[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] pv-ops domU not working with MSI interrupts on Nehalem



It doesn't help with "iommu=off". Here is the kernel command line I set.

 (XEN) Command line: dummy=dummy dom0_mem=1024M dom0_max_vcpus=1 
dom0_vcpus_pin=true iommu=off,passthrough,no-intremap loglvl=all 
loglvl_guest=all loglevl=10 debug apic=on apic_verbosity=verbose 
extra_guest_irqs=80 com1=115200,8n1 console=com1 console_to_ring noirqbalance 
xen-pciback.permissive acpi=force numa=on


-Ray

-----Original Message-----
From: Jiang, Yunhong [mailto:yunhong.jiang@xxxxxxxxx]
Sent: Tuesday, September 28, 2010 5:54 PM
To: Konrad Rzeszutek Wilk; Lin, Ray; JBeulich@xxxxxxxxxx
Cc: Bruce Edge; xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-devel] pv-ops domU not working with MSI interrupts on Nehalem


>-----Original Message-----
>From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@xxxxxxxxxx]
>Sent: Wednesday, September 29, 2010 12:19 AM
>To: Lin, Ray; JBeulich@xxxxxxxxxx
>Cc: Bruce Edge; Jiang, Yunhong; xen-devel@xxxxxxxxxxxxxxxxxxx
>Subject: Re: [Xen-devel] pv-ops domU not working with MSI interrupts on
>Nehalem
>
>On Tue, Sep 28, 2010 at 10:08:57AM -0600, Lin, Ray wrote:
>>     I just checked the "xen dmesg". Look like DMA/iommu is the root
>> cause of
>this issue. In order to tell the source of interrupt, Tachyon chip
>needs to do the DMA write to a dword memory location to indicate the
>source of interrupt. What iommu option do you recommend to use ?
>
>Lets get Jan involved in this discussion.
>
>Jan, would some of your patches that inhibit the MSI write affect this
>in a PV guest?

As far as I can tell, this patch should not cause issue to VT-d side, instead, 
it's more about access from CPU.
Can you try to pass a option to xen as "iommu=off", and check the result?

Thanks
--jyh

>
>>
>> (XEN) [VT-D]iommu.c:824: iommu_fault_status: Primary Pending Fault
>> (XEN) [VT-D]iommu.c:799: DMAR:[DMA Write] Request device [07:00.0]
>> fault addr
>c00000, iommu reg = ffff82c3fff57000
>> (XEN) DMAR:[fault reason 05h] PTE Write access is not set
>> (XEN) print_vtd_entries: iommu = ffff83019fffa370 bdf = 7:0.0 gmfn = c00
>> (XEN)     root_entry = ffff83019ff70000
>> (XEN)     root_entry[7] = 19cf52001
>> (XEN)     context = ffff83019cf52000
>> (XEN)     context[0] = 102_706dc005
>> (XEN)     l4 = ffff8300706dc000
>> (XEN)     l4_index = 0
>> (XEN)     l4[0] = 706db003
>> (XEN)     l3 = ffff8300706db000
>> (XEN)     l3_index = 0
>> (XEN)     l3[0] = 706da003
>> (XEN)     l2 = ffff8300706da000
>> (XEN)     l2_index = 6
>> (XEN)     l2[6] = 0
>>
>>
>> -Ray
>>
>>
>> ________________________________
>> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Bruce Edge
>> Sent: Monday, September 27, 2010 9:46 PM
>> To: Jiang, Yunhong
>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Konrad Rzeszutek Wilk
>> Subject: Re: [Xen-devel] pv-ops domU not working with MSI interrupts
>> on Nehalem
>>
>> On Mon, Sep 27, 2010 at 8:26 PM, Jiang, Yunhong
><yunhong.jiang@xxxxxxxxx<mailto:yunhong.jiang@xxxxxxxxx>> wrote:
>> "xm dmesg" should gives xen's boot log, and sometimes it contain some
>> helpful
>information, I think, especially loglvl and guest_loglvl is set to all.
>>
>> I looked at the xm dmesg output and there's nothing more than what I
>> already
>provided, aside from a bunch of commands from me poking at it.
