[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-5.fc16.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.1 20111003 (Red Hat 4.6.1-10) (GCC) ) #1 SMP Thu Oct 27 03:46:50 UTC 2011 [ 0.000000] Command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved) [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] DMI 2.4 present. [ 0.000000] Hypervisor detected: Xen HVM [ 0.000000] Xen version 4.1. [ 0.000000] Xen Platform PCI: unrecognised magic value [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000fbc70] fbc70 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] RAMDISK: 37e7a000 - 3ffdf000 [ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen) [ 0.000000] ACPI: XSDT 00000000fc0134b0 00034 (v01 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: FACP 00000000fc0132d0 000F4 (v04 Xen HVM 00000000 HVML 00000000) [ 0.000000] ACPI: DSDT 00000000fc003440 0FE05 (v02 Xen HVM 00000000 INTL 20100528) [ 0.000000] ACPI: FACS 00000000fc003400 00040 [ 0.000000] ACPI: APIC 00000000fc0133d0 000D8 (v02 Xen HVM 00000000 HVML 00000000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000040000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000040000000 [ 0.000000] NODE_DATA [000000003ffec000 - 000000003fffffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 15 CPUs, 14 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bc000000) [ 0.000000] Booting paravirtualized kernel on Xen HVM [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880037c00000 s81024 r8192 d21376 u131072 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257929 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 883240k/1048576k available (4867k kernel code, 456k absent, 164880k reserved, 6782k data, 940k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1208 16 [ 0.000000] Xen HVM callback vector for event delivery is enabled [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 8388608 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Detected 2677.276 MHz processor. [ 0.004999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5354.55 BogoMIPS (lpj=2677276) [ 0.014003] pid_max: default: 32768 minimum: 301 [ 0.019036] Security Framework initialized [ 0.023010] SELinux: Initializing. [ 0.027198] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.034258] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.040108] Mount-cache hash table entries: 256 [ 0.045162] Initializing cgroup subsys cpuacct [ 0.049006] Initializing cgroup subsys memory [ 0.058038] Initializing cgroup subsys devices [ 0.078003] Initializing cgroup subsys freezer [ 0.122002] Initializing cgroup subsys net_cls [ 0.131996] Initializing cgroup subsys blkio [ 0.141009] Initializing cgroup subsys perf_event [ 0.153114] CPU: Physical Processor ID: 0 [ 0.161990] CPU: Processor Core ID: 0 [ 0.172992] mce: CPU supports 9 MCE banks [ 0.187024] SMP alternatives: switching to UP code [ 0.207887] ACPI: Core revision 20110623 [ 0.231609] ftrace: allocating 25204 entries in 99 pages [ 0.279972] Not enabling x2apic, Intr-remapping init failed. [ 0.297970] Switched APIC routing to physical flat. [ 0.311246] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.332335] CPU0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz stepping 05 [ 0.352990] installing Xen timer for CPU 0 [ 0.358056] Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only. [ 0.366988] NMI watchdog disabled (cpu0): hardware events not enabled [ 0.367999] Brought up 1 CPUs [ 0.368967] Total of 1 processors activated (5354.55 BogoMIPS). [ 0.374024] devtmpfs: initialized [ 0.412971] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.414011] RTC time: 17:45:37, date: 10/31/11 [ 0.415022] NET: Registered protocol family 16 [ 0.418010] ACPI: bus type pci registered [ 0.421960] PCI: Using configuration type 1 for base access [ 0.437115] bio: create slab at 0 [ 0.438093] ACPI: Added _OSI(Module Device) [ 0.438963] ACPI: Added _OSI(Processor Device) [ 0.439967] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.440974] ACPI: Added _OSI(Processor Aggregator Device) [ 0.519054] ACPI: Interpreter enabled [ 0.519951] ACPI: (supports S0 S3 S4 S5) [ 0.524951] ACPI: Using IOAPIC for interrupt routing [ 1.096959] ACPI: No dock devices found. [ 1.097861] HEST: Table not found. [ 1.098862] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.099943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.100988] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 1.101860] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 1.102862] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.103860] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] [ 1.144922] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, [ 