[ 0.000000] Linux version 3.0.0-rc3 (root@localhost) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #1 SMP Tue Jun 14 01:37:08 CEST 2011 [ 0.000000] Command line: root=/dev/sda1 ro [ 0.000000] Disabled fast string operations [ 0.000000] released 0 pages of unused memory [ 0.000000] 1-1 mapping on a0->100 [ 0.000000] 1-1 mapping on 7fff0->100000 [ 0.000000] Set 524400 page(s) to 1-1 mapping. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009fc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] Xen: 0000000020000000 - 000000007fff0000 (unusable) [ 0.000000] Xen: 000000007fff0000 - 0000000080000000 (ACPI data) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000015fff0000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x15fff0 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 016e3000 [ 0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192 [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] 0000000000 - 0020000000 page 4k [ 0.000000] kernel direct mapping tables up to 20000000 @ 1fefe000-20000000 [ 0.000000] xen: setting RW the range 1ffec000 - 20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000015fff0000 [ 0.000000] 0100000000 - 015fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 15fff0000 @ 1f3f7000-1fefe000 [ 0.000000] xen: setting RW the range 1f6f9000 - 1fefe000 [ 0.000000] ACPI: RSDP 00000000000e0000 00024 (v02 VBOX ) [ 0.000000] ACPI: XSDT 000000007fff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061) [ 0.000000] ACPI: FACP 000000007fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) [ 0.000000] ACPI: DSDT 000000007fff0470 01A63 (v01 VBOX VBOXBIOS 00000002 INTL 20100528) [ 0.000000] ACPI: FACS 000000007fff0200 00040 [ 0.000000] ACPI: APIC 000000007fff0240 00054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061) [ 0.000000] ACPI: SSDT 000000007fff02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0015fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00100000 -> 0x0015fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3925 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 112696 pages, LIFO batch:31 [ 0.000000] Normal zone: 5376 pages used for memmap [ 0.000000] Normal zone: 387824 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.0 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88001febc000 s74752 r8192 d23552 u106496 [ 0.000000] pcpu-alloc: s74752 r8192 d23552 u106496 alloc=26*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504445 [ 0.000000] Kernel command line: root=/dev/sda1 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff880019200000 - ffff88001d200000 [ 0.000000] software IO TLB at phys 0x19200000 - 0x1d200000 [ 0.000000] Memory: 414724k/5767104k available (3396k kernel code, 3670468k absent, 1681912k reserved, 1567k data, 468k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:768 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> pirq=9 -> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 [ 0.000000] xen: --> pirq=2 -> irq=2 [ 0.000000] xen: --> pirq=3 -> irq=3 [ 0.000000] xen: --> pirq=4 -> irq=4 [ 0.000000] xen: --> pirq=5 -> irq=5 [ 0.000000] xen: --> pirq=6 -> irq=6 [ 0.000000] xen: --> pirq=7 -> irq=7 [ 0.000000] xen: --> pirq=8 -> irq=8 [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> pirq=9 -> irq=9 [ 0.000000] xen: --> pirq=10 -> irq=10 [ 0.000000] xen: --> pirq=11 -> irq=11 [ 0.000000] xen: --> pirq=12 -> irq=12 [ 0.000000] xen: --> pirq=13 -> irq=13 [ 0.000000] xen: --> pirq=14 -> irq=14 [ 0.000000] xen: --> pirq=15 -> irq=15 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2501.922 MHz processor. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5003.84 BogoMIPS (lpj=25019220) [ 0.010000] pid_max: default: 32768 minimum: 301 [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Disabled fast string operations [ 0.010000] SMP alternatives: switching to UP code [ 0.010031] Freeing SMP alternatives: 20k freed [ 0.010743] ACPI: Core revision 20110413 [ 0.012667] Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only. [ 0.014210] Brought up 1 CPUs [ 0.015156] xor: automatically using best checksumming function: generic_sse [ 0.060012] generic_sse: 2707.200 MB/sec [ 0.060694] xor: using function: generic_sse (2707.200 MB/sec) [ 0.061503] Grant table initialized [ 0.062213] NET: Registered protocol family 16 [ 0.063073] ACPI: bus type pci registered [ 0.063824] PCI: Using configuration type 1 for base access [ 0.065146] bio: create slab at 0 [ 0.230000] raid6: int64x1 2455 MB/s [ 0.400000] raid6: int64x2 2900 MB/s [ 0.570021] raid6: int64x4 2172 MB/s [ 0.740051] raid6: int64x8 2128 MB/s [ 0.910024] raid6: sse2x1 5591 MB/s [ 1.080045] raid6: sse2x2 7306 MB/s [ 1.250000] raid6: sse2x4 7785 MB/s [ 1.250637] raid6: using algorithm sse2x4 (7785 MB/s) [ 1.251899] ACPI: EC: Look up EC in DSDT [ 1.252429] ACPI: Executed 1 blocks of module-level executable AML code [ 1.256991] ACPI: Interpreter enabled [ 1.257625] ACPI: (supports S0 S5) [ 1.258411] ACPI: Using IOAPIC for interrupt routing [ 1.261348] ACPI: No dock devices found. [ 1.262207] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 1.263585] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.265666] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 1.265670] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 1.265672] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 1.265674] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored) [ 1.265741] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600 [ 1.266328] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601 [ 1.267358] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300 [ 1.270000] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe07fffff pref] [ 1.270000] pci 0000:00:03.0: [1022:2000] type 0 class 0x000200 [ 1.270000] pci 0000:00:03.0: reg 10: [io 0xd000-0xd01f] [ 1.270000] pci 0000:00:03.0: reg 14: [mem 0xf0000000-0xf0000fff] [ 1.270000] pci 0000:00:03.0: reg 18: [mem 0xf0080000-0xf00fffff] [ 1.270164] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880 [ 1.272329] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f] [ 1.274412] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff] [ 1.276425] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref] [ 1.280000] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03 [ 1.280000] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff] [ 1.280094] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680 [ 1.280872] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03 [ 1.282967] pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff] [ 1.290131] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106 [ 1.292444] pci 0000:00:0d.0: reg 10: [io 0xd040-0xd047] [ 1.296885] pci 0000:00:0d.0: reg 18: [io 0xd050-0xd057] [ 1.300000] pci 0000:00:0d.0: reg 20: [io 0xd060-0xd06f] [ 1.300000] pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff] [ 1.300000] pci_bus 0000:00: on NUMA node 0 [ 1.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.301309] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 1.305682] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11) [ 1.307249] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11) [ 1.308581] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11) [ 1.309892] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11) [ 1.310051] xen/balloon: Initialising balloon driver. [ 1.310957] last_pfn = 0x15fff0 max_arch_pfn = 0x400000000 [ 1.318386] xen-balloon: Initialising balloon driver. [ 1.319260] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.320000] vgaarb: loaded [ 1.320000] vgaarb: bridge control possible 0000:00:02.0 [ 1.320110] SCSI subsystem initialized [ 1.320760] libata version 3.00 loaded. [ 1.320798] usbcore: registered new interface driver usbfs [ 1.321509] usbcore: registered new interface driver hub [ 1.322274] usbcore: registered new device driver usb [ 1.323049] PCI: Using ACPI for IRQ routing [ 1.323763] PCI: pci_cache_line_size set to 64 bytes [ 1.323978] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 1.323981] reserve RAM buffer: 000000015fff0000 - 000000015fffffff [ 1.324104] Switching to clocksource xen [ 1.324822] pnp: PnP ACPI init [ 1.325431] ACPI: bus type pnp registered [ 1.326173] pnp 00:00: [bus 00-ff] [ 1.326176] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.326178] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.326180] pnp 00:00: [io 0x0d00-0xffff window] [ 1.326182] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.326184] pnp 00:00: [mem 0x80000000-0xffdfffff window] [ 1.326214] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.326234] pnp 00:01: [io 0x0060] [ 1.326236] pnp 00:01: [io 0x0064] [ 1.326245] xen: registering gsi 1 triggering 1 polarity 0 [ 1.326248] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 1.326953] xen: --> pirq=1 -> irq=1 [ 1.326997] pnp 00:01: [irq 1] [ 1.327018] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.327030] pnp 00:02: [io 0x0000-0x000f] [ 1.327032] pnp 00:02: [io 0x0080-0x008f] [ 