>>
>> -Bruce
>>
>>
>> Thanks
>> --jyh
>>
>> From: Bruce Edge
>[mailto:bruce.edge@xxxxxxxxx<mailto:bruce.edge@xxxxxxxxx>]
>> Sent: Tuesday, September 28, 2010 11:16 AM
>> To: Jiang, Yunhong
>> Cc: Konrad Rzeszutek Wilk;
>xen-devel@xxxxxxxxxxxxxxxxxxx<mailto:xen-devel@xxxxxxxxxxxxxxxxxxx>
>>
>> Subject: Re: [Xen-devel] pv-ops domU not working with MSI interrupts
>> on Nehalem
>>
>> On Mon, Sep 27, 2010 at 6:15 PM, Jiang, Yunhong
><yunhong.jiang@xxxxxxxxx<mailto:yunhong.jiang@xxxxxxxxx>> wrote:
>> Is the 07:0.0 your tachyon device? The VT-d fault is suspcious.
>>
>> Yes, there is 1 quad port card is this sytem:
>>
>> 07:00.0 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 08)
>> 07:00.1 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 08)
>> 07:00.2 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 08)
>> 07:00.3 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 08)
>>
>>
>> Also is it possible to share the xen output?
>>
>> I attached the dom0 boot output. Let me know if you wanted something else.
>>
>> Also, here's the dom0 console output upon starting the VM: This
>> lockdep error
>started with the release of 2.6.32.21. Note that I'm running the same
>kernel for the domU and dom0.
>>
>> [ 1817.684097] ------------[ cut here ]------------ [ 1817.684113]
>> WARNING: at kernel/lockdep.c:2323
>trace_hardirqs_on_caller+0x12f/0x190()
>> [ 1817.684119] Hardware name: ProLiant DL380 G6 [ 1817.684122]
>> Modules linked in: xt_physdev ipv6 osa_mfgdom0 xenfs xen_gntdev
>fbcon tileblit font bitblit softcursor xen_evtchn xen_pciback radeon
>ttm drm_kms_helper tun drm i2c_algo_bit ipmi_si i2c_core
>ipmi_msghandler joydev serio_raw hpwdt hpilo bridge stp llc usbhid hid
>cciss usb_storage
>> [ 1817.684190] Pid: 11, comm: xenwatch Not tainted
>> 2.6.32.21-xenoprof-1 #1 [ 1817.684195] Call Trace:
>> [ 1817.684197]  <IRQ>  [<ffffffff810aa18f>] ?
>trace_hardirqs_on_caller+0x12f/0x190
>> [ 1817.684209]  [<ffffffff8106bed0>] warn_slowpath_common+0x80/0xd0 [
>> 1817.684217]  [<ffffffff815f2b80>] ? _spin_unlock_irq+0x30/0x40 [
>> 1817.684223]  [<ffffffff8106bf34>] warn_slowpath_null+0x14/0x20 [
>> 1817.684229]  [<ffffffff810aa18f>]
>> trace_hardirqs_on_caller+0x12f/0x190
>> [ 1817.684234]  [<ffffffff810aa1fd>] trace_hardirqs_on+0xd/0x10 [
>> 1817.684240]  [<ffffffff815f2b80>] _spin_unlock_irq+0x30/0x40 [
>> 1817.684266]  [<ffffffff813c4fc5>]
>> add_to_net_schedule_list_tail+0x85/0xd0
>> [ 1817.684271]  [<ffffffff813c6216>] netif_be_int+0x36/0x160 [
>> 1817.684278]  [<ffffffff810e10d0>] handle_IRQ_event+0x70/0x180 [
>> 1817.684284]  [<ffffffff810e36e9>] handle_edge_irq+0xc9/0x170 [
>> 1817.684291]  [<ffffffff813b8d7f>] __xen_evtchn_do_upcall+0x1bf/0x1f0
>> [ 1817.684297]  [<ffffffff813b92fd>] xen_evtchn_do_upcall+0x3d/0x60 [
>> 1817.684304]  [<ffffffff8101647e>]
>> xen_do_hypervisor_callback+0x1e/0x30
>> [ 1817.684308]  <EOI>  [<ffffffff8100940a>] ?
>> hypercall_page+0x40a/0x1010 [ 1817.684319]  [<ffffffff8100940a>] ?