1.144923] * this clock source is slow. Consider trying other clock sources [ 1.154850] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 1.185924] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 1.884892] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11) [ 1.890929] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.896927] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.902931] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11) [ 1.908856] xen/balloon: Initialising balloon driver. [ 1.909736] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 1.910751] xen-balloon: Initialising balloon driver. [ 1.911877] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.912734] vgaarb: loaded [ 1.913733] vgaarb: bridge control possible 0000:00:02.0 [ 1.914821] SCSI subsystem initialized [ 1.915855] usbcore: registered new interface driver usbfs [ 1.916752] usbcore: registered new interface driver hub [ 1.917762] usbcore: registered new device driver usb [ 1.918801] PCI: Using ACPI for IRQ routing [ 1.921776] NetLabel: Initializing [ 1.922732] NetLabel: domain hash size = 128 [ 1.923731] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.924747] NetLabel: unlabeled traffic allowed by default [ 1.925738] Switching to clocksource xen [ 1.927071] Switched to NOHz mode on CPU #0 [ 1.944150] pnp: PnP ACPI init [ 1.950692] ACPI: bus type pnp registered [ 1.968745] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.009903] system 00:02: [io 0x10c0-0x1141] has been reserved [ 2.020115] system 00:02: [io 0xb044-0xb047] has been reserved [ 2.032398] system 00:03: [io 0x08a0-0x08a3] has been reserved [ 2.046965] system 00:03: [io 0x0cc0-0x0ccf] has been reserved [ 2.060746] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 2.132279] pnp: PnP ACPI: found 12 devices [ 2.143196] ACPI: ACPI bus type pnp unregistered [ 2.168095] NET: Registered protocol family 2 [ 2.180174] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 2.199948] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 2.223886] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.240895] TCP: Hash tables configured (established 131072 bind 65536) [ 2.251707] TCP reno registered [ 2.257377] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2.271814] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2.292031] NET: Registered protocol family 1 [ 2.296744] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 2.307567] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 2.321092] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 2.337035] Unpacking initramfs... [ 2.994473] Freeing initrd memory: 132500k freed [ 3.031082] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 3.036743] audit: initializing netlink socket (disabled) [ 3.041250] type=2000 audit(1320083141.268:1): initialized [ 3.069999] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.081358] VFS: Disk quotas dquot_6.5.2 [ 3.085050] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.090701] msgmni has been set to 1983 [ 3.094445] alg: No test for stdrng (krng) [ 3.098010] NET: Registered protocol family 38 [ 3.107373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.123398] io scheduler noop registered [ 3.132300] io scheduler deadline registered [ 3.143504] io scheduler cfq registered (default) [ 3.154997] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.168358] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.186729] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 3.201997] acpiphp: Slot [0] registered [ 3.212613] acpiphp: Slot [1] registered [ 3.227042] acpiphp: Slot [2] registered [ 3.234824] acpiphp: Slot [3] registered [ 3.243333] acpiphp: Slot [4] registered [ 3.254169] acpiphp: Slot [5] registered [ 3.264412] acpiphp: Slot [6] registered [ 3.278546] acpiphp: Slot [7] registered [ 3.288234] acpiphp: Slot [8] registered [ 3.299249] acpiphp: Slot [9] registered [ 3.309300] acpiphp: Slot [10] registered [ 3.320623] acpiphp: Slot [11] registered [ 3.329553] acpiphp: Slot [12] registered [ 3.340383] acpiphp: Slot [13] registered [ 3.351436] acpiphp: Slot [14] registered [ 3.371532] acpiphp: Slot [15] registered [ 3.383484] acpiphp: Slot [16] registered [ 3.391217] acpiphp: Slot [17] registered [ 3.400109] acpiphp: Slot [18] registered [ 3.410752] acpiphp: Slot [19] registered [ 3.418563] acpiphp: Slot [20] registered [ 3.427333] acpiphp: Slot [21] registered [ 3.435531] acpiphp: Slot [22] registered [ 3.447844] acpiphp: Slot [23] registered [ 3.458886] acpiphp: Slot [24] registered [ 3.468774] acpiphp: Slot [25] registered [ 3.480989] acpiphp: Slot [26] registered [ 3.491224] acpiphp: Slot [27] registered [ 3.508879] acpiphp: Slot [28] registered [ 3.518513] acpiphp: Slot [29] registered [ 3.534696] acpiphp: Slot [30] registered [ 3.549822] acpiphp: Slot [31] registered [ 3.560227] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.574537] ACPI: Power Button [PWRF] [ 3.586151] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 [ 3.602954] ACPI: Sleep Button [SLPF] [ 3.676678] ERST: Table is not found! [ 3.683875] GHES: HEST is not enabled! [ 3.687897] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.750685] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.793768] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.805453] Non-volatile memory driver v1.3 [ 3.811376] Linux agpgart interface v0.103 [ 3.817834] loop: module loaded [ 3.827537] scsi0 : ata_piix [ 3.832212] scsi1 : ata_piix [ 3.836293] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 [ 3.856704] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 [ 3.872777] Fixed MDIO Bus: probed [ 3.884228] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.899724] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.917226] uhci_hcd: USB Universal Host Controller Interface driver [ 3.933624] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 3.949714] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 3.965097] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 3.988778] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c100 [ 4.009517] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.027023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.046997] usb usb1: Product: UHCI Host Controller [ 4.063419] usb usb1: Manufacturer: Linux 3.1.0-5.fc16.x86_64 uhci_hcd [ 4.076305] usb usb1: SerialNumber: 0000:00:01.2 [ 4.091799] Refined TSC clocksource calibration: 2677.185 MHz. [ 4.105911] hub 1-0:1.0: USB hub found [ 4.115835] hub 1-0:1.0: 2 ports detected [ 4.147486] usbcore: registered new interface driver usbserial [ 4.167002] USB Serial support registered for generic [ 4.179996] usbcore: registered new interface driver usbserial_generic [ 4.202861] usbserial: USB Serial Driver core [ 4.211934] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.233258] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.241291] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.255074] mousedev: PS/2 mouse device common for all mice [ 4.275424] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 4.310149] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100 [ 4.325107] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100 [ 4.339397] ata1.00: 62914560 sectors, multi 16: LBA48 [ 4.362818] ata1.00: configured for MWDMA2 [ 4.373968] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5 [ 4.393304] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 4.408850] rtc0: alarms up to one day, 114 bytes nvram [ 4.423453] device-mapper: uevent: version 1.0.3 [ 4.436554] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx [ 4.474247] usb 1-2: new full speed USB device number 2 using uhci_hcd [ 4.495976] ata2.00: configured for MWDMA2 [ 4.511333] cpuidle: using governor ladder [ 4.519271] cpuidle: using governor menu [ 4.529126] EFI Variables Facility v0.08 2004-May-17 [ 4.540361] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.556311] sd 0:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB) [ 4.575201] sd 0:0:0:0: [sda] Write Protect is off [ 4.586948] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.612829] usbcore: registered new interface driver usbhid [ 4.628550] usbhid: USB HID core driver [ 4.637882] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.651005] TCP cubic registered [ 4.658941] Initializing XFRM netlink socket [ 4.670660] NET: Registered protocol family 10 [ 4.690433] Mobile IPv6 [ 4.693485] NET: Registered protocol family 17 [ 4.698486] Registering the dns_resolver key type [ 4.703788] registered taskstats version 1 [ 4.711313] IMA: No TPM chip found, activating TPM-bypass! [ 4.719240] Magic number: 15:394:796 [ 4.723704] rtc_cmos 00:05: setting system clock to 2011-10-31 17:45:40 UTC (1320083140) [ 4.735181] Initializing network drop monitor service [ 4.939838] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 7.954331] usb 1-2: New USB device found, idVendor=0627, idProduct=0001 [ 7.960550] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.967135] usb 1-2: Product: QEMU USB Tablet [ 7.971435] usb 1-2: Manufacturer: QEMU 0.10.2 [ 7.975858] usb 1-2: SerialNumber: 1 [ 9.511381] ata2.00: qc timeout (cmd 0xa0) [ 9.514923] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 9.675770] ata2.00: configured for MWDMA2 [ 10.204455] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4 [ 10.211936] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0 [ 