[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-devel] Freeze with 2.6.32.19 and xen-4.0.1rc5
- To: Claus Rosenberger <claus.rosenberger@xxxxxxxxx>
- From: Bruce Edge <bruce.edge@xxxxxxxxx>
- Date: Sat, 21 Aug 2010 16:04:31 -0700
- Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
- Delivery-date: Sat, 21 Aug 2010 16:05:46 -0700
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=YkvMeN/lMMLNVnEGKCxMjcLfC9x9Zxz1OHUKIwHUkS9Flsldbwn2RRa3SvRhKNHB6D 1pPwLM/3pzHCVvf0YCOy0rS8rMbLn+Ttgyx3LvTcDEIsHYkhnP9tBL9jJExOTRO9yu74 8JMG0gNu9UrdNF6avKilS3t3BYSYn7eRJAwYE=
- List-id: Xen developer discussion <xen-devel.lists.xensource.com>
Look for the thread titled:domU and dom0 hung with Xen console interrupt binding showing in-flight=1
there's a patch from Kier in there that fixed a periodic hang that we was experiencing.
If you have a serial console and can use the Ctrl-A x 3 trick to get a Xen console a look at the interrupts, the "(---M)" string is the indicator that it's possibly the same problem.
-Bruce
On Sat, Aug 21, 2010 at 6:47 AM, Claus Rosenberger <claus.rosenberger@xxxxxxxxx> wrote:
Hi,
i have big trouble with a Debian Lenny dom0 and latest kernel 2.6.32.19
with xen-4.0.1rc5. Due some reason the system freezes from time to time.
I used kernel 2.6.31.9 with xen-3.4.2 before. The machine doesn't write
anything to serial console so there are no errors or something like that.
Perhaps there is something to see from the logs ...
Hardware
Board: Intel DQ45CB
CPU: Pentium(R) Dual-Core CPU E6500 @ 2.93GHz
Memory: AENEON/Qimonda 4 x 2GB 800Mhz
Disks: WDC 1TB (2x) as software raid-1
Configuration Grub
title Xen 4.0-amd64 / Debian GNU/Linux, kernel 2.6.32.19
root (hd0,0)
kernel /boot/xen-4.0-amd64.gz dom0_mem=524288 cpufreq=xen
cpuidle console=com1 com1=115200,8n1,0xf1c0,0 sync_console
module /boot/vmlinuz-2.6.32.19 root=/dev/md0 ro console=tty0
console=hvc0
module /boot/initrd.img-2.6.32.19
Console output while starting
(XEN) Xen version 4.0.1-rc5 (Debian 4.0.1~rc5-1) (waldi@xxxxxxxxxx) (gcc
version 4.3.2 (Debian 4.3.2-1.1) ) Sat Aug 14 21:41:28 CEST 2010
(XEN) Console output is synchronous.
(XEN) Command line: dom0_mem=524288 cpufreq=xen cpuidle console=com1
com1=115200,8n1,0xf1c0,0 sync_console
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cbb77000 (usable)
(XEN) 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
(XEN) 00000000cbbfa000 - 00000000cbd28000 (reserved)
(XEN) 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
(XEN) 00000000cbd3c000 - 00000000cbe43000 (reserved)
(XEN) 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
(XEN) 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
(XEN) 00000000cbe66000 - 00000000cbe88000 (reserved)
(XEN) 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
(XEN) 00000000cbe8e000 - 00000000cc000000 (usable)
(XEN) 00000000cdc00000 - 00000000d0000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000022c000000 (usable)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
(XEN) ACPI: XSDT CBE49E18, 0064 (r1 INTEL DQ45CB 7B MSFT 10013)
(XEN) ACPI: FACP CBE48D98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013)
(XEN) ACPI: DSDT CBE43018, 4B53 (r1 INTEL DQ45CB 7B INTL 20051117)
(XEN) ACPI: FACS CBE51F40, 0040
(XEN) ACPI: APIC CBE48F18, 006C (r2 INTEL DQ45CB 7B MSFT 10013)
(XEN) ACPI: MCFG CBE53E18, 003C (r1 INTEL DQ45CB 7B MSFT 97)
(XEN) ACPI: ASF! CBE52D18, 00A0 (r32 INTEL DQ45CB 7B TFSM F4240)
(XEN) ACPI: HPET CBE53D98, 0038 (r1 INTEL DQ45CB 7B AMI. 3)
(XEN) ACPI: SPCR CBE53D18, 0050 (r1 INTEL DQ45CB 7B AMI. 3)
(XEN) ACPI: TCPA CBE53C98, 0032 (r2 INTEL DQ45CB 7B MSFT 1000013)
(XEN) ACPI: DMAR CBBF9D98, 0108 (r1 INTEL DQ45CB 7B INTL 1)
(XEN) System RAM: 8060MB (8253980kB)
(XEN) Domain heap initialised
(XEN) ACPI: 32/64X FACS address mismatch in FADT -
cbe4cf40/00000000cbe51f40, using 32
(XEN) Processor #0 7:7 APIC version 20
(XEN) Processor #1 7:7 APIC version 20