>> hypercall_page+0x40a/0x1010 [ 1817.684325]  [<ffffffff813bce54>] ?
>> xb_write+0x1e4/0x290 [ 1817.684330]  [<ffffffff813bd8ca>] ?
>> xs_talkv+0x6a/0x1f0 [ 1817.684336]  [<ffffffff813bd8d8>] ?
>> xs_talkv+0x78/0x1f0 [ 1817.684341]  [<ffffffff813bdbcd>] ?
>> xs_single+0x4d/0x60 [ 1817.684346]  [<ffffffff813be502>] ?
>> xenbus_read+0x52/0x80 [ 1817.684352]  [<ffffffff813c87fc>] ?
>> frontend_changed+0x48c/0x770 [ 1817.684358]  [<ffffffff813bf76d>] ?
>> xenbus_otherend_changed+0xdd/0x1b0
>> [ 1817.684365]  [<ffffffff8101122f>] ?
>> xen_restore_fl_direct_end+0x0/0x1 [ 1817.684371]
>> [<ffffffff810ac830>] ? lock_release+0xb0/0x230 [ 1817.684376]
>> [<ffffffff813bfae0>] ? frontend_changed+0x10/0x20 [ 1817.684382]
>> [<ffffffff813bd4f5>] ? xenwatch_thread+0x55/0x160 [ 1817.684389]
>> [<ffffffff81093400>] ? autoremove_wake_function+0x0/0x40 [
>> 1817.684394]  [<ffffffff813bd4a0>] ? xenwatch_thread+0x0/0x160 [
>> 1817.684400]  [<ffffffff81093086>] ? kthread+0x96/0xb0 [ 1817.684405]
>> [<ffffffff8101632a>] ? child_rip+0xa/0x20 [ 1817.684410]
>> [<ffffffff81015c90>] ? restore_args+0x0/0x30 [ 1817.684415]
>> [<ffffffff81016320>] ? child_rip+0x0/0x20
>>
>> -Bruce
>>
>>
>>
>> Thanks
>> --jyh
>>
>> >-----Original Message-----
>> >From:
>xen-devel-bounces@xxxxxxxxxxxxxxxxxxx<mailto:xen-devel-bounces@xxxxxxxx
>nsourc
>e.com>
>> >[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx<mailto:xen-devel-bounc
>> >es@list
>s.xensource.com>] On Behalf Of Bruce Edge
>> >Sent: Tuesday, September 28, 2010 7:54 AM
>> >To: Konrad Rzeszutek Wilk
>> >Cc:
>> >xen-devel@xxxxxxxxxxxxxxxxxxx<mailto:xen-devel@xxxxxxxxxxxxxxxxxxx>
>> >Subject: Re: [Xen-devel] pv-ops domU not working with MSI interrupts
>> >on
>Nehalem
>> >
>> >On Mon, Sep 27, 2010 at 12:54 PM, Konrad Rzeszutek Wilk
>> ><konrad.wilk@xxxxxxxxxx<mailto:konrad.wilk@xxxxxxxxxx>> wrote:
>> >> On Mon, Sep 27, 2010 at 12:16:50PM -0700, Bruce Edge wrote:
>> >>> On Mon, Sep 27, 2010 at 10:24 AM, Konrad Rzeszutek Wilk
>> >>> <konrad.wilk@xxxxxxxxxx<mailto:konrad.wilk@xxxxxxxxxx>> wrote:
>> >>> >
>> >>> > On Mon, Sep 27, 2010 at 08:52:39AM -0700, Bruce Edge wrote:
>> >>> > > One of our developers who is working on a tachyon driver is
>> >>> > > complaining that the pvops domU kernel is not working for
>> >>> > > these MSI interrupts.
>> >>> > > This is using the current head of xen/2.6.32.x on both a
>> >>> > > single Nahelam 920 and a dual E5540. This behavior is
>> >>> > > consistent with Xen 4.0.1, 4.0.2.rc1-pre and 4.1.
>> >>> > >
>> >>> > > Here are his comments:
>> >>> > >
>> >>> > > - the driver has no problem to enable msi interrupt and
>> >>> > > request the interrupt through kernel functions pci_enable_msi
>> >>> > > & request_irq
>> >>> >
>> >>> > What shows up in the Xen console when you send the 'q' key?
