[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Re: [Xen-devel] Re: HVM DomU, msi_translate=0, MSI/MSI-X PCI passthrough fails.



> > Just a recap:
> >      you pass through:
> >      - 3 physical nics/IGB
> >      - 1 ISDN pci ISDN box
> 
> The redfone box runs on 1 of the nics - its not seperate. It converts
> ISDN to TDMoE see here.. http://www.red-fone.com/
> 
> >      - all using msi/msi-x interrupts ?
> 
> I tried using msi/msi-x interrupts, but it caused the raid card to drop
> off (after some use) and provided seemingly even worse performance than
> pegging everything back to legacy.

Were you able to get a serial log and hit all of the differetn debug options
when the the RAID card died?
> 
> > 
> > Have you tried using a PV domU instead of a HVM domU ?
> 
> I initially tried PV but had issues with the igb NIC's. There was
> another thread somewhere about my issues with that.

Hmm, the only other thread I see from you is about the RAID.
> 
> 
> > Have you tried passing through only the ISDN box, and let the network run 
> > with the xen backend/frontend to rule out the IGB/network stuff ?

Mr. Sander idea of isolating one piece by piece is the right way.

There is a bunch of warnings in the QEMU output - some of them quite .. 
troubling.

You seem to have issues with gntdev (as in, not found), but if you are using 
OpenSuSE
then that would work - I think. When you tested xen-unstable did you use the
OpenSUSE kernel or the PV-OPS one?

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.