14.680417] ata2.00: qc timeout (cmd 0xa0) [ 14.685010] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 14.690798] ata2.00: limiting speed to MWDMA2:PIO3 [ 14.850811] ata2.00: configured for MWDMA2 [ 19.855357] ata2.00: qc timeout (cmd 0xa0) [ 19.859931] ata2.00: TEST_UNIT_READY failed (err_mask=0x4) [ 19.865765] ata2.00: disabled [ 19.869676] ata2: soft resetting link [ 20.056857] ata2: EH complete [ 35.712153] ata1: lost interrupt (Status 0x50) [ 35.722381] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 35.735437] ata1.00: failed command: READ DMA [ 35.745912] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 35.745913] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 35.777373] ata1.00: status: { DRDY } [ 35.785709] ata1: soft resetting link [ 35.946815] ata1.00: configured for MWDMA2 [ 35.955695] ata1.00: device reported invalid CHS sector 0 [ 35.967512] ata1: EH complete [ 66.784177] ata1: lost interrupt (Status 0x50) [ 66.788709] ata1.00: limiting speed to MWDMA1:PIO2 [ 66.793395] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 66.799857] ata1.00: failed command: READ DMA [ 66.804193] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 66.804194] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 66.818098] ata1.00: status: { DRDY } [ 66.822310] ata1: soft resetting link [ 66.981440] ata1.00: configured for MWDMA1 [ 66.985550] ata1.00: device reported invalid CHS sector 0 [ 66.990704] ata1: EH complete [ 97.760172] ata1: lost interrupt (Status 0x50) [ 97.765465] ata1.00: limiting speed to PIO2 [ 97.770093] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 97.777360] ata1.00: failed command: READ DMA [ 97.781823] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 97.781824] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 97.795560] ata1.00: status: { DRDY } [ 97.799269] ata1: soft resetting link [ 97.957830] ata1.00: configured for PIO2 [ 97.961338] ata1.00: device reported invalid CHS sector 0 [ 97.965874] ata1: EH complete [ 128.736132] ata1: lost interrupt (Status 0x58) [ 128.830108] ata1.00: limiting speed to PIO1 [ 128.834274] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 128.840650] ata1.00: failed command: READ MULTIPLE [ 128.845289] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in [ 128.845291] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 128.859072] ata1.00: status: { DRDY } [ 128.863253] ata1: soft resetting link [ 129.022319] ata1.00: configured for PIO1 [ 129.026279] ata1.00: device reported invalid CHS sector 0 [ 129.031398] ata1: EH complete [ 159.712158] ata1: lost interrupt (Status 0x58) [ 159.802324] ata1.00: limiting speed to PIO0 [ 159.806496] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 159.812888] ata1.00: failed command: READ MULTIPLE [ 159.817503] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in [ 159.817505] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 159.831339] ata1.00: status: { DRDY } [ 159.835482] ata1: soft resetting link [ 159.994295] ata1.00: configured for PIO0 [ 159.998279] ata1.00: device reported invalid CHS sector 0 [ 160.003401] ata1: EH complete [ 190.816215] ata1: lost interrupt (Status 0x58) [ 190.898787] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 190.904509] ata1.00: failed command: READ MULTIPLE [ 190.908616] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in [ 190.908617] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 190.920911] ata1.00: status: { DRDY } [ 190.924608] ata1: soft resetting link [ 191.082728] ata1.00: configured for PIO0 [ 191.086575] ata1.00: device reported invalid CHS sector 0 [ 191.091675] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 191.099098] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 191.108415] Descriptor sense data with sense descriptors (in hex): [ 191.114713] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 191.130002] 00 00 00 00 [ 191.136199] sd 0:0:0:0: [sda] Add. Sense: No additional sense information [ 191.143574] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 191.157045] end_request: I/O error, dev sda, sector 0 [ 191.161675] Buffer I/O error on device sda, logical block 0 [ 191.166372] ata1: EH complete [ 221.792133] ata1: lost interrupt (Status 0x58) [ 221.875310] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 221.882176] ata1.00: failed command: READ MULTIPLE [ 221.886834] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in [ 221.886836] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 221.901648] ata1.00: status: { DRDY } [ 221.906550] ata1: soft resetting link [ 222.124783] ata1.00: configured for PIO0 [ 222.127744] ata1.00: device reported invalid CHS sector 0 [ 222.132141] ata1: EH complete