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2933.515 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation not supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) Brought up 2 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16a1000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000220000000->0000000224000000 (114688 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff816a1000
(XEN) Init. ramdisk: ffffffff816a1000->ffffffff82de2e00
(XEN) Phys-Mach map: ffffffff82de3000->ffffffff82ee3000
(XEN) Start info: ffffffff82ee3000->ffffffff82ee34b4
(XEN) Page tables: ffffffff82ee4000->ffffffff82eff000
(XEN) Boot stack: ffffffff82eff000->ffffffff82f00000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff814f3200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM:
..........................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 180kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.19 (root@jupiter) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Mon Aug 16 15:43:54 CEST 2010
[ 0.000000] Command line: root=/dev/md0 ro console=tty0 console=hvc0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] Xen: 000000000009ec00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 00000000cbb77000 - 00000000cbbfa000 (ACPI NVS)
[ 0.000000] Xen: 00000000cbbfa000 - 00000000cbd28000 (reserved)
[ 0.000000] Xen: 00000000cbd28000 - 00000000cbd3c000 (ACPI NVS)
[ 0.000000] Xen: 00000000cbd3c000 - 00000000cbe43000 (reserved)
[ 0.000000] Xen: 00000000cbe43000 - 00000000cbe4b000 (ACPI data)
[ 0.000000] Xen: 00000000cbe4b000 - 00000000cbe66000 (ACPI NVS)
[ 0.000000] Xen: 00000000cbe66000 - 00000000cbe88000 (reserved)
[ 0.000000] Xen: 00000000cbe88000 - 00000000cbe8e000 (ACPI NVS)
[ 0.000000] Xen: 00000000cdc00000 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] RAMDISK: 016a1000 - 02de2e00
[ 0.000000] ACPI: RSDP 00000000000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000cbe49e18 00064 (v01 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cbe48d98 000F4 (v04 INTEL A M I
06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20090903/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
CBE4CF40/00000000CBE51F40, using 32 (20090903/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000cbe43018 04B53 (v01 INTEL DQ45CB
0000007B INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cbe4cf40 00040
[ 0.000000] ACPI: APIC 00000000cbe48f18 0006C (v02 INTEL DQ45CB
0000007B MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000cbe53e18 0003C (v01 INTEL DQ45CB
0000007B MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000cbe52d18 000A0 (v32 INTEL DQ45CB
0000007B TFSM 000F4240)
[ 0.000000] ACPI: HPET 00000000cbe53d98 00038 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: SPCR 00000000cbe53d18 00050 (v01 INTEL DQ45CB
0000007B AMI. 00000003)
[ 0.000000] ACPI: TCPA 00000000cbe53c98 00032 (v02 INTEL DQ45CB
0000007B MSFT 01000013)
[ 0.000000] ACPI: 00000000cbbf9d98 00108 (v01 INTEL DQ45CB
0000007B INTL 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000020000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000020000000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000013fff] pages 4
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0002ee4000 - 0002eff000] XEN PAGETABLES ==>
[0002ee4000 - 0002eff000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001680514] TEXT DATA BSS ==>
[0001000000 - 0001680514]
[ 0.000000] #4 [00016a1000 - 0002de2e00] RAMDISK ==>
[00016a1000 - 0002de2e00]
[ 0.000000] #5 [0002de3000 - 0002ee4000] XEN START INFO ==>
[0002de3000 - 0002ee4000]
[ 0.000000] #6 [0001681000 - 00016811a8] BRK ==>
[0001681000 - 00016811a8]
[ 0.000000] #7 [0000100000 - 00001e4000] PGTABLE ==>
[0000100000 - 00001e4000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:abb77000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1-rc5 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880002f35000 s90008
r8192 d20584 u118784
[ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 128951
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/md0 ro console=tty0