>> >>> > Does it show that the vector is assigned to the appropiate guest?
>> >>>
>> >>> The Xen console q key shows that the domU is assigned:
>> >>>
>> >>> (XEN)     Interrupts { 32, 41-42, 47 }
>> >>
>> >> Aha!
>> >>
>> >>>
>> >>> but the domU thinks it has:
>> >>>
>> >>> 124/125/126/127
>> >>>
>> >>> Is there some mapping that's taking place, or is this plain wrong?
>> >>
>> >> That looks wrong. The IRQ numbers (even though they are MSI
>> >> vectors) are setup as IRQ numbers in the DomU guest. You should
>> >> have seen
>> >>
>> >> 32:
>> >> 41:
>> >> 42:
>> >> 47:
>> >> in you /proc/interrupts on your DomU guest.
>> >>
>> >> I wonder what broke  - can you use
>> >git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git<http://
>> >git.kernel.org
>/pub/scm/linux/kernel/git/konrad/xen.git>
>> >> devel/xen-pcifront-0.5 (or pv/pcifront-2.6.32)?
>> >
>> >Please forgive the git ignorance.
>> >
>> >Is this the right syntax?
>> >
>> >git clone
>git://git.kernel.org/pub/scm/linux/kernel/git/konrad:pv/pcifront-2.6.32
><http://git.ke
>rnel.org/pub/scm/linux/kernel/git/konrad:pv/pcifront-2.6.32>
>> >linux-2.6.32-pv-pcifront
>> >
>> >Initialized empty Git repository in
>> >/import/kaan/bedge/src/xen/kernel/pv-ops/linux-2.6.32-pv-pcifront/.g
>> >it/
>> >fatal: The remote end hung up unexpectedly
>> >
>> >Or:
>> >
>> > git clone
>git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git<http://git
>.kernel.org/p ub/scm/linux/kernel/git/konrad/xen.git>
>> >
>> >Initialized empty Git repository in
>> >/import/kaan/bedge/src/xen/kernel/pv-ops/xen/.git/
>> >remote: error: Could not read
>> >59eab2f8f04147c5aadc99f2034ca7e5b81e890f
>> >remote: fatal: Failed to traverse parents of commit
>> >979e121cb348add17ed8171bf447b27a3a9d1be3
>> >remote: aborting due to possible repository corruption on the remote side.
>> >fatal: early EOF
>> >fatal: index-pack failed
>> >
>> >>
>> >> It has the latest pcifront driver but without the PVonHVM
>> >> enhancments so we can try to eliminate the PvONHVM logic out of the 
>> >> picture.
>> >>
>> >>>
>> >>> >
>> >>> > > - the interrupt does happen. But the interrupt service
>> >>> > > routine of tachyon driver doesn't detect any interrupt status
>> >>> > > related to this interrupt, which inhibits the tachyon chip
>> >>> > > from coming on-line. And there are high count of tachyon
>> >>> > > interrupt in /proc/interrupts
>> >>> >
>> >>> > Is it checking the PCI_STATUS_INTERRUPT or the appropiate
>> >>> > register in the MMIO BAR?
>> >>> >
>> >>>
>> >>> The driver would check the appropriate register (tachyon
>> >>> registers) in the MMIO to determine the source of interrupts.
>> >>
>> >> OK, so that isn't it. Is there anything at these vectors:
>> >> 7c, 7d, 7e, and 7f? When you use xen debug-keys 'i' or 'q' it
>> >> should give you an inkling what device this is set for.
