[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Testing nested virtualization on Intel CPUs



On Fri, Sep 16, 2011 at 06:16:20PM -0700, AP wrote:
> I am testing out nested virtualization on a Lenovo x220 (Intel
> i7-2620M). I am running xen-unstable (23842:483c5f8319ad) and Linux
> 3.0 (Ubuntu 10.10).
> I brought up a Centos 5.6 VM and installed Xen that is packaged with
> it. I think it is a variant of 3.0. 
>

Xen hypervisor in RHEL5 / CentOS5 is heavily patched Xen 3.1.2+.
(the userland tools are 3.0.3-based though).


> The CentOS Xen VM boots very
> slowly but it does finally come up in to the nested Dom0. Now when I
> do an "xm create" of an HVM domain I just get a blank sdl screen. I
> don't even see the bios screen. Are there any more patches that I need
> to be adding to get this to work?
> 

Hmm.. I remember AMD guys mentioning nested virt Xen-on-Xen and KVM-on-Xen 
works OK in xen-unstable.
Not sure about the status of Intel nested virt currently.

You could also try using Xen 4.x in the CentOS VM, just to see if that makes a 
difference.
rpms in http://gitco.de/repo/

-- Pasi


> I have also included some log output. Please let me know if you need
> any other info.
> 
> Thanks,
> AP
> 
> Config of nested hypervisor VM
> =======================
> kernel = "hvmloader"
> builder='hvm'
> memory = 1024
> name = 'centos'
> vcpus = 1
> pae = 1
> acpi = 1
> apic = 1
> vif = [ 'bridge=br0' ]
> disk = ['phy:/dev/vollumvg/centos,hda,w', 'phy:/dev/vollumvg/centosfi,hdb,w']
> device_model = 'qemu-dm'
> vnc = 0
> sdl = 1
> stdvga = 1
> serial = 'pty'
> monitor=1
> usb=1
> videoram = 16
> nestedhvm = 1
> 
> Host Xen messages during nested hypervisor Xen VM boot
> ---------------------------------------------------------------------------------------
> (XEN) HVM2: HVM Loader
> (XEN) HVM2: Detected Xen v4.2-unstable
> (XEN) HVM2: Xenbus rings @0xfeffc000, event channel 2
> (XEN) HVM2: System requested ROMBIOS
> (XEN) HVM2: CPU speed is 2691 MHz
> (XEN) irq.c:269: Dom2 PCI link 0 changed 0 -> 5
> (XEN) HVM2: PCI-ISA link 0 routed to IRQ5
> (XEN) irq.c:269: Dom2 PCI link 1 changed 0 -> 10
> (XEN) HVM2: PCI-ISA link 1 routed to IRQ10
> (XEN) irq.c:269: Dom2 PCI link 2 changed 0 -> 11
> (XEN) HVM2: PCI-ISA link 2 routed to IRQ11
> (XEN) irq.c:269: Dom2 PCI link 3 changed 0 -> 5
> (XEN) HVM2: PCI-ISA link 3 routed to IRQ5
> (XEN) HVM2: pci dev 01:2 INTD->IRQ5
> (XEN) HVM2: pci dev 01:3 INTA->IRQ10
> (XEN) HVM2: pci dev 03:0 INTA->IRQ5
> (XEN) HVM2: pci dev 04:0 INTA->IRQ5
> (XEN) HVM2: pci dev 02:0 bar 10 size 01000000: f0000008
> (XEN) HVM2: pci dev 03:0 bar 14 size 01000000: f1000008
> (XEN) HVM2: pci dev 03:0 bar 10 size 00000100: 0000c001
> (XEN) HVM2: pci dev 04:0 bar 10 size 00000100: 0000c101
> (XEN) HVM2: pci dev 04:0 bar 14 size 00000100: f2000000
> (XEN) HVM2: pci dev 01:2 bar 20 size 00000020: 0000c201
> (XEN) HVM2: pci dev 01:1 bar 20 size 00000010: 0000c221
> (XEN) HVM2: Multiprocessor initialisation:
> (XEN) HVM2:  - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs
> [2/8] ... done.
> (XEN) HVM2: Testing HVM environment:
> (XEN) HVM2:  - REP INSB across page boundaries ... passed
> (XEN) HVM2:  - GS base MSRs and SWAPGS ... passed
> (XEN) HVM2: Passed 2 of 2 tests
> (XEN) HVM2: Writing SMBIOS tables ...
> (XEN) HVM2: Loading ROMBIOS ...
> (XEN) HVM2: 9724 bytes of ROMBIOS high-memory extensions:
> (XEN) HVM2:   Relocating to 0xfc000000-0xfc0025fc ... done
> (XEN) HVM2: Creating MP tables ...
> (XEN) HVM2: Loading Standard VGABIOS ...
> (XEN) HVM2: Loading PCI Option ROM ...
> (XEN) HVM2:  - Manufacturer: http://etherboot.org
> (XEN) HVM2:  - Product name: gPXE
> (XEN) HVM2: Loading ACPI ...
> (XEN) HVM2: vm86 TSS at fc012800
> (XEN) HVM2: BIOS map:
> (XEN) HVM2:  c0000-c9fff: VGA BIOS
> (XEN) HVM2:  ca000-d7fff: Etherboot ROM
> (XEN) HVM2:  f0000-fffff: Main BIOS
> (XEN) HVM2: E820 table:
> (XEN) HVM2:  [00]: 00000000:00000000 - 00000000:0009e000: RAM
> (XEN) HVM2:  [01]: 00000000:0009e000 - 00000000:000a0000: RESERVED
> (XEN) HVM2:  HOLE: 00000000:000a0000 - 00000000:000e0000
> (XEN) HVM2:  [02]: 00000000:000e0000 - 00000000:00100000: RESERVED
> (XEN) HVM2:  [03]: 00000000:00100000 - 00000000:3f000000: RAM
> (XEN) HVM2:  HOLE: 00000000:3f000000 - 00000000:fc000000
> (XEN) HVM2:  [04]: 00000000:fc000000 - 00000001:00000000: RESERVED
> (XEN) HVM2: Invoking ROMBIOS ...
> (XEN) HVM2: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
> (XEN) stdvga.c:147:d2 entering stdvga and caching modes
> (XEN) HVM2: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
> (XEN) HVM2: VBE Bios $Id: vbe.c,v 1.60 2008/03/02 07:47:21 vruppert Exp $
> (XEN) HVM2: Bochs BIOS - build: 06/23/99
> (XEN) HVM2: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
> (XEN) HVM2: Options: apmbios pcibios eltorito PMM
> (XEN) HVM2:
> (XEN) HVM2: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
> (XEN) HVM2: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (10240 MBytes)
> (XEN) HVM2: ata0-1: PCHS=10402/16/63 translation=lba LCHS=652/255/63
> (XEN) HVM2: ata0  slave: QEMU HARDDISK ATA-7 Hard-Disk (5120 MBytes)
> (XEN) HVM2:
> (XEN) HVM2:
> (XEN) HVM2:
> (XEN) HVM2: Press F12 for boot menu.
> (XEN) HVM2:
> (XEN) HVM2: Booting from Hard Disk...
> (XEN) HVM2: Booting from 0000:7c00
> (XEN) HVM2: int13_harddisk: function 41, unmapped device for ELDL=82
> (XEN) HVM2: int13_harddisk: function 08, unmapped device for ELDL=82
> (XEN) HVM2: *** int 15h function AX=00c0, BX=0000 not yet supported!
> (XEN) HVM2: int13_harddisk: function 02, unmapped device for ELDL=82
> (XEN) HVM2: int13_harddisk: function 41, unmapped device for ELDL=82
> (XEN) irq.c:269: Dom2 PCI link 0 changed 5 -> 0
> (XEN) irq.c:269: Dom2 PCI link 1 changed 10 -> 0
> (XEN) irq.c:269: Dom2 PCI link 2 changed 11 -> 0
> (XEN) irq.c:269: Dom2 PCI link 3 changed 5 -> 0
> 
> 
> Nested Xen Messages during nested VM boot
> -------------------------------------------------------------------
> (XEN) sysctl.c:51: Allowing physinfo call with newer ABI version
> (XEN) sysctl.c:51: Allowing physinfo call with newer ABI version
> (XEN) sysctl.c:51: Allowing physinfo call with newer ABI version
> (XEN) sysctl.c:51: Allowing physinfo call with newer ABI version
> (XEN) sysctl.c:51: Allowing physinfo call with newer ABI version
> (XEN) sysctl.c:51: Allowing physinfo call with newer ABI version
> (XEN) memory.c:124:d0 Could not allocate order=9 extent: id=1
> memflags=0 (0 of 1)
> (XEN) memory.c:124:d0 Could not allocate order=9 extent: id=1
> memflags=0 (0 of 1)
> (XEN) memory.c:124:d0 Could not allocate order=9 extent: id=1
> memflags=0 (0 of 1)
> (XEN) memory.c:124:d0 Could not allocate order=9 extent: id=1
> memflags=0 (0 of 1)
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.