console=hvc0
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between
ffff880003a06000 - ffff880007a06000
[ 0.000000] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
[ 0.000000] xen_swiotlb_fixup: buf=ffff880003a06000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ffff880007a66000 size=32768
[ 0.000000] Memory: 417688k/524288k available (3115k kernel code,
392k absent, 106208k reserved, 1859k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:768
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c
polarity=1
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2933.514 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5867.02 BogoMIPS (lpj=11734056)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004077] Dentry cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.007323] Inode-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.008000] Mount-cache hash table entries: 256
[ 0.008122] Initializing cgroup subsys ns
[ 0.010973] Initializing cgroup subsys cpuacct
[ 0.012000] Initializing cgroup subsys devices
[ 0.012000] Initializing cgroup subsys freezer
[ 0.012000] Initializing cgroup subsys net_cls
[ 0.012021] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.015384] CPU: L2 cache: 2048K
[ 0.016005] CPU 0/0x0 -> Node 0
[ 0.017322] CPU: Physical Processor ID: 0
[ 0.018994] CPU: Processor Core ID: 0
[ 0.020004] mce: CPU supports 6 MCE banks
[ 0.021735] Performance Events: unsupported p6 CPU model 23 no PMU
driver, software events only.
[ 0.024001] SMP alternatives: switching to UP code
[ 0.028001] ACPI: Core revision 20090903
[ 0.036233] installing Xen timer for CPU 1
[ 0.038038] SMP alternatives: switching to SMP code
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 1/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.040102] Brought up 2 CPUs
[ 0.044036] devtmpfs: initialized
[ 0.047638] Grant table initialized
[ 0.047638] regulator: core version 0.5
[ 0.048036] NET: Registered protocol family 16
[ 0.049983] ACPI: bus type pci registered
[ 0.052066] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.055071] PCI: Not using MMCONFIG.
[ 0.056001] PCI: Using configuration type 1 for base access
[ 0.056338] bio: create slab <bio-0> at 0
[ 0.058266] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.062347] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.067833] ACPI: BIOS _OSI(Linux) query ignored
[ 0.069997] ACPI: Interpreter enabled
[ 0.071524] ACPI: (supports S0 S3 S4 S5)
[ 0.072001] ACPI: Using IOAPIC for interrupt routing
[ 0.072136] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 127
[ 0.075207] PCI: MCFG area at f0000000 reserved in ACPI motherboard
resources
[ 0.096901] PCI: Using MMCONFIG at f0000000 - f7ffffff
[ 0.106375] ACPI Warning: Incorrect checksum in table [ ] - 6C,
should be B0 (20090903/tbutils-314)
[ 0.108123] ACPI: No dock devices found.
[ 0.110070] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.112246] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.114867] pci 0000:00:03.0: PME# disabled
[ 0.116001] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.116001] pci 0000:00:19.0: PME# disabled
[ 0.116172] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.118848] pci 0000:00:1a.7: PME# disabled
[ 0.120001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.120001] pci 0000:00:1d.7: PME# disabled
[ 0.120330] pci 0000:00:1e.0: transparent bridge
[ 0.134376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.136067] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.139137] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.140066] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.143099] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12
14 15)
[ 0.144066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.147627] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0
[ 0.148066] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.151130] xen_balloon: Initialising balloon driver with page order 0.