>> >
>> >When I run a distro kernel in hvm mode, I get the expected irq mappings:
>> >
>> >'i' - Note 66 - 69
>> >(XEN)    IRQ:  66 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:3a
>> >type=PCI-MSI         status=00000010 in-flight=0
>> >domain-list=10:127(----),
>> >(XEN)    IRQ:  67 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:42
>> >type=PCI-MSI         status=00000010 in-flight=0
>> >domain-list=10:126(----),
>> >(XEN)    IRQ:  68 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:4a
>> >type=PCI-MSI         status=00000010 in-flight=0
>> >domain-list=10:125(----),
>> >(XEN)    IRQ:  69 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:52
>> >type=PCI-MSI         status=00000010 in-flight=0
>> >domain-list=10:124(----)
>> >
>> >
>> >'q'
>> >(XEN)     Interrupts { 32, 41-42, 47, 124-127 }
>> >
>> >
>> >The same data with pv-ops kernel shows:
>> >
>> >'i'
>> >IRQ numbers stop at 65, no 66 - 69 present:
>> >
>> >(XEN)    IRQ:  63 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:91
>> >type=PCI-MSI         status=00000010 in-flight=0
>> >domain-list=0:289(----),
>> >(XEN)    IRQ:  64 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:99
>> >type=PCI-MSI         status=00000002 mapped, unbound
>> >(XEN)    IRQ:  65 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:b1
>> >type=PCI-MSI         status=00000010 in-flight=0
>> >domain-list=0:287(----),
>> >(XEN) IO-APIC interrupt information:
>> >
>> >'q'
>> >(XEN)     Interrupts { 32, 41-42, 47 }
>> >
>> >>
>> >>>
>> >>> > >
>> >>> > > kaan-18-dpm:~# cat /proc/interrupts | grep TACH
>> >>> > >
>> >124:     760415          0          0          0          0
>> >    0
>> >>> > >          0          0          0          0          0
>> >      0
>> >>> > >     0          0  xen-pirq-pcifront-msi  HW_TACHYON
>> >>> > >
>> >125:     762234          0          0          0          0
>> >    0
>> >>> > >          0          0          0          0          0
>> >      0
>> >>> > >     0          0  xen-pirq-pcifront-msi  HW_TACHYON
>> >>> > >
>> >126:     764180          0          0          0          0
>> >    0
>> >>> > >          0          0          0          0          0
>> >      0
>> >>> > >     0          0  xen-pirq-pcifront-msi  HW_TACHYON
>> >>> > >
>> >127:     764164          0          0          0          0
>> >    0
>> >>> > >          0          0          0          0          0
>> >      0
>> >>> > >     0          0  xen-pirq-pcifront-msi  HW_TACHYON
>> >>> >
>> >>> > Can you provide the full dmesg output?
>> >>>
>> >>> Attached.
>> >>>
>> >>> Some possibly related messages on dom0 console:
>> >>>
>> >>> [ 1882.269778] pciback 0000:07:00.0: enabling device (0000 ->
>> >>> 0003) [ 1882.269800] xen: registering gsi 32 triggering 0
>> >>> polarity 1 [ 1882.269827] xen_allocate_pirq: returning irq 32 for
>> >>> gsi 32 [ 1882.269834] xen: --> irq=32 [ 1882.269841] Already
>> >>> setup the GSI :32 [ 1882.269847] pciback 0000:07:00.0: PCI INT A
>> >>> -> GSI 32 (level, low) -> IRQ 32 [ 1882.269866] pciback
>> >>> 0000:07:00.0: setting latency timer to 64 [ 1882.270463] pciback
>> >>> 0000:07:00.0: Driver tried to write to a read-only configuration
>> >>> space field at offset 0x62, size 2. This may be harmless, but if
>> >>> you have problems with your device:
>> >>
>> >> Uhhh, for that I think you need to do 'lspci -vvv -xxx -s 07:00.00'
>> >> to find out what is at the configuration space. You could enable
>> >> it using the permissive attribute.
>> >>
>> >>> [ 1882.270465] 1) see permissive attribute in sysfs [
>> >>> 1882.270467] 2) report problems to the xen-devel mailing list
>> >>> along with details of your device obtained from lspci.
>> >>> [ 1882.270615]   alloc irq_desc for 478 on node 0
>> >>> [ 1882.270625]   alloc kstat_irqs on node 0
>> >>
>> >> So for 478: what do you see? xen-pciback I presume?
