[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Problem: WIndows domu switches power off


  • To: "Kay, Allen M" <allen.m.kay@xxxxxxxxx>
  • From: Dietmar Hahn <dietmar.hahn@xxxxxxxxxxxxxx>
  • Date: Thu, 11 Nov 2010 08:12:16 +0100
  • Cc: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Wed, 10 Nov 2010 23:13:21 -0800
  • Domainkey-signature: s=s1536a; d=ts.fujitsu.com; c=nofws; q=dns; h=X-SBRSScore:X-IronPort-AV:Received:X-IronPort-AV: Received:Received:From:To:Subject:Date:User-Agent:Cc: References:In-Reply-To:X-KMail-Markup:MIME-Version: Content-Type:Content-Transfer-Encoding:Message-Id; b=m+W9MVqkTUTI4qr6jw9Zi+rYHAuZfWIQxrCN2IKBwsxRR782lyipB/pB e9is883fqQ4D4eCiMOHaM5lrNxrCRMkr2TPDxkpE7RINB/+RjCiD1w/fC KF3tsgauPaxVpaeAVx8YpZWHQkIAm5oXy6+RXTA5T/JMSQnvfV9hFkTZg 33ekjpWkig33WZ5zeRpK02x7tx2o53c8/q46DSklYU0rPNcA2YwM4MEdb ipdC0Q5IrUfMRVYdlN2/aZiROGGrk;
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>

Am 11.11.2010 schrieb ""Kay, Allen M" <allen.m.kay@xxxxxxxxx>":

> As Keir replied, PCI segment for most systems are 0.

>

> Can you provide more detail on what is not working? Is it wlan driver in the guest cannot start successfully or something even more severe?

The time when the power get switched of is different. Sometimes (if I'am fast

enough) I can login into Windows and see 2 WLAN networks but sometimes Windows

comes up and without logging in the power get switched off.

I will try xen-unstable now.

Dietmar.

>

> Allen

>

> From: Dietmar Hahn [mailto:dietmar.hahn@xxxxxxxxxxxxxx]

> Sent: Wednesday, November 10, 2010 5:28 AM

> To: Kay, Allen M

> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx

> Subject: Re: [Xen-devel] Problem: WIndows domu switches power off

>

>

> Am 08.11.2010 schrieb ""Kay, Allen M" <allen.m.kay@xxxxxxxxx>":

>

> > > # lspci -n -s 10:00.0

>

> > > 10:00.0 0280: 8086:422c (rev 35)

>

> > > And the id 8086:422c is not in your switch statement and therewith

>

> > > map_me_phantom_function() is not called.

>

> >

>

> > Have you tried to add "case 0x422c8086" to code to see if it solve the problem for you?

>

> Yes I tried this but it didn't help.

>

> I have to admit that I took only the me_wifi_quirk() part of your patch and

>

> hacked this in our SLES11 SP1 hypervisor source.

>

> After looking a little bit deeper into the sources I have some questions.

>

> I have 3 drhd units. After tracing in acpi_parse_one_drhd() I saw that the

>

> segment item in the acpi_table_drhd is always 0. When my phantom device

>

> should be mapped (0.22.7) it uses the iommu with the INCLUDE_ALL flag set.

>

> But this drhd addresses the segment 0 too.

>

> The Intel VTd-spec writes in chapter 8.3. "DMA Remapping Hardware Unit

>

> Definition Structure" that the "Segment Number" is the PCI Segment associated

>

> with this unit.

>

> So what is a PCI Segment here?

>

> But my WLAN card is on bus 10. Is then the bus 10 belonging to the segment 0

>

> too or is the bus number wrong.

>

> Or is there no drhd - unit for the bus 10 because the BIOS didn't set up this

>

> table right?

>

> Thanks.

>

> Dietmar.

>

> (XEN) [VT-D]dmar.c:700: Host address width 36

>

> (XEN) [VT-D]dmar.c:715: found ACPI_DMAR_DRHD:

>

> (XEN) [VT-D]dmar.c:407: dmaru->address = fed90000

>

> (XEN) [VT-D]iommu.c:1219: drhd->address = fed90000 iommu->reg = ffff82c3fff57000

>

> (XEN) [VT-D]iommu.c:1221: cap = c9008020e30272 ecap = 1000

>

> (XEN) [VT-D]dmar.c:342: endpoint: 0:1b.0

>

> (XEN) [VT-D]dmar.c:715: found ACPI_DMAR_DRHD:

>

> (XEN) [VT-D]dmar.c:407: dmaru->address = fed91000

>

> (XEN) [VT-D]iommu.c:1219: drhd->address = fed91000 iommu->reg = ffff82c3fff56000

>

> (XEN) [VT-D]iommu.c:1221: cap = c0000020230272 ecap = 1000

>

> (XEN) [VT-D]dmar.c:342: endpoint: 0:2.0

>

> (XEN) [VT-D]dmar.c:715: found ACPI_DMAR_DRHD:

>

> (XEN) [VT-D]dmar.c:407: dmaru->address = fed93000

>

> (XEN) [VT-D]iommu.c:1219: drhd->address = fed93000 iommu->reg = ffff82c3fff55000