[ 0.152001] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.152001] vgaarb: loaded
[ 0.152037] PCI: Using ACPI for IRQ routing
[ 0.154000] Switching to clocksource xen
[ 0.155719] pnp: PnP ACPI init
[ 0.155719] ACPI: bus type pnp registered
[ 0.157935] xen_allocate_pirq: returning irq 4 for gsi 4
[ 0.160397] xen_allocate_pirq: returning irq 8 for gsi 8
[ 0.162801] xen_allocate_pirq: returning irq 13 for gsi 13
[ 0.166148] pnp: PnP ACPI: found 11 devices
[ 0.169280] ACPI: ACPI bus type pnp unregistered
[ 0.172005] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.175004] system 00:01: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.175998] system 00:01: iomem range 0xf0000000-0xf7ffffff has been
reserved
[ 0.181522] system 00:02: ioport range 0xa20-0xa3f has been reserved
[ 0.184175] system 00:02: ioport range 0xa00-0xa1f has been reserved
[ 0.185514] system 00:02: ioport range 0xb78-0xb7f has been reserved
[ 0.185514] system 00:02: ioport range 0xf78-0xf7f has been reserved
[ 0.194410] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.197653] system 00:09: ioport range 0x400-0x47f has been reserved
[ 0.200838] system 00:09: ioport range 0x1180-0x119f has been reserved
[ 0.201644] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.201644] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.201644] system 00:09: iomem range 0xfec00000-0xfecfffff could not
be reserved
[ 0.201644] system 00:09: iomem range 0xfee00000-0xfee0ffff could not
be reserved
[ 0.201644] system 00:09: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.201644] system 00:09: iomem range 0xfed45000-0xfed9ffff has been
reserved
[ 0.201644] system 00:09: iomem range 0xff000000-0xffffffff has been
reserved
[ 0.233094] PM-Timer failed consistency check (0x0xffffff) - aborting.
[ 0.235880] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.236003] pci 0000:00:1e.0: IO window: disabled
[ 0.236003] pci 0000:00:1e.0: MEM window: disabled
[ 0.236003] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.247720] NET: Registered protocol family 2
[ 0.251172] IP route cache hash table entries: 4096 (order: 3, 32768
bytes)
[ 0.254387] TCP established hash table entries: 16384 (order: 6,
262144 bytes)
[ 0.258438] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.261801] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.262417] TCP reno registered
[ 0.262417] NET: Registered protocol family 1
[ 1.868021] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.468022] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 3.471192] Unpacking initramfs...
[ 3.498686] Freeing initrd memory: 23815k freed
[ 3.509374] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.512015] DMA: Placing 64MB software IO TLB between
ffff880003a06000 - ffff880007a06000
[ 3.512015] DMA: software IO TLB at phys 0x3a06000 - 0x7a06000
[ 3.520579] audit: initializing netlink socket (disabled)
[ 3.522922] type=2000 audit(1282401524.555:1): initialized
[ 3.526164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.530194] VFS: Disk quotas dquot_6.5.2
[ 3.532304] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.535103] msgmni has been set to 862
[ 3.538435] alg: No test for stdrng (krng)
[ 3.540660] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 3.544100] io scheduler noop registered
[ 3.544617] io scheduler anticipatory registered
[ 3.544617] io scheduler deadline registered
[ 3.550889] io scheduler cfq registered (default)
[ 3.556697] registering netback
[ 3.560605] hpet_acpi_add: no address or irqs in _CRS
[ 3.562791] Linux agpgart interface v0.103
[ 3.564558] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 3.569724] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
(XEN) mm.c:860:d0 Error getting mfn 20000 (pfn 5555555555555555) from L1
entry 8000000020000473 for l1e_owner=0, pg_owner=32753
[ 3.594370] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.597333] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.601260] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.604085] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.607665] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.610749] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 3.614068] PNP: No PS/2 controller found. Probing ports directly.
[ 3.621724] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.623845] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.626065] mice: PS/2 mouse device common for all mice
[ 3.628369] rtc_cmos 00:05: RTC can wake from S4
[ 3.630391] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.633407] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 3.636446] cpuidle: using governor ladder
[ 3.638160] cpuidle: using governor menu
[ 3.640435] No iBFT detected.
[ 3.640435] TCP cubic registered
[ 3.644730] NET: Registered protocol family 10
[ 3.648048] lo: Disabled Privacy Extensions
[ 3.650007] Mobile IPv6
[ 3.651066] NET: Registered protocol family 17
[ 3.653027] registered taskstats version 1
[ 3.656447] rtc_cmos 00:05: setting system clock to 2010-08-21
14:38:44 UTC (1282401524)
[ 3.661024] Initalizing network drop monitor service
[ 3.663301] Freeing unused kernel memory: 592k freed
[ 3.666114] Write protecting the kernel read-only data: 4252k
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [ 3.972359] SCSI subsystem
initialized
[ 3.987383] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.989008] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.992753] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 4.007303] usbcore: registered new interface driver usbfs
[ 4.009005] usbcore: registered new interface driver hub
[ 4.036723] usbcore: registered new device driver usb
[ 4.043306] 0000:00:19.0: 0000:00:19.0: PHY reset is blocked due to
SOL/IDER session.