>> >>> [ 1882.348411] pciback 0000:07:00.1: enabling device (0000 ->
>> >>> 0003) [ 1882.348433] xen: registering gsi 42 triggering 0
>> >>> polarity 1 [ 1882.348440] xen_allocate_pirq: returning irq 42 for
>> >>> gsi 42 [ 1882.348445] xen: --> irq=42 [ 1882.348472] Already
>> >>> setup the GSI :42 [ 1882.348479] pciback 0000:07:00.1: PCI INT B
>> >>> -> GSI 42 (level, low) -> IRQ 42 [ 1882.348497] pciback
>> >>> 0000:07:00.1: setting latency timer to 64 [ 1882.349063] pciback
>> >>> 0000:07:00.1: Driver tried to write to a read-only configuration
>> >>> space field at offset 0x62, size 2. This may be harmless, but if
>> >>> you have problems with your device:
>> >>> [ 1882.349066] 1) see permissive attribute in sysfs [
>> >>> 1882.349067] 2) report problems to the xen-devel mailing list
>> >>> along with details of your device obtained from lspci.
>> >>> [ 1882.349205]   alloc irq_desc for 477 on node 0
>> >>> [ 1882.349215]   alloc kstat_irqs on node 0
>> >>> [ 1882.402893] pciback 0000:07:00.2: enabling device (0000 ->
>> >>> 0003) [ 1882.402908] xen: registering gsi 47 triggering 0
>> >>> polarity 1 [ 1882.402913] xen_allocate_pirq: returning irq 47 for
>> >>> gsi 47 [ 1882.402916] xen: --> irq=47 [ 1882.402921] Already
>> >>> setup the GSI :47 [ 1882.402925] pciback 0000:07:00.2: PCI INT C
>> >>> -> GSI 47 (level, low) -> IRQ 47 [ 1882.402938] pciback
>> >>> 0000:07:00.2: setting latency timer to 64 [ 1882.403280] pciback
>> >>> 0000:07:00.2: Driver tried to write to a read-only configuration
>> >>> space field at offset 0x62, size 2. This may be harmless, but if
>> >>> you have problems with your device:
>> >>> [ 1882.403282] 1) see permissive attribute in sysfs [
>> >>> 1882.403282] 2) report problems to the xen-devel mailing list
>> >>> along with details of your device obtained from lspci.
>> >>> [ 1882.403380]   alloc irq_desc for 476 on node 0
>> >>> [ 1882.403386]   alloc kstat_irqs on node 0
>> >>> (XEN) [VT-D]iommu.c:824: iommu_fault_status: Primary Pending
>> >>> Fault
>> >>> (XEN) [VT-D]iommu.c:799: DMAR:[DMA Write] Request device
>> >>> [07:00.0] fault addr e6f80000, iommu reg = ffff82c3fff57000
>> >>> (XEN) DMAR:[fault reason 05h] PTE Write access is not set
>> >>> (XEN) print_vtd_entries: iommu = ffff83019fffa370 bdf = 7:0.0 gmfn = 
>> >>> e6f80
>> >>> (XEN)     root_entry = ffff83019ff70000
>> >>> (XEN)     root_entry[7] = 19cf52001
>> >>> (XEN)     context = ffff83019cf52000
>> >>> (XEN)     context[0] = 102_706dc005
>> >>> (XEN)     l4 = ffff8300706dc000
>> >>> (XEN)     l4_index = 0
>> >>> (XEN)     l4[0] = 706db003
>> >>> (XEN)     l3 = ffff8300706db000
>> >>> (XEN)     l3_index = 3
>> >>> (XEN)     l3[3] = 702b6003
>> >>> (XEN)     l2 = ffff8300702b6000
>> >>> (XEN)     l2_index = 137
>> >>> (XEN)     l2[137] = 0
>> >>> (XEN)     l2[137] not present
>> >>> (XEN) traps.c:466:d0 Unhandled nmi fault/trap [#2] on VCPU 0
>> >>> [ec=0000]
>> >>
>> >> That is not good. What changed from your earlier emails that this
>> >> was
>triggered?
>> >
>> >Nothing
>> >> Or was it triggered all along?
>> >
>> >Yes, I just included it for completeness
>> >
>> >> What happens if you run the system without the iommu enabled?
>> >
>> >Haven't tried yet. Will check that next.
>> >
>> >-Bruce
>> >
>> >_______________________________________________
>> >Xen-devel mailing list
>> >Xen-devel@xxxxxxxxxxxxxxxxxxx<mailto:Xen-devel@xxxxxxxxxxxxxxxxxxx>
>> >http://lists.xensource.com/xen-devel
>>
>>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.