1.327034] pnp 00:02: [io 0x00c0-0x00df] [ 1.327035] pnp 00:02: [dma 4] [ 1.327049] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.327096] xen: registering gsi 12 triggering 1 polarity 0 [ 1.327099] xen_map_pirq_gsi: returning irq 12 for gsi 12 [ 1.327796] xen: --> pirq=12 -> irq=12 [ 1.327820] pnp 00:03: [irq 12] [ 1.327839] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active) [ 1.327858] pnp 00:04: [io 0x0378-0x037f] [ 1.327860] pnp 00:04: [io 0x0778-0x077f] [ 1.327861] xen: registering gsi 7 triggering 1 polarity 0 [ 1.327863] xen_map_pirq_gsi: returning irq 7 for gsi 7 [ 1.328571] xen: --> pirq=7 -> irq=7 [ 1.328605] pnp 00:04: [irq 7] [ 1.328643] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.329586] pnp: PnP ACPI: found 5 devices [ 1.330000] ACPI: ACPI bus type pnp unregistered [ 1.330000] Switched to NOHz mode on CPU #0 [ 1.331673] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 1.332428] PCI: max bus depth: 0 pci_try_num: 1 [ 1.332437] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.332439] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 1.332490] NET: Registered protocol family 2 [ 1.333279] IP route cache hash table entries: 16384 (order: 5, 131072 bytes) [ 1.335078] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.336323] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.338001] TCP: Hash tables configured (established 65536 bind 65536) [ 1.338921] TCP reno registered [ 1.339562] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.340122] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.341249] NET: Registered protocol family 1 [ 1.341917] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.342662] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.343448] pci 0000:00:02.0: Boot video device [ 1.344129] PCI: CLS 64 bytes, default 64 [ 1.344241] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.348721] msgmni has been set to 810 [ 1.349537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.350648] io scheduler noop registered [ 1.351035] io scheduler deadline registered [ 1.351792] io scheduler cfq registered (default) [ 1.352765] ACPI: AC Adapter [AC] (on-line) [ 1.353531] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.354817] ACPI: Power Button [PWRF] [ 1.355713] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 [ 1.356910] ACPI: Sleep Button [SLPF] [ 1.357570] ACPI: acpi_idle registered with cpuidle [ 1.358723] Event-channel device installed. [ 1.360701] ACPI: Battery Slot [BAT0] (battery present) [ 1.362241] ahci 0000:00:0d.0: version 3.0 [ 1.362287] xen: registering gsi 21 triggering 0 polarity 1 [ 1.362298] xen: --> pirq=21 -> irq=21 [ 1.362335] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.363256] ahci: SSS flag set, parallel bus scan disabled [ 1.364116] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.365350] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc [ 1.368061] scsi0 : ahci [ 1.368919] scsi1 : ahci [ 1.369598] ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21 [ 1.370101] ata2: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806180 irq 21 [ 1.370101] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx [ 1.372695] xen: registering gsi 19 triggering 0 polarity 1 [ 1.372712] xen: --> pirq=19 -> irq=19 [ 1.372742] pcnet32 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.373682] pcnet32: PCnet/FAST III 79C973 at 0xd000, 08:00:27:87:89:59 assigned IRQ 19 [ 1.375346] pcnet32: Found PHY 0022:561b at address 0 [ 1.376237] pcnet32: eth0: registered as PCnet/FAST III 79C973 [ 1.377491] pcnet32: 1 cards_found [ 1.378811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.379680] xen: registering gsi 19 triggering 0 polarity 1 [ 1.379693] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 1.380102] xen: --> pirq=19 -> irq=19 [ 1.380131] Already setup the GSI :19 [ 1.380764] ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.381595] ehci_hcd 0000:00:0b.0: EHCI Host Controller [ 1.382357] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 1.383878] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000 [ 1.400168] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00 [ 1.400975] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.401767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.402969] usb usb1: Product: EHCI Host Controller [ 1.408444] usb usb1: Manufacturer: Linux 3.0.0-rc3 ehci_hcd [ 1.409293] usb usb1: SerialNumber: 0000:00:0b.0 [ 1.410213] hub 1-0:1.0: USB hub found [ 1.410954] hub 1-0:1.0: 8 ports detected [ 1.411806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.412736] xen: registering gsi 22 triggering 0 polarity 1 [ 1.412747] xen: --> pirq=22 -> irq=22 [ 1.412778] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.413783] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.414563] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2 [ 1.416006] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000 [ 1.470522] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.471617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.473277] usb usb2: Product: OHCI Host Controller [ 1.474217] usb usb2: Manufacturer: Linux 3.0.0-rc3 ohci_hcd [ 1.475207] usb usb2: SerialNumber: 0000:00:06.0 [ 1.476264] hub 2-0:1.0: USB hub found [ 1.477145] hub 2-0:1.0: 8 ports detected [ 1.478482] uhci_hcd: USB Universal Host Controller Interface driver [ 1.479348] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.482753] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.483747] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.484727] mousedev: PS/2 mouse device common for all mice [ 1.485811] md: linear personality registered for level -1 [ 1.486785] md: raid0 personality registered for level 0 [ 1.487733] md: raid1 personality registered for level 1 [ 1.488391] md: raid10 personality registered for level 10 [ 1.490093] md: raid6 personality registered for level 6 [ 1.491087] md: raid5 personality registered for level 5 [ 1.491859] md: raid4 personality registered for level 4 [ 1.491859] cpuidle: using governor ladder [ 1.491859] cpuidle: using governor menu [ 1.494899] usbcore: registered new interface driver usbhid [ 1.495911] usbhid: USB HID core driver [ 1.496892] TCP cubic registered [ 1.497695] NET: Registered protocol family 17 [ 1.498671] Kernel not built with RTC support, ALARM timers will not wake from suspend [ 1.501771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.720350] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.722733] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 [ 1.724444] ata1.00: 12582912 sectors, multi 128: LBA48 NCQ (depth 31/32) [ 1.726792] ata1.00: configured for UDMA/133 [ 1.728513] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 [ 1.735294] sd 0:0:0:0: [sda] 12582912 512-byte logical blocks: (6.44 GB/6.00 GiB) [ 1.739903] sd 0:0:0:0: [sda] Write Protect is off [ 1.740668] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.741863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.746106] sda: sda1 sda2 [ 1.748627] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.830338] usb 2-1: new full speed USB device number 2 using ohci_hcd [ 2.030953] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021 [ 2.032964] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.035156] usb 2-1: Product: USB Tablet [ 2.036752] usb 2-1: Manufacturer: VirtualBox [ 2.047300] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input3 [ 2.050904] generic-usb 0003:80EE:0021.0001: input: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 [ 2.080462] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.083025] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 [ 2.084503] ata2.00: applying bridge limits [ 2.086369] ata2.00: configured for UDMA/100 [ 2.088875] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 2.092418] md: Waiting for all devices to be available before autodetect [ 2.094290] md: If you don't use raid, use raid=noautodetect [ 2.096683] md: Autodetecting RAID arrays. [ 2.098540] md: Scanned 0 and added 0 devices. [ 2.100135] md: autorun ... [ 2.101798] md: ... autorun DONE. [ 2.105364] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 2.117655] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.120706] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.124137] Freeing unused kernel memory: 468k freed [ 2.939306] udevd (132): /proc/132/oom_adj is deprecated, please use /proc/132/oom_score_adj instead. [ 2.939321] udev: starting version 141 [ 3.455791] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray [ 3.455796] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.455889] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.981720] Real Time Clock Driver v1.12b [ 4.690081] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.598794] pcnet32 0000:00:03.0: eth0: link up, 100Mbps, full-duplex [ 12.656899] Adding 524284k swap on /dev/sda2. Priority:-1 extents:1 across:524284k [ 13.030448] XENBUS: Unable to read cpu state [ 28.758205] Bridge firewalling registered