[ 4.129379] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.133854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.136608] Warning! ehci_hcd should always be loaded before uhci_hcd
and ohci_hcd, not after
[ 4.328064] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:1c:c0:7e:5d:23
[ 4.332251] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.337295] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff
[ 4.340020] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 4.341007] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.346435] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 4.352867] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 4.355972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.358863] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.363261] usb usb1: Product: UHCI Host Controller
[ 4.363261] usb usb1: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.363261] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.375770] usb usb1: configuration #1 chosen from 1 choice
[ 4.379219] hub 1-0:1.0: USB hub found
[ 4.380849] hub 1-0:1.0: 2 ports detected
[ 4.383186] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.386787] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.387075] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 2
[ 4.394149] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.405343] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0522000
[ 4.421028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.423479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.425015] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.425015] usb usb2: Product: EHCI Host Controller
[ 4.425015] usb usb2: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.425015] usb usb2: SerialNumber: 0000:00:1a.7
[ 4.438580] usb usb2: configuration #1 chosen from 1 choice
[ 4.442268] hub 2-0:1.0: USB hub found
[ 4.443847] hub 2-0:1.0: 6 ports detected
[ 4.445702] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.448745] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.449657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 3
[ 4.456263] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
[ 4.459221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.463195] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.463195] usb usb3: Product: UHCI Host Controller
[ 4.463195] usb usb3: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.463195] usb usb3: SerialNumber: 0000:00:1a.1
[ 4.474960] usb usb3: configuration #1 chosen from 1 choice
[ 4.477318] hub 3-0:1.0: USB hub found
[ 4.479372] hub 3-0:1.0: 2 ports detected
[ 4.481215] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.485177] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.485177] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 4
[ 4.492307] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.498408] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0521000
[ 4.516022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.518471] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.520005] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.520005] usb usb4: Product: EHCI Host Controller
[ 4.520005] usb usb4: Manufacturer: Linux 2.6.32.19 ehci_hcd
[ 4.520005] usb usb4: SerialNumber: 0000:00:1d.7
[ 4.533521] usb usb4: configuration #1 chosen from 1 choice
[ 4.536109] hub 4-0:1.0: USB hub found
[ 4.538858] hub 4-0:1.0: 6 ports detected
[ 4.540863] xen_allocate_pirq: returning irq 18 for gsi 18
[ 4.543219] Already setup the GSI :18
[ 4.544822] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.547215] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.547215] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 4.555876] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
[ 4.558604] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.562227] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.562741] usb usb5: Product: UHCI Host Controller
[ 4.562741] usb usb5: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.562741] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.574461] usb usb5: configuration #1 chosen from 1 choice
[ 4.583596] hub 5-0:1.0: USB hub found
[ 4.585254] hub 5-0:1.0: 2 ports detected
[ 4.590096] xen_allocate_pirq: returning irq 23 for gsi 23
[ 4.593905] Already setup the GSI :23
[ 4.596050] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.597901] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.597901] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 4.605300] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 4.608381] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.609260] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.609260] usb usb6: Product: UHCI Host Controller
[ 4.609260] usb usb6: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.609260] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.622973] usb usb6: configuration #1 chosen from 1 choice
[ 4.625266] hub 6-0:1.0: USB hub found
[ 4.627949] hub 6-0:1.0: 2 ports detected
[ 4.629769] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.632827] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.636133] scsi0 : ata_piix
[ 4.637938] scsi1 : ata_piix
[ 4.640604] ata1: SATA max UDMA/133 cmd 0xf1b0 ctl 0xf1a0 bmdma
0xf170 irq 19
[ 4.641887] ata2: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma
0xf178 irq 19
[ 4.648389] xen_allocate_pirq: returning irq 19 for gsi 19
[ 4.651217] Already setup the GSI :19
[ 4.654481] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.657412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.659750] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 4.664386] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 4.666901] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.669782] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.670874] usb usb7: Product: UHCI Host Controller
