[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] PV networking issue in 2.6.38.6 and 2.6.39-rc7 pvops dom0 kernels



On 05/16/2011 09:58 AM, Ian Campbell wrote:
On Mon, 2011-05-16 at 07:51 +0100, Pasi KÃrkkÃinen wrote:
Hello,

Ian: Any idea what could cause this error message (more info below):

"XENBUS: Timeout connecting to device: device/vif/0 (state 1)"

Is this from the domU or the dom0?

This is from the domU.


Do other devices work ok?


Yes, everything else seems to be working fine.


User says replacing 2.6.38/2.6.39 pvops dom0 kernel with xenlinux one
fixes the problem..

2.6.38 didn't have netback, only 2.6.39-rc1 did. Mario, please can you
supply the .config you used with the 2.6.39 kernel and the exact commit
id you are using. It would also be useful to see a complete log from
both dom0 and domU.


Well, when i saw that 2.6.39-rc7 did not work, and i did not expect anyone to care, i simply wiped all of the pvops stuff that i was testing, and replaced it with a gentoo patched kernel wich works. If it will not be in vain, i will compile it again and give you more details.


Do the vif entries appear in XenStore? Using:
        xenstore-ls /local/domain/$(xl domid<name>)/devices/vif
you should see some entries and those entries should reference a backend
path which should also contains entries, please post both.


Well, from what i remember, only vhd was being shown, but i will try and get you exact info today.


Ian.


-- Pasi

On Sun, May 15, 2011 at 07:24:54PM +0200, Mario wrote:


On 05/15/2011 07:20 PM, Pasi KÃrkkÃinen wrote:
On Sun, May 15, 2011 at 08:03:45PM +0300, Pasi KÃrkkÃinen wrote:
On Sun, May 15, 2011 at 06:41:25PM +0200, Mario wrote:
On 05/15/2011 06:34 PM, Pasi KÃrkkÃinen wrote:
On Sun, May 15, 2011 at 06:24:11PM +0200, Mario wrote:


On 05/15/2011 06:12 PM, Pasi KÃrkkÃinen wrote:
On Sun, May 15, 2011 at 06:02:02PM +0200, Mario wrote:
On 05/15/2011 05:53 PM, Pasi KÃrkkÃinen wrote:
On Sun, May 15, 2011 at 02:36:11PM +0200, Mario wrote:
Hey everyone,

I have been trying to make Xen-4.1.0 work on kernels mentioned in the
subject, without much sucess. HVM guests are not affected, only PV.


Below you mention gentoo xenlinux patches..

So please be more specific about which kernel was vanilla (pvops),
and which kernels had some external patches applied..

-- Pasi


Sorry, both kernels in subject were vanilla from kernel.org, with xen
options selected for dom0 usage.
I only wanted to point out that networking works if i use kernel patched
with rebased gentoo patches.
I am talking only about dom0 kernel here, domU kernel does not seem to
be the source of the problem.


OK. What kernel is the PV domU running? What Xen version are you using? 4.1 ?

-- Pasi


Well, i have tried following kernels in domU:

2.6.31.6 (i got this one from stacklet)
2.6.37.6-domU
2.6.33.4-domU

Are these pvops/vanilla or with some patches?

Those are pvops/vanilla, no patches.



2.6.38.6-xen (dom0 kernel)
2.6.34.7-xen (dom0 kernel)
2.6.39-rc7-xen (dom0 kernel)

None of them made any difference, they were all complaining about vif.
Yeah, I am running Xen 4.1


Are you using xm/xend or xl/libxl toolstack?

I am using xl/libxl with Xen 4.1


Ok. Have you tried Jeremy's xen.git xen/stable-2.6.32.x as a dom0 kernel?
It would be interesting to know if that works for you or not.


Btw. Did you realize upstream 2.6.38 / 2.6.39 does not yet have
xen-blkback driver included? also blktap2 driver is missing.

So you you can only use the phy: or file: backends, assuming Xen 4.1,
which has the (slow) fallback qemu-based userspace blkback implementation.

-- Pasi




Yes i have, but seeing that HVM networking works, i wanted to report the
PV one that doesn't.


m.





Error that i see in dmesg on the domU:
XENBUS: Timeout connecting to device: device/vif/0 (state 1)

ifconfig -a on domU shows MAC address: 00:00:00:00:00:00

dom0 doesn't have any vif/tap interfaces assigned to domU when i do
brctl show or ifconfig -a

I don't see any errors worth mentioning in /var/log/xen, except mybe
these two:

/tmp/SBo/xen-4.1.0/tools/ioemu-qemu-xen/hw/xen_blktap.c:628: Init blktap
pipes
Could not open /var/run/tap/qemu-read-2

Problem goes away when i boot 2.6.34.7 (it is the last kernel that i
have built with gentoo rebased patches).

If there is something i can do to help debug this please do let me know.


Best regards,
mario

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.