[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] phy disks and vifs timing out in DomU (only on certain hardware)

On Fri, Jul 29, 2011 at 04:48:15PM +0100, Anthony Wright wrote:
> Ok, the plot thickens...

Please don't top post.
> I have installed virtually identical systems on two physical machines -
> identical (and I mean identical) xen, dom0, domU with possibly a

md5sum match?
> slightly different configuration for the domU. They're as close as I can
> get without imaging the disk. On both machines Dom0 starts normally, but
> on one physical machine the DomU starts correctly seeing the two tap:aio
> disks, the two phy disks and the vif, while on the other physical
> machine the DomU only sees the two tap:aio disks.
> The two pieces of hardware are quite different one is a 32 bit processor
> from 2000/2001 (this is the one that works), the other is a much more
> modern 64 bit processor about a year old.

Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.