>

> (XEN) [VT-D]iommu.c:1221: cap = c9008020630272 ecap = 1000

>

> (XEN) [VT-D]dmar.c:425: flags: INCLUDE_ALL

>

> (XEN) [VT-D]dmar.c:720: found ACPI_DMAR_RMRR:

>

> (XEN) [VT-D]dmar.c:342: endpoint: 0:1d.0

>

> (XEN) [VT-D]dmar.c:342: endpoint: 0:1a.0

>

> (XEN) [VT-D]dmar.c:592: RMRR region: base_addr bb6e9000 end_address bb6fffff

>

> (XEN) [VT-D]dmar.c:720: found ACPI_DMAR_RMRR:

>

> (XEN) [VT-D]dmar.c:342: endpoint: 0:2.0

>

> (XEN) [VT-D]dmar.c:592: RMRR region: base_addr bde00000 end_address bfffffff

>

> >

>

> > By the way, I do not have access to this Fujitsu machine so I would need to rely on you to see if adding the wifi ID would work.

>

> >

>

> > Allen

>

> >

>

> > ------

>

> >

>

> > From: Dietmar Hahn [mailto:dietmar.hahn@xxxxxxxxxxxxxx]

>

> > Sent: Monday, November 08, 2010 6:18 AM

>

> > To: Kay, Allen M

>

> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxx

>

> > Subject: Re: [Xen-devel] Problem: WIndows domu switches power off

>

> >

>

> > Hi Allen,

>

> > Am 05.11.2010 schrieb ""Kay, Allen M" <allen.m.kay@xxxxxxxxx>":

>

> > > Dietmar,

>

> > >

>

> > > This is a known issue with WLAN passthrough cause by ME (management engine) interaction. The latest xen-unstable has quirk to workaround issue.

>

> > Are you think of this quirk:

>

> > http://xenbits.xensource.com/staging/xen-unstable.hg?rev/b48d8f27fca2

>

> > > Can you give it a try and let me know if it fixes the problem for you?

>

> > I looked at the sources and found your me_wifi_quirk() stuff.

>

> > But if I understand the code right, the patch doesn't help.

>

> > # lspci -n -s 00:00.0

>

> > 00:00.0 0600: 8086:0044 (rev 02)

>

> > So IS_ILK(id) should be true.

>

> > But my WLAN adapter is:

>

> > 10:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)

>

> > # lspci -n -s 10:00.0

>

> > 10:00.0 0280: 8086:422c (rev 35)

>

> > And the id 8086:422c is not in your switch statement and therewith

>

> > map_me_phantom_function() is not called.

>

> > By the way I don't see a pci device 0:22.7

>

> > > By the way, which brand of Core i5 laptop do you have. I would like to see if I have one locally.

>

> > It's a Fujitsu Lifebook S760

>

> > Following the intel spec I checked the device id of the D31:F0 device function:

>

> > 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)

>

> > # lspci -n -s 00:1f.0

>

> > 00:1f.0 0601: 8086:3b07 (rev 05)

>

> > And this is the Intel(r) QM57 Chipset.

>

> > Thanks.

>

> > Dietmar.

>

> > For your information:

>

> > # lspci

>

> > 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)

>

> > 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)

>

> > 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)

>

> > 00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)

>

> > 00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)

>

> > 00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)

>

> > 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)

>

> > 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)

>

> > 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)

>

> > 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)

>

> > 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)

>

> > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)

>

> > 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)

>

> > 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)

>

> > 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)

>

> > 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)

>

> > 10:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)

>

> > ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)

>

> > ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)

>

> > ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)

>

> > ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)

>

> > ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

>

> > ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

>

> > >

>

> > > Allen

>

> > >

>

> > > From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Dietmar Hahn

>

> > > Sent: Tuesday, October 26, 2010 12:24 AM

>

> > > To: xen-devel@xxxxxxxxxxxxxxxxxxx

>

> > > Subject: [Xen-devel] Problem: WIndows domu switches power off

>

> > >

>

> > >

>

> > > Hi list,

>

> > >

>

> > > I have a special effect on a Laptop with:

>

> > >

>

> > > cpu: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz with integrated graphics

>

> > >

>

> > > Chipsatz: Intel QM57

>

> > >

>

> > > with SLES11 SP1 (xen-4.0 with some patches from Novell)

>

> > >

>

> > > I passed through the sound and WLAN pci controller to the gues

>

> > >

>

> > > I start a Windows 7 guest and while installing the driver for the WLAN

>

> > >

>

> > > controller within Windows the power of the notebook got switched off.

>

> > >

>

> > > I couldnt see any message on the serial console.

>

> > >

>

> > > I tried Windows on bare metall and all runs very well. Later on starting this

>

> > >

>

> > > Windows guest again the power got switched of after login into Windows - maybe

>

> > >

>

> > > the WLAN driver got started there.

>

> > >

>

> > > For a test I prepared a OpenSuSE 11.3 as HVM guest and were able to configure

>

> > >

>

> > > the WLAN device without any problems.

>

> > >

>

> > > And here I need some assistance to prevent the power off and to add some tracer

>

> > >

>

> > > in the hypervisor.

>

> > >

>

> > > By the way I have no problems with the sound device.

>

> > >

>

> > > If wanted I can add more informations.

>

> > >

>

> > > Thanks.

>

> > >

>

> > > Dietmar.

--

Company details: http://ts.fujitsu.com/imprint.html

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.