.5.0 (5946 buckets, 23784 max) [ 20.779431] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 21.005464] Event-channel device installed. [ 21.069011] XENBUS: Unable to read cpu state [ 21.069219] XENBUS: Unable to read cpu state [ 21.069422] XENBUS: Unable to read cpu state [ 21.069607] XENBUS: Unable to read cpu state [ 21.069825] XENBUS: Unable to read cpu state [ 21.069962] XENBUS: Unable to read cpu state [ 21.070115] XENBUS: Unable to read cpu state [ 21.070284] XENBUS: Unable to read cpu state [ 21.940360] Ebtables v2.0 registered [ 21.974059] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 29.888084] br0: no IPv6 routers present [ 230.463540] xen-acpi-processor: Max ACPI ID: 16 [ 230.465802] ACPI CPU1 - P-states uploaded. [ 230.465812] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.465816] P1: 1500 MHz, 8265 mW, 4 uS [ 230.465819] P2: 1200 MHz, 6825 mW, 4 uS [ 230.465822] P3: 1000 MHz, 5600 mW, 4 uS [ 230.465825] P4: 800 MHz, 4777 mW, 4 uS [ 230.465839] ACPI CPU2 - P-states uploaded. [ 230.465843] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.465846] P1: 1500 MHz, 8265 mW, 4 uS [ 230.465850] P2: 1200 MHz, 6825 mW, 4 uS [ 230.465853] P3: 1000 MHz, 5600 mW, 4 uS [ 230.465856] P4: 800 MHz, 4777 mW, 4 uS [ 230.465871] ACPI CPU3 - P-states uploaded. [ 230.465876] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.465881] P1: 1500 MHz, 8265 mW, 4 uS [ 230.465886] P2: 1200 MHz, 6825 mW, 4 uS [ 230.465892] P3: 1000 MHz, 5600 mW, 4 uS [ 230.465897] P4: 800 MHz, 4777 mW, 4 uS [ 230.465911] ACPI CPU4 - P-states uploaded. [ 230.465921] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.465927] P1: 1500 MHz, 8265 mW, 4 uS [ 230.465932] P2: 1200 MHz, 6825 mW, 4 uS [ 230.465937] P3: 1000 MHz, 5600 mW, 4 uS [ 230.465942] P4: 800 MHz, 4777 mW, 4 uS [ 230.465963] ACPI CPU5 - P-states uploaded. [ 230.465968] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.465978] P1: 1500 MHz, 8265 mW, 4 uS [ 230.465983] P2: 1200 MHz, 6825 mW, 4 uS [ 230.465988] P3: 1000 MHz, 5600 mW, 4 uS [ 230.465993] P4: 800 MHz, 4777 mW, 4 uS [ 230.466006] ACPI CPU6 - P-states uploaded. [ 230.466013] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.466018] P1: 1500 MHz, 8265 mW, 4 uS [ 230.466023] P2: 1200 MHz, 6825 mW, 4 uS [ 230.466028] P3: 1000 MHz, 5600 mW, 4 uS [ 230.466032] P4: 800 MHz, 4777 mW, 4 uS [ 230.466045] ACPI CPU7 - P-states uploaded. [ 230.466051] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.466056] P1: 1500 MHz, 8265 mW, 4 uS [ 230.466060] P2: 1200 MHz, 6825 mW, 4 uS [ 230.466065] P3: 1000 MHz, 5600 mW, 4 uS [ 230.466073] P4: 800 MHz, 4777 mW, 4 uS [ 230.466083] ACPI CPU8 - P-states uploaded. [ 230.466088] *P0: 2000 MHz, 10580 mW, 4 uS [ 230.466093] P1: 1500 MHz, 8265 mW, 4 uS [ 230.466098] P2: 1200 MHz, 6825 mW, 4 uS [ 230.466103] P3: 1000 MHz, 5600 mW, 4 uS [ 230.466108] P4: 800 MHz, 4777 mW, 4 uS [ 230.466134] xen-acpi-processor: ACPI CPU1 w/ PBLK:0x810 [ 230.466150] xen-acpi-processor: ACPI CPU2 w/ PBLK:0x0 [ 230.466161] xen-acpi-processor: ACPI CPU3 w/ PBLK:0x0 [ 230.466172] xen-acpi-processor: ACPI CPU4 w/ PBLK:0x0 [ 230.466182] xen-acpi-processor: ACPI CPU5 w/ PBLK:0x0 [ 230.466193] xen-acpi-processor: ACPI CPU6 w/ PBLK:0x0 [ 230.466203] xen-acpi-processor: ACPI CPU7 w/ PBLK:0x0 [ 230.466213] xen-acpi-processor: ACPI CPU8 w/ PBLK:0x0 [ 230.466227] xen-acpi-processor: ACPI CPU9 w/ PBLK:0x0 [ 230.466237] xen-acpi-processor: ACPI CPU10 w/ PBLK:0x0 [ 230.466247] xen-acpi-processor: ACPI CPU11 w/ PBLK:0x0 [ 230.466258] xen-acpi-processor: ACPI CPU12 w/ PBLK:0x0