[ 4.670874] usb usb7: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.670874] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.681347] usb usb7: configuration #1 chosen from 1 choice
[ 4.684158] hub 7-0:1.0: USB hub found
[ 4.686950] hub 7-0:1.0: 2 ports detected
[ 4.688855] xen_allocate_pirq: returning irq 19 for gsi 19
[ 4.691239] Already setup the GSI :19
[ 4.692822] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.695235] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.700261] scsi2 : ata_piix
[ 4.701808] scsi3 : ata_piix
[ 4.703083] ata3: SATA max UDMA/133 cmd 0xf150 ctl 0xf140 bmdma
0xf110 irq 19
[ 4.705760] ata4: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma
0xf118 irq 19
[ 4.709623] xen_allocate_pirq: returning irq 18 for gsi 18
[ 4.712543] Already setup the GSI :18
[ 4.713590] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.713590] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.713590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 4.724620] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020
[ 4.727127] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.731098] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.731098] usb usb8: Product: UHCI Host Controller
[ 4.731098] usb usb8: Manufacturer: Linux 2.6.32.19 uhci_hcd
[ 4.731098] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.743158] usb usb8: configuration #1 chosen from 1 choice
[ 4.746102] hub 8-0:1.0: USB hub found
[ 4.747693] hub 8-0:1.0: 2 ports detected
[ 5.032006] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.045534] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.448132] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.450866] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 5.453423] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.456100] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 5.460786] ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.463692] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.468660] ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
[ 5.472444] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.476816] ata1.00: configured for UDMA/133
[ 5.478736] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.486181] ata2.00: configured for UDMA/133
[ 5.488538] scsi 1:0:0:0: Direct-Access ATA WDC WD1002FBYS-0
03.0 PQ: 0 ANSI: 5
[ 5.541659] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.541856] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 5.541913] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.541944] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.542095] sdb:
[ 5.557518] sd 0:0:0:0: [sda] Write Protect is off
[ 5.560217] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.564739] sda: sdb1 sdb2 sdb3
[ 5.569668] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.581752] sda1 sda2 sda3
[ 5.583736] sd 0:0:0:0: [sda] Attached SCSI disk
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top
... Begin: Loading[ 5.802092] md: raid1 personality registered for
level 1
Success: loaded module raid1.
done.
Begin: Assembling all MD arrays ... [ 5.818270] md: md0 stopped.
[ 5.835463] md: bind<sdb1>
[ 5.836855] md: bind<sda1>
[ 5.844695] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.847222] md0: detected capacity change from 0 to 1998585856
mdadm: /dev/md0 has been started with 2 drives.
[ 5.853914] md: md1 stopped.
[ 5.855767] md0: unknown partition table
[ 5.930396] md: bind<sdb2>
[ 5.931826] md: bind<sda2>
[ 5.940841] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.943400] md1: detected capacity change from 0 to 17190748160
mdadm: /dev/md1 has been started with 2 drives.
[ 5.950992] md: md2 stopped.
[ 5.952353] md1: unknown partition table
[ 6.001220] md: bind<sdb3>
[ 6.002725] md: bind<sda3>
[ 6.010482] raid1: md2 is not clean -- starting background reconstruction
[ 6.014473] raid1: raid set md2 active with 2 out of 2 mirrors
[ 6.017005] md2: detected capacity change from 0 to 981012578304
mdadm: /dev/md2 has been started with 2 drives.
[ 6.022926] md2: unknown partition table
Success: assembled all arrays.
done.
Begin: Waiting for udev to process events ... done.
[ 6.094176] device-mapper: uevent: version 1.0.3
[ 6.097386] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@xxxxxxxxxx
done.
Begin: Running /scripts/local-premount ... done.
[ 6.144313] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.147116] EXT3-fs: write access will be enabled during recovery.
[ 6.266634] kjournald starting. Commit interval 5 seconds
[ 6.269039] EXT3-fs: recovery complete.
[ 6.271603] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 7.188746] udevd
version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 7.826508] input: Sleep
Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 7.828020] ACPI: Sleep Button [SLPB]
[ 7.836073] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.839684] ACPI: Power Button [PWRB]
[ 7.913777] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.932125] xen_allocate_pirq: returning irq 18 for gsi 18
[ 7.934459] Already setup the GSI :18
[ 7.936031] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 7.940447] ACPI: SSDT 00000000cbe4cc18 002CC (v01 AMI IST
00000001 MSFT 03000001)
[ 7.946355] Marking TSC unstable due to TSC halts in idle
[ 7.948697] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 7.951686] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.952663] ACPI: Power Button [PWRF]
[ 7.992562] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 3
[ 7.996488] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 4
[ 8.085694] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 5
[ 8.135080] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
[ 8.161776] Error: Driver 'pcspkr' is already registered, aborting...
(XEN) no cpu_id for acpi_id 6
[ 8.186681] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 7
[ 8.246343] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
(XEN) no cpu_id for acpi_id 8
[ 8.278251] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3])
done.
RAID status not OK. Exiting. failed!
Setting the system clock.
Activating swap...done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/md0: clean, 36618/122160 files, 254589/487936 blocks
done.
[ 10.433319] EXT3 FS on md0, internal journal
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...[ 11.343159] loop: module loaded
done.
Generating udev events for MD arrays...done.
Setting up LVM Volume Groups Reading all physical volumes. This may
take a while...
Found volume group "vgrp1" using metadata type lvm2
36 logical volume(s) in volume group "vgrp1" now active
.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
/dev/md1: recovering journal
/dev/md1: clean, 1999/1050576 files, 162111/4196960 blocks
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...[ 13.112515] kjournald starting. Commit
interval 5 seconds
[ 13.120490] EXT3 FS on md1, internal journal
[ 13.122256] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.317719] md: resync of RAID array md2
[ 13.319320] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 13.321475] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for resync.
[ 13.321475] md: using 128k window, over a total of 958020096 blocks.
[ 13.440405] kjournald starting. Commit interval 5 seconds
[ 13.508352] EXT3 FS on dm-25, internal journal
[ 13.510329] EXT3-fs: recovery complete.
[ 13.512505] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...[ 13.572921] Adding 2097144k swap on
/dev/mapper/vgrp1-orion.swap. Priority:-1 extents:1 across:2097144k
done.
Setting up networking....
Configuring network interfaces...Don't seem to be have all the variables
for eth0.100/inet.
Failed to bring up eth0.100.
Don't seem to be have all the variables for eth0.200/inet.
Failed to bring up eth0.200.
[ 14.171235] Bridge firewalling registered
WARNING: Could not open /proc/net/vlan/config. Maybe you need to load
the 8021q module, or maybe you are not using PROCFS??
[ 14.230673] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
[ 14.232010] All bugs added by David S. Miller <davem@xxxxxxxxxx>
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[ 14.332471] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.336567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 14.342030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Added VLAN with VID == 100 to IF -:eth0:-
[ 14.352613] device eth0.100 entered promiscuous mode
[ 14.357464] device eth0 entered promiscuous mode
[ 14.368491] xenbr100: port 1(eth0.100) entering learning state
Waiting for xenbr100 to get ready (MAXWAIT is 20 seconds).
[ 23.369074] xenbr100: port 1(eth0.100) entering forwarding state
if-up.d/mountnfs[xenbr100]: waiting for interface eth0.100 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr100]: waiting for interface eth0.200 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr100]: waiting for interface xenbr200 before doing
NFS mounts (warning).
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 200 to IF -:eth0:-
[ 23.698451] device eth0.200 entered promiscuous mode
[ 23.711535] xenbr200: port 1(eth0.200) entering learning state
Waiting for xenbr200 to get ready (MAXWAIT is 20 seconds).
[ 32.712256] xenbr200: port 1(eth0.200) entering forwarding state
if-up.d/mountnfs[xenbr200]: waiting for interface eth0.100 before doing
NFS mounts (warning).
if-up.d/mountnfs[xenbr200]: waiting for interface eth0.200 before doing
NFS mounts (warning).
done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Loading the saved-state of the serial devices...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
[ 33.587386] ttyS1: LSR safety check engaged!
[ 33.591292] ttyS1: LSR safety check engaged!
/dev/ttyS1 at 0xf1c0 (irq = 17) is a 16550A
Setting sensors limits.
Setting console screen modes and fonts.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.
Starting NFS common utilities: statd.
Starting powernowd: required sysfs objects not found!
Read /usr/share/doc/powernowd/README.Debian for more information.
Not starting S.M.A.R.T. daemon smartd, disabled via
/etc/default/smartmontools (warning).
Starting network management services: snmpd.
Starting Xen daemons:[ 66.387718] Event-channel device installed.
xenfs xenstored xenconsoled xend[ 67.150428] XENBUS: Unable to read
cpu state
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
