[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2] xen mmu: fix a race window causing leave_mm BUG()



commit ba1707117fee7e712290c7bb3cd67085a55e01ce
Author: Kevin Tian <kevin.tian@xxxxxxxxx>
Date:   Thu May 12 10:01:19 2011 +0800

    xen mmu: fix a race window causing leave_mm BUG()
    
    there's a race window in xen_drop_mm_ref, where remote cpu may exit
    dirty bitmap between the check on this cpu and the point where remote
    cpu handles drop request. So in drop_other_mm_ref we need check
    whether TLB state is still lazy before calling into leave_mm. This
    bug is rarely observed in earlier kernel, but exaggerated by the
    commit 831d52bc153971b70e64eccfbed2b232394f22f8 which clears bitmap
    after changing the TLB state. the call trace is as below:
    
    ---------------------------------
    kernel BUG at arch/x86/mm/tlb.c:61!
    invalid opcode: 0000 [#1] SMP
    last sysfs file: /sys/devices/system/xen_memory/xen_memory0/info/current_kb
    CPU 1
    Modules linked in: 8021q garp xen_netback xen_blkback blktap 
blkback_pagemap nbd bridge stp llc autofs4 ipmi_devintf ipmi_si ipmi_msghandler 
lockd sunrpc bonding ipv6 xenfs dm_multipath video output sbs sbshc parport_pc 
lp parport ses enclosure snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq 
snd_seq_device serio_raw bnx2 snd_pcm_oss snd_mixer_oss snd_pcm snd_timer 
iTCO_wdt snd soundcore snd_page_alloc i2c_i801 iTCO_vendor_support i2c_core pcs 
pkr pata_acpi ata_generic ata_piix shpchp mptsas mptscsih mptbase [last 
unloaded: freq_table]
    Pid: 25581, comm: khelper Not tainted 2.6.32.36fixxen #1 Tecal RH2285
    RIP: e030:[<ffffffff8103a3cb>]  [<ffffffff8103a3cb>] leave_mm+0x15/0x46
    RSP: e02b:ffff88002805be48  EFLAGS: 00010046
    RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88015f8e2da0
    RDX: ffff88002805be78 RSI: 0000000000000000 RDI: 0000000000000001
    RBP: ffff88002805be48 R08: ffff88009d662000 R09: dead000000200200
    R10: dead000000100100 R11: ffffffff814472b2 R12: ffff88009bfc1880
    R13: ffff880028063020 R14: 00000000000004f6 R15: 0000000000000000
    FS:  00007f62362d66e0(0000) GS:ffff880028058000(0000) knlGS:0000000000000000
    CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 0000003aabc11909 CR3: 000000009b8ca000 CR4: 0000000000002660
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000000 00
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process khelper (pid: 25581, threadinfo ffff88007691e000, task 
ffff88009b92db40)
    Stack:
     ffff88002805be68 ffffffff8100e4ae 0000000000000001 ffff88009d733b88
    <0> ffff88002805be98 ffffffff81087224 ffff88002805be78 ffff88002805be78
    <0> ffff88015f808360 00000000000004f6 ffff88002805bea8 ffffffff81010108
    Call Trace:
     <IRQ>
     [<ffffffff8100e4ae>] drop_other_mm_ref+0x2a/0x53
     [<ffffffff81087224>] generic_smp_call_function_single_interrupt+0xd8/0xfc
     [<ffffffff81010108>] xen_call_function_single_interrupt+0x13/0x28
     [<ffffffff810a936a>] handle_IRQ_event+0x66/0x120
     [<ffffffff810aac5b>] handle_percpu_irq+0x41/0x6e
     [<ffffffff8128c1c0>] __xen_evtchn_do_upcall+0x1ab/0x27d
     [<ffffffff8128dd11>] xen_evtchn_do_upcall+0x33/0x46
     [<ffffffff81013efe>] xen_do_hyper visor_callback+0x1e/0x30
     <EOI>
     [<ffffffff814472b2>] ? _spin_unlock_irqrestore+0x15/0x17
     [<ffffffff8100f8cf>] ? xen_restore_fl_direct_end+0x0/0x1
     [<ffffffff81113f71>] ? flush_old_exec+0x3ac/0x500
     [<ffffffff81150dc5>] ? load_elf_binary+0x0/0x17ef
     [<ffffffff81150dc5>] ? load_elf_binary+0x0/0x17ef
     [<ffffffff8115115d>] ? load_elf_binary+0x398/0x17ef
     [<ffffffff81042fcf>] ? need_resched+0x23/0x2d
     [<ffffffff811f4648>] ? process_measurement+0xc0/0xd7
     [<ffffffff81150dc5>] ? load_elf_binary+0x0/0x17ef
     [<ffffffff81113094>] ? search_binary_handler+0xc8/0x255
     [<ffffffff81114362>] ? do_execve+0x1c3/0x29e
     [<ffffffff8101155d>] ? sys_execve+0x43/0x5d
     [<ffffffff8106fc45>] ? __call_usermodehelper+0x0/0x6f
     [<ffffffff81013e28>] ? kernel_execve+0x68/0xd0
     [<ffffffff 8106fc45>] ? __call_usermodehelper+0x0/0x6f
     [<ffffffff8100f8cf>] ? xen_restore_fl_direct_end+0x0/0x1
     [<ffffffff8106fb64>] ? ____call_usermodehelper+0x113/0x11e
     [<ffffffff81013daa>] ? child_rip+0xa/0x20
     [<ffffffff8106fc45>] ? __call_usermodehelper+0x0/0x6f
     [<ffffffff81012f91>] ? int_ret_from_sys_call+0x7/0x1b
     [<ffffffff8101371d>] ? retint_restore_args+0x5/0x6
     [<ffffffff81013da0>] ? child_rip+0x0/0x20
    Code: 41 5e 41 5f c9 c3 55 48 89 e5 0f 1f 44 00 00 e8 17 ff ff ff c9 c3 55 
48 89 e5 0f 1f 44 00 00 65 8b 04 25 c8 55 01 00 ff c8 75 04 <0f> 0b eb fe 65 48 
8b 34 25 c0 55 01 00 48 81 c6 b8 02 00 00 e8
    RIP  [<ffffffff8103a3cb>] leave_mm+0x15/0x46
     RSP <ffff88002805be48>
    ---[ end trace ce9cee6832a9c503 ]---
    
    thanks for Maoxiaoyun<tinnycloud@xxxxxxxxxxx> to verify it.
    
    Signed-off-by: Kevin Tian <kevin.tian@xxxxxxxxx>

diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 55c965b..8b745fb 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1187,7 +1187,7 @@ static void drop_other_mm_ref(void *info)
 
        active_mm = percpu_read(cpu_tlbstate.active_mm);
 
-       if (active_mm == mm)
+       if (active_mm == mm && percpu_read(cpu_tlbstate.state) != TLBSTATE_OK)
                leave_mm(smp_processor_id());
 
        /* If this cpu still has a stale cr3 reference, then make sure

Attachment: 20100512_fix_leave_mm_bug_v2.patch
Description: 20100512_fix_leave_mm_bug_